KOGAN KAMN32UC6JB (01) PDF Document

Please adhere to the following safety guidelines when using your KOGAN KAMN32UC6JB monitor:

• Read all instructions before using the product and retain them for reference.

• Unplug the monitor before cleaning it.

• Use a clean, slightly dampened cloth to wipe the main monitor body.

• To clean the screen, turn it off, unplug it, and wait for it to cool completely, then wipe it with a dry micro-fibre cloth.

• Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.

• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.

• Do not insert any object or spray any liquid into the vents.

• Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat, as well as in rooms lacking adequate ventilation.

• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.

• Unplug the monitor if it is not going to be used for an extended period.

• Do not place heavy objects on the monitor, its power cord, or any connected cable.

• Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

The following components are included with your KOGAN KAMN32UC6JB monitor:

• Monitor

• Stand Arm

• Stand Base

• M4x10mm Screw (x2)

• Power Cable

• Power Adaptor

• HDMI Cable

• USB-C Cable

• User Guide

The control buttons on the KOGAN KAMN32UC6JB have the following functions:

1. A (Auto/Exit Button): Exits the current menu or returns to the previous menu.

2. M (Menu/Select Button): Enters the OSD menu or confirms a selection.

3. Right/Up Shortcut Button: Navigates right or up in the menu.

4. Left/Down Shortcut Button: Navigates left or down in the menu.

5. Power Button: Turns the monitor on or off.

The KOGAN KAMN32UC6JB monitor is equipped with the following ports:

1. DC Port

2. HDMI 2 Port

3. HDMI 1 Port

4. DP Port

5. USB-C Port

6. Earphone Port

Follow these steps to assemble the stand:

1. Lay the Monitor on a cloth with the screen facing down to prevent damage.

2. Insert the Stand Arm into the rear casing of the Monitor.

3. Secure the Stand Base to the Stand Arm using the two provided M4x10mm Screws.

4. Stand the monitor upright. Installation is now complete.

Note: Ensure both your laptop/device and the monitor are powered off before connecting them.

1. Connect one end of the provided power cable to the DC port on the monitor.

2. Connect the other end of the power cable to the provided power adaptor.

3. Connect the power adaptor to an electrical outlet.

To connect a device via HDMI, connect one end of the provided HDMI cable to one of the HDMI ports on the monitor and connect the other end to the HDMI port on your device (e.g., PC).

To connect a device via DisplayPort, connect one end of a DP cable (not provided) to the DP Port on the monitor and connect the other end to the DP port on your device (e.g., Laptop or PC).

To connect via USB-C:

• Connect one end of the provided USB-C cable to the USB-C port on the monitor and connect the other end to your device (e.g., Laptop or PC).

• The USB-C connection allows you to charge your device using the monitor or transfer data.

Connect one end of an audio cable (not provided) to the Earphone port on the monitor, and the other end to your earphones.

You can adjust the monitor’s settings through the OSD menu. The available settings are listed below: