KRAMER ELECTRONICS 670RN (01) PDF MANUAL

KRAMER ELECTRONICS 670RN (01) PDF SUMMARY:

What should I do when I first receive the 670T or 670RN?

Unpack the equipment carefully and save the original box and packaging materials for possible future shipment. Review the contents of the user manual.

---

How can I find up-to-date user manuals, application programs, and firmware upgrades?

Go to http://www.kramerelectronics.com/support/product_downloads.asp.

---

What is recommended for achieving the best performance?

• Use only good quality connection cables (Kramer high-performance, high-resolution cables are recommended) to avoid interference, deterioration in signal quality, and elevated noise levels.
• Do not secure the cables in tight bundles or roll the slack into tight coils.
• Avoid interference from neighboring electrical appliances that may adversely influence signal quality.
• Position your Kramer 670T, 670RN away from moisture, excessive sunlight, and dust.

---

Where can the equipment be used?

This equipment is to be used only inside a building and may only be connected to other equipment that is installed inside a building.

---

Are there any operator serviceable parts inside the unit?

No, there are no operator serviceable parts inside the unit.

---

What power adapter should I use?

Use only the Kramer Electronics input power wall adapter that is provided with the unit.

---

What should I do before installing the unit?

Disconnect the power and unplug the unit from the wall before installing.

---

What should I avoid when using the optic connectors?

Avoid direct eye exposure into the optic connectors when powered.

---

How do I install the 670T or 670RN?

Attach the rubber feet and place on a table or mount the 670T, 670RN in a rack (using an optional RK-3T rack mount).

---

What should I do before connecting devices to the 670T or 670RN?

Always switch off the power on each device before connecting it to your 670T, 670RN.

---

What cables should I use to connect AV equipment to the 670T or 670RN?

Always use Kramer high-performance cables.

---

How do I connect the power?

Connect the 5V DC power adapter to the 670T, 670RN and plug the adapter into the mains electricity.

---

How do I connect the 670T and 670RN?

1. Connect an HDMI source to the HDMI IN connector.
2. Connect the HDMI OUT connector to an HDMI acceptor.
3. Remove the dust caps and connect the OPTIC CABLE connector of the 670T to the OPTIC CABLE connector of the 670RN, via optic OM3 cabling with SC connectors.
4. Connect the 5V DC power adapter to the power socket on each unit and connect the adapter to the mains electricity.

---

What are the functions of the LEDs on the 670T HDMI Optical Transmitter?

• CONNECTED FIBER: Illuminates when the fiber optic cable is connected.
• SOURCE: Illuminates when a source is connected.
• HOT PLUG: Indicates a connected display on the receiver side.
• VIDEO DETECT: Indicates a valid video signal on the transmitter side.
• ON: Illuminates when receiving power.

---

What are the functions of the LEDs on the 670RN HDMI Optical Receiver?

• FIBER: Lights when the fiber optic cable is connected.
• SOURCE: Lights when a source is connected.
• HOT PLUG: Indicates a connected display on the receiver side.
• VIDEO DETECT: Indicates a valid video signal on the transmitter side.
• ON: Illuminates when receiving power.

---

What should I do if I need to return the 670T or 670RN for service?

Save the original box and packing materials.

---

What is the maximum transmission range of the 670T and 670RN at 1080p @60Hz?

The transmission range is 1700m (more than 5570ft).

---

What is the maximum transmission range of the 670T and 670RN at 4K x 2K?

The transmission range is up to 400m (1300ft).

---

What type of fiber optic cable and connectors are used?

SC connectors for multimode (OM3) fiber cable.

---

What is the maximum insertion loss from transmitter to receiver?

The insertion loss must not exceed 10dB.