Free English KENWOOD KDC-BT372U (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KENWOOD KDC-BT372U (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the general operational instructions for the KENWOOD KDC-BT372U?
To operate the KENWOOD KDC-BT372U:
| To | On the faceplate |
|---|---|
| Turn on the power | Press SRC. Press and hold SRC to turn off the power. |
| Adjust the volume | Turn the volume knob. |
| Select a source | Press SRC repeatedly. |
| Change the display information | Press DISP repeatedly. |
How do I perform the initial setup on the KENWOOD KDC-BT372U?
Select the display language and cancel the demonstration:
When you turn on the power for the first time (or after a factory reset), the display shows: “SEL LANGUAGE” → “PRESS” → “VOLUME KNOB”.
1. Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup.
2. The display then shows: “CANCEL DEMO” → “PRESS” → “VOLUME KNOB”.
3. Press the volume knob. [YES] is selected for the initial setup.
4. Press the volume knob again. “DEMO OFF” appears.
Set the clock and date:
1. Press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [CLOCK], then press the knob.
3. To adjust the clock, turn the volume knob to select [CLOCK ADJUST], then press the knob. Set the Hour and Minute, pressing the knob after each setting.
4. To set the clock format, turn the volume knob to select [CLOCK FORMAT], then press the knob. Select [12H] or [24H], then press the knob.
5. To set the date, turn the volume knob to select [DATE FORMAT], then press the knob. Select [DD/MM/YY] or [MM/DD/YY], then press the knob.
6. Turn the volume knob to select [DATE SET], then press the knob. Set the Day, Month, and Year, pressing the knob after each setting.
7. Press and hold the back button to exit.
Set the initial settings:
1. Press SRC repeatedly to enter STANDBY.
2. Press the volume knob to enter [FUNCTION].
3. Turn the volume knob to select an item from the settings table, then press the knob.
4. Repeat step 3 until the desired item is selected or activated.
5. Press and hold the back button to exit.
What are the initial settings available on the KENWOOD KDC-BT372U?
| AUDIO CONTROL | |
|---|---|
| SWITCH PREOUT | REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear. |
| DISPLAY | |
| EASY MENU | ON: ZONE 1 illumination changes to white color when entering [FUNCTION]. OFF: ZONE 1 illumination remains as [COLOR SELECT] color. |
| TUNER SETTING | |
| PRESET TYPE | NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel. |
| SYSTEM | |
| KEY BEEP | ON: Activates the keypress tone. OFF: Deactivates. |
| SOURCE SELECT | |
| PANDORA SRC | ON: Enables PANDORA in source selection. OFF: Disables. |
| IHEART SRC | ON: Enables IHEARTRADIO in source selection. OFF: Disables. |
| SPOTIFY SRC | ON: Enables SPOTIFY in source selection. OFF: Disables. |
| BUILT-IN AUX | ON: Enables AUX in source selection. OFF: Disables. |
| CD READ | 1: Automatically distinguishes between audio file disc and music CD. 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played. |
| F/W UPDATE | |
| UPDATE SYSTEM | F/W UP xxxx: YES to start upgrading the firmware, or NO to cancel. |
| FACTORY RESET | YES: Resets the settings to default (except the stored station). NO: Cancels. |
| CLOCK | |
| CLOCK DISPLAY | ON: The clock time is shown on the display even when the unit is turned off. OFF: Cancels. |
| ENGLISH / ESPANOL | Select the display language for [FUNCTION] menu and music information if applicable. |
How do I operate the radio on the KENWOOD KDC-BT372U?
Search for a station:
1. Press SRC repeatedly to select RADIO.
2. Press BAND repeatedly to select FM1/FM2/FM3/AM.
3. Press the seek buttons (left/right arrows) to search for a station.
To change the searching method, press the SEEK button repeatedly:
• AUTO1: Automatically search for a station.
• AUTO2: Search for a preset station.
• MANUAL: Manually search for a station.
To store a station: Press and hold one of the number buttons (1 to 6).
To select a stored station: Press one of the number buttons (1 to 6).
How do I use the playback controls for CD, USB, iPod, or Android sources on the KENWOOD KDC-BT372U?
| Action | On the faceplate |
|---|---|
| Playback/pause | Press the play/pause button. |
| Reverse/Fast-forward | Press and hold the seek buttons (left/right arrows). |
| Select a track/file | Press the seek buttons (left/right arrows). |
| Select a folder | Press the up/down arrow buttons. |
| Repeat play | Press the ‘4’ button repeatedly.
• Audio CD: TRACK REPEAT/ALL REPEAT • MP3/WMA/etc.: FILE REPEAT/FOLDER REPEAT/ALL REPEAT • iPod/Android: FILE REPEAT/FOLDER REPEAT/REPEAT OFF |
| Random play | Press the ‘3’ button repeatedly.
• Audio CD: DISC RANDOM/RANDOM OFF • MP3/WMA/etc., iPod/Android: FOLDER RANDOM/RANDOM OFF Press and hold the ‘3’ button to select ALL RANDOM (CD MP3/WMA/AAC files only). |
How do I search for files on a CD, USB, or Android device with the KENWOOD KDC-BT372U?
Select a file from a folder/list:
1. Press the search button.
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.
Quick Search:
If you have many files, you can search through them quickly by turning the volume knob quickly to browse through the list.
Skip Search (iPod USB and Android):
Press the seek buttons to search at a preset skip search ratio. Pressing and holding searches at a 10% ratio.
Alphabet search (iPod USB and Android):
For iPod USB source:
1. Turn the volume knob quickly to enter character search.
2. Turn the volume knob to select a character.
3. Press the seek buttons to move the entry position.
4. Press the volume knob to start searching.
For Android source:
1. Press the up/down arrow buttons to enter character search.
2. Turn the volume knob to select the character.
3. Press the volume knob to start searching.
How do I connect and use a device with the AUX input on the KENWOOD KDC-BT372U?
Preparation:
Select [ON] for [BUILT-IN AUX] in the [SOURCE SELECT] menu.
Start listening:
1. Connect a portable audio player to the auxiliary input jack using a 3.5 mm stereo mini plug.
2. Press SRC repeatedly to select AUX.
3. Turn on the portable audio player and start playback.
Set the AUX name:
1. While listening to the AUX source, press the volume knob to enter [FUNCTION].
2. Turn the volume knob to select [SYSTEM], then press the knob.
3. Turn the volume knob to select [AUX NAME SET], then press the knob.
4. Turn the volume knob to select a name (AUX, DVD, PORTABLE, GAME, VIDEO, TV), then press the knob.
5. Press and hold the back button to exit.
How do I pair and connect a Bluetooth device to the KENWOOD KDC-BT372U?
Pair and connect a Bluetooth device for the first time:
1. Press SRC to turn on the unit.
2. Search and select the unit model name (KDC-X3**/KDC-BT3**/etc.) on your Bluetooth device.
3. “PAIRING” → “PASS XXXXXX” → Device name → “PRESS” → “VOLUME KNOB” appears on the display.
4. Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed.
Once pairing is completed, the Bluetooth connection is established automatically. The “BT1” and/or “BT2” indicator on the faceplate will light up. This unit supports Secure Simple Pairing (SSP) and can register up to five devices. A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.
Auto Pairing:
When you connect an iPhone/iPod touch/Android device to the USB input terminal, a pairing request is automatically activated if the Bluetooth function on the device is on and [AUTO PAIRING] is set to [ON] in the unit’s settings. Press the volume knob to pair once you have confirmed the device name.
How do I make and receive phone calls using the KENWOOD KDC-BT372U?
Receive a call:
To answer an incoming call, press the phone button, the volume knob, or one of the number buttons (1 to 6). To reject a call, press the back button. To end a call, press the back button.
Make a call:
1. Press the phone button to enter Bluetooth mode.
2. Turn the volume knob to select an option: [CALL HISTORY], [PHONE BOOK], [NUMBER DIAL], or [VOICE], then press the knob.
3. Follow the on-screen instructions to select a contact or dial a number.
4. Press the volume knob to initiate the call.
Make a call using voice recognition:
1. Press and hold the phone button to activate the voice recognition of the connected phone.
2. Speak the name of the contact you want to call or the voice command to control the phone functions.
What audio settings can be adjusted on the KENWOOD KDC-BT372U?
| Setting | Description |
|---|---|
| SUB-W LEVEL | Adjusts the subwoofer output level (–50 to +10). |
| MANUAL EQ | Adjusts the 13-band graphic equalizer. |
| PRESET EQ | Selects a preset equalizer curve (NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER). |
| BASS BOOST | Selects a bass boost level (LEVEL1 to LEVEL5 or OFF). |
| LOUDNESS | Boosts low and high frequencies at low volume levels (LEVEL1, LEVEL2, or OFF). |
| SUBWOOFER SET | Turns the subwoofer output ON or OFF. |
| FADER | Adjusts the rear and front speaker output balance (R15 to F15). |
| BALANCE | Adjusts the left and right speaker output balance (L15 to R15). |
| VOLUME OFFSET | Presets the initial volume level of each source (–15 to +6). |
What are the display settings on the KENWOOD KDC-BT372U?
| Setting | Description |
|---|---|
| COLOR SELECT | Selects color for ALL ZONE, ZONE 1, and ZONE 2 separately from preset colors or a custom R/G/B setting. |
| DIMMER | ON: Dimmer is turned on. OFF: Cancels. DIMMER TIME: Set the dimmer on and off time. |
| BRIGHTNESS | Select your preferred brightness level for the selected zone (0 to 31). |
| TEXT SCROLL | AUTO/ONCE: Select whether to scroll the display information automatically or scroll only once. OFF: Cancels. |
What should I do if the sound cannot be heard from my KENWOOD KDC-BT372U?
If you cannot hear any sound from your KENWOOD KDC-BT372U, please check the following:
• Adjust the volume to the optimum level.
• Check the cords and connections for any issues.
• If the display is correct but there’s no sound, try cleaning the connectors.
What does the “MISWIRING CHECK WIRING THEN PWR ON” message mean on the KENWOOD KDC-BT372U?
This message indicates a potential wiring issue. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. After checking, turn the power on again.
Why does the KENWOOD KDC-BT372U not work at all?
If the unit does not work at all, try resetting the unit. You can also clean the connectors if the display information is incorrect or the unit does not turn on.
How do I troubleshoot poor radio reception on the KENWOOD KDC-BT372U?
If you are experiencing poor radio reception or static noise while listening to the radio, ensure that the antenna is connected firmly.
What can I do if a disc cannot be ejected from the KENWOOD KDC-BT372U?
Press and hold the eject button to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.
What do the error messages on the KENWOOD KDC-BT372U CD/USB/iPod player mean?
| Symptom/Message | Remedy |
|---|---|
| “NA FILE” | Make sure the disc contains supported audio files. |
| “NO DISC” | Insert a playable disc into the loading slot. |
| “TOC ERROR” | Make sure the disc is clean and inserted properly. |
| “PLEASE EJECT” | Reset the unit. If this does not solve the problem, consult your nearest service center. |
| “NO DEVICE” | Connect a USB device, and change the source to USB again. |
| “COPY PRO” | A copy-protected file is played. |
| “UNSUPPORTED DEVICE” | Check whether the connected device is compatible and reattach it. |
| “iPod ERROR” | Reconnect the iPod and/or reset the iPod. |
How do I troubleshoot Bluetooth issues on the KENWOOD KDC-BT372U?
| Symptom | Remedy |
|---|---|
| No Bluetooth device is detected. | Search from the Bluetooth device again or reset the unit. |
| Bluetooth pairing cannot be made. | Make sure you have entered the same PIN code to both devices. Delete pairing information from both devices and perform pairing again. |
| Echo or noise is heard during a phone conversation. | Adjust the microphone unit’s position. Check the [ECHO CANCEL] setting. |
| Phone sound quality is poor. | Reduce the distance between the unit and the Bluetooth device. Move the car to a place where you can get a better signal reception. |
| Voice calling method is not successful. | Use voice calling in a quieter environment. Reduce the distance from the microphone. Ensure you use the same voice as the registered voice tag. |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD KENWOOD KDC-BT372U (01) PDF DOCUMENT