MEDIC THERAPEUTICS MT-PAINLASER-001 (01) PDF MANUAL

Laser therapy delivers non-thermal photons of light to injured cells; the cells are stimulated and develop a higher rate of metabolism. This results in pain relief, improved circulation and anti-inflammation, accelerating the healing process.

Avoid looking directly at the light.

Keep out of reach of children to prevent injuries to their eyes.

Do not use if you have a pacemaker, as the laser can interfere with the performance of the pacemaker.

While using the device, overall wellness and exercise will help support and enhance your metabolism.

When using the device, please keep light emitting ports clean. Otherwise, the loss of light during treatment time will increase, decreasing the effectiveness of the therapy.

Symptoms like: thirst, dry eyes, dizziness or increased pulse rate are normal following use.

If the device is not used over a long period of time, make sure to charge the device every 4-6 months to preserve and maintain the battery.

The main parts include the Host (which has an LED Screen, On/Off button, and Time button), a Power adaptor (US plug and USB cable).

The LED Screen displays the Time and Battery status.

The device has one 808 laser diode and twelve 650nm laser diodes.

The power charger jack is located on the device, as indicated in the parts overview.

Press and hold the “On/Off” button. As the device turns on, the buzzer will make a “tick” sound. All the icons on the LED screen will light up briefly when turned on, then the default settings will be displayed on the screen (default settings: 05 minutes).

Press “Time” to adjust the treatment time. Time increases in increment of 5 minutes; treatment time is adjustable from 5 to 30 minutes. When “Time” is pressed, the buzzer will make a “tick” sound, and the time icon on the LED screen will change.

After setting the time, short press “Power” to initiate the treatment.

After the treatment has been completed, the buzzer will “tick”, the laser will stop and the LED screen will return to the settings status.

To pause during treatment, short press “Power”. The buzzer will “tick” and the time display will pause.

Time cannot be adjusted during treatment process.

Use the included protective glasses during treatment to avoid impairing your eyes.

Press and hold the “On/Off” button to turn the device off. The buzzer will “tick”.

Yes, the device has an automatic shutdown function to save energy; the device will automatically turn off after 2 minutes if not in use.

Hover the handheld laser over the desired treatment area at a distance of 0.42in – 0.78in away from your skin. Do not perform the treatment over clothing or any creams/ointments/dressings. Feeling a warm sensation during use is normal.

Recommended use is once or twice a day for 20 minutes at a time. 10-15 days is considered one full treatment course. Take 5-7 day intervals between treatment courses.

Charge when the battery icon appears on the LED screen to preserve the battery life of the device.

Insert end A of the power adaptor to a household socket (110V-220V) and insert end B of the power adaptor to the device for charging. The buzzer will “tick” twice and the battery icon on the LED screen will show that the device is charging. When the device is fully charged, the battery icon displays a full battery symbol.

The charging time should last 10 hours for the first 3 uses.

Only use the included power adaptor to avoid damaging the device.

If the device malfunctions, check the “Trouble-shooting Instructions”. If the problems aren’t listed, contact the authorized service provider. Don’t disassemble or repair by yourself or risk voiding the warranty.

Dampen a cotton bud with a gentle neutral cleaner to clean the dirty surface of the device. Don’t use organic solvents, gas etc. to clean.

Dampen a cotton bud with alcohol to gently clean the light emitting ports or lasers. Never soak or scrape to clean.

Keep the device away from humidity, high temperatures and direct exposure to sunlight to extend the life of device.

Do not place device against hard objects to avoid scratches or damage to the lasers.

If the device is not used for a long time, please charge it at least every 4 to 6 months, which is beneficial for battery maintenance. If the battery isn’t operating properly, it should be returned to the manufacturer for re-activation or replacement.

Avoid exposure to strong shocks, vibration, snow and rain. Always store in a dry, well-ventilated room, free from corrosive gas.