JATA JCTV1206 (01) PDF Document

The main components of the JATA JCTV1206 fan heater are:

1. Power selector

2. Adjustable thermostat knob

3. Air outlet grid

The technical data for the JATA JCTV1206 is as follows:

Model: JCTV1206

Voltage: 220-240 V~

Frequency: 50-60Hz

Power: 2000 W

Please observe the following safety instructions when using the JATA JCTV1206 fan heater:

• This appliance is intended only for well-insulated spaces or occasional use.

• Keep all plastic bags and packaging components out of the reach of children as they are potentially dangerous.

• Do not connect the appliance to the mains without checking that the voltage on the rating plate and that of your household are the same.

• Do not use this heating device in the immediate surroundings of a bathtub, shower, or swimming pool.

• Do not use this heater if it has been dropped.

• Do not use if there are visible signs of damage to the heater.

• Use this heater on a flat and stable surface, or fix it to the wall, as applicable.

• Manipulation or replacement of any component must be performed by an authorized service center.

• To avoid overheating, do not cover the heater.

• CAUTION: Some parts of this appliance may become hot and cause burns. Particular attention should be made when children and vulnerable people are present.

• Do not dampen it nor immerse it in water.

• Do not place the heater under or in front of any plug.

• Don’t allow children to play with the appliance. Keep the appliance out of the reach of children.

• WARNING: To reduce the risk of fire, keep textiles, curtains, or other flammable material at a minimum distance of 1 m from the air outlet.

• Allow at least one meter of space around the heater for air to circulate normally.

• Always place the heater in the correct position and stand it on a firm, solid horizontal base (not on specially quilted carpets).

• Do not rest the power cable on hot parts of the appliance and avoid placing it in the air output grid.

• This appliance incorporates a safety device which will disconnect the resistance in case of overheating.

• If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service, or similar qualified personnel in order to avoid a danger.

The JATA JCTV1206 fan heater can be used under the following conditions:

• This appliance can be used by children aged 8 or more and people with physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given appropriate supervision or instruction concerning the safe use of the appliance and understand the dangers involved.

• Children under 3 years should be kept out of reach of the appliance unless constantly supervised.

• Children ages 3 and under 8 should only be able to turn on and off the unit, provided that it has been placed or installed in its normal operating position and they are supervised or have been instructed on its safe use and understand the risks. Children ages 3 and under 8 years old should not plug, regulate, or clean the appliance, nor perform maintenance.

• Cleaning and maintenance done by users cannot be done by children without any supervision.

Yes, there is a specific warning for using the JATA JCTV1206 in small rooms. WARNING: Do not use this heater in small rooms that are occupied by people who cannot leave the room themselves, unless permanent surveillance is provided.

Follow these steps to operate the JATA JCTV1206 fan heater:

1. Plug the appliance into the mains.

2. Turn the thermostat knob (2) clockwise to the maximum position.

3. Turn the power selector (1) to the desired position. The fan heater will start to work.

• Fan Position: The appliance will work as a fan and only give cold air.

• Position “1”: Minimum power.

• Position “2”: Maximum power.

• Position “0”: Off.

4. When the room reaches the desired temperature, turn the thermostat knob (2) anti-clockwise until an acoustic signal is heard and the operation of the fan heater stops. The thermostat will automatically maintain the selected temperature.

For maintenance and cleaning of the JATA JCTV1206:

• Before you proceed to cleaning, ensure the appliance is unplugged.

• Allow the appliance to cool and then clean it with a soft, dry cloth.

• It is important to keep the air intake and output grids clean of dust and fluff.

• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of the appliance.

For environmental protection, please follow these guidelines:

• Dispose of the appliance according to local garbage regulations.

• Never throw it away in the rubbish. By disposing of it correctly, you will help improve the environment.

The following table outlines the information requirements for the JATA JCTV1206 electric local space heater, model identifier JCTV1206.