Free English LINX HYPNOS ZERO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LINX HYPNOS ZERO (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What features are included with the LINX HYPNOS ZERO?
The LINX HYPNOS ZERO offers the following features:
Wickless
Variable temperature
All ceramic heating chamber
Medical grade stainless steel construction
Portable size
What items are included in the box for the LINX HYPNOS ZERO?
The following components are included with the LINX HYPNOS ZERO:
1 650 mAh Hypnos Zero Battery
1 Hypnos Zero Wickless Atomizer
2 Glass Mouthpieces
1 Filter Section
1 USB Charger
How do I charge the LINX HYPNOS ZERO?
Step 1. Screw the USB Charger on the battery and plug it into a viable USB power outlet.
Step 2. Observe the Power Indicator on the charger; it will glow red while charging and will turn green once the device is fully charged.
What is the procedure for vaping with the LINX HYPNOS ZERO?
Step 1. Load contents into the Atomizer.
Step 2. Screw the mouthpiece onto the top of the Atomizer.
Step 3. Inhale while holding down the Power Button.
How do I adjust the temperature settings on the LINX HYPNOS ZERO?
To toggle between the four available temperature settings, press the Power Button three (3) times quickly.
What do the different light colors indicate for the temperature settings on the LINX HYPNOS ZERO?
The following table lists the temperature levels and their corresponding light colors:
| Indicator Color | Temperature Level |
| Blue | low |
| Green | medium |
| Yellow | medium high |
| Red | high |
How do I lock or unlock the LINX HYPNOS ZERO?
To turn the device on or off, press the Power Button five (5) times quickly. Upon completion, the button will blink white five (5) times.
What is the overheat protection feature on the LINX HYPNOS ZERO?
If the Power Button is held down for fifteen (15) seconds, the battery will enter standby mode to prevent overheating. This state is indicated by the button blinking white ten (10) times.
How can I exit standby mode on the LINX HYPNOS ZERO?
To exit the standby mode, press the Power Button five (5) times.
CLICK HERE TO DOWNLOAD LINX HYPNOS ZERO (01) PDF DOCUMENT