Free English JOHN DEERE Z710A (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JOHN DEERE Z710A (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the recommended interval for replacing the Engine Oil Filter on the JOHN DEERE Z710A?
The Engine Oil Filter (Part No. AM125424) on the JOHN DEERE Z710A should be replaced at intervals of 5, 100, or 200 hours of operation.
What is the required capacity of Turf Gard 10W30 Engine Oil for the JOHN DEERE Z710A?
The JOHN DEERE Z710A requires 2.0 qt of Turf Gard 10W30 Engine Oil (Part No. TY22029).
What is the recommended interval for replenishing Turf Gard 10W30 Engine Oil on the JOHN DEERE Z710A?
Turf Gard 10W30 Engine Oil (Part No. TY22029) should be replenished at intervals of 5, 100, or 200 hours of operation on the JOHN DEERE Z710A.
What is the recommended interval for applying Multi Purpose SD Polyurea Grease on the JOHN DEERE Z710A?
Multi Purpose SD Polyurea Grease (Part No. TY6341) on the JOHN DEERE Z710A should be applied as needed.
What parts are needed in the first 250 hours of operation for the JOHN DEERE Z710A?
The parts needed in the first 250 hours of operation for the JOHN DEERE Z710A are listed in the following table:
| Qty | Part No | Item | Capacity | Interval In Hours |
| 3 | AM125424 | Engine Oil Filter | 5/100/200 | |
| 6 | TY22029 | 1 qt Turf Gard 10W30 Engine Oil | 2.0 qt | 5/100/200 |
| 3 | TY6341 | Multi Purpose SD Polyurea Grease (14 oz) | As Needed |
What parts are listed as “As Needed” for the JOHN DEERE Z710A?
The parts listed as “As Needed” for the JOHN DEERE Z710A are:
Part Number M144100 is the Air Filter – Precleaner.
Part Number M144098 is the Air Filter.
Part Number MIU11299 is the Spark Plug.
Part Number TCU26349 is the Belt – Traction Drive.
Part Number TCA16216 is the Filler Cap.
Part Number AM125504 is the Ignition Key.
Part Number AM130907 is the Mower Deck Leveling Gauge.
Part Number TY26183 is the Grease Gun.
What are the part numbers for the various components related to the electrical system and engine on the JOHN DEERE Z710A?
The part numbers for engine and electrical components on the JOHN DEERE Z710A are:
Part No. AM125424 is the ENGINE OIL FILTER.
Part No. M144100 is the AIR FILTER – PRIMARY.
Part No. M144098 is the AIR FILTER – SECONDARY.
Part No. AM116304 is the FUEL FILTER.
Part No. MIA881446 is the TRANSMISSION FILTER.
Part No. MIU11299 is the SPARK PLUG.
Part No. TY25878 is the BATTERY.
Part No. TCA15075 is the IGNITION SWITCH.
Part No. AM125504 is the IGNITION KEY.
Part No. TCA17834 is the PTO SWITCH.
Part No. TCA19812 is the PTO CLUTCH.
Part No. MIA11473 is the STARTER.
Part No. AM106305 is the RELAY.
Part No. AM117324 is the SWITCH – HEADLIGHT (OPTIONAL).
Part No. R136239 is the HEADLIGHT BULB – (OPTIONAL).
Part No. AM125447 is the HEADLIGHT – (OPTIONAL).
Part No. TCA16216 is the FILLER CAP.
Part No. TCA103119 is the SEAT SWITCH.
What are the part numbers associated with the drive system components for the JOHN DEERE Z710A?
The components related to the drive system for the JOHN DEERE Z710A include:
Part No. TCU26349 is the V-BELT – TRACTION DRIVE.
Part No. TCA16958 is the MUFFLER.
Part No. M149198 is the GASKET.
Part No. TCA13769 is the CASTER WHEEL ASSY.
Part No. TCU15970 is the TIRE – CASTER – 13X5.00-6 SMOOTH.
Part No. TCA16941 is the TIRE & WHL ASSY – REAR – 48″.
Part No. TCA19832 is the TIRE & WHL ASSY – REAR – 54″.
Part No. TCA18026 is the SEAT ASSEMBLY.
What are the parts required for the 48 in deck on the JOHN DEERE Z710A?
The parts for the 48 in deck on the JOHN DEERE Z710A are detailed below:
| key | part no. | description | key | part no. | description |
| 1 | TCU26290 | BELT | 13 | M127517 | SPACER |
| 2 | TCU27010 | EXTENSION SPRING | 14 | M127198 | SEAL |
| 3 | AM106627 | IDLER | 15 | M133398 | WASHER |
| 4 | TCA19530 | IDLER | 16 | M134382 | SPINDLE |
| 5 | TCU26965 | SHEAVE ASSEMBLY | 17 | M134305 | DEFLECTOR |
| 6 | JD7849 | LUBRICATION FITTING | 18 | TCA17517 | SPINDLE KIT |
| 7 | M123569 | FLANGE NUT | 19 | M136194 | BLADE (3) – MED LIFT (STD) |
| 8 | TCU23180 | HUB | TCU14939 | BLADE (3) – HI LIFT | |
| 9 | M123581 | DEFLECTOR | M136185 | BLADE (3) – MULCHING | |
| 10 | M125913 | BUSHING | 20 | M123522 | WASHER |
| 11 | M85699 | SEAL | 21 | M123520 | WASHER |
| 12 | M88251 | BALL BEARING | 22 | 19M7489 | CAP SCREW |
The “As Needed” Parts for the 48 in deck on the JOHN DEERE Z710A are:
| Qty | Part Number | Item |
| 3 | M136194 | Blades – 48 in – Med Lift (Std) |
| 3 | TCU14939 | Blades – 48 in – Hi Lift |
| 3 | M136185 | Blades – 48 in – Mulching |
| 1 | TCU26290 | Belt |
What are the parts required for the 54 in deck on the JOHN DEERE Z710A?
The parts for the 54 in deck on the JOHN DEERE Z710A are detailed below:
| key | part no. | description | key | part no. | description |
| 1 | TCU26291 | BELT | 14 | M127198 | SEAL |
| 2 | TCU24629 | EXTENSION SPRING | 15 | M133398 | WASHER |
| 3 | AM106627 | IDLER | 16 | M134382 | SPINDLE |
| 4 | TCA19530 | IDLER | 17 | M134305 | DEFLECTOR |
| 5 | TCY28215 | SHEAVE ASSEMBLY | 18 | TCA17517 | SPINDLE |
| 6 | JD7849 | LUBRICATION FITTING | M136195 | BLADE – 54″ (3) – MED LIFT (STD) | |
| 7 | M123569 | FLANGE NUT | M144652 | BLADE – 54″ (3) – HI LIFT | |
| 8 | TCU23180 | HUB | M135334 | BLADE – 54″ (3) – MULCH ING | |
| 9 | M123581 | DEFLECTOR | 20 | M123522 | WASHER |
| 10 | M125913 | BUSHING | 21 | M123520 | WASHER |
| 11 | M88251 | BALL BEARING | 22 | 19M7489 | CAP SCREW |
| 12 | M85699 | SEAL | |||
| 13 | M127517 | SPACER |
The “As Needed” Parts for the 54 in deck on the JOHN DEERE Z710A are:
| Qty | Part Number | Item |
| 3 | M136195 | Blade 54 in – Med Lift |
| 3 | M144652 | Blade 54 in – Hi Lift |
| 3 | M1335334 | Blade – 54 in – Mulching |
| 1 | TCU26291 | Belt – 54 in |
CLICK HERE TO DOWNLOAD JOHN DEERE Z710A (01) PDF DOCUMENT