Free English JATA HBAS1291 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JATA HBAS1291 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up my JATA HBAS1291 scale for first use?
To set up your JATA HBAS1291 scale, follow these steps:
1. The scale works with 2 batteries type LR03 (AAA) of 1.5 V (not included).
2. Open the lid of the batteries compartment and insert them.
3. Place the scale on a horizontal and rigid surface.
4. Do not place the scale on carpets or any other soft surface, as the weight given would be erroneous.
5. Ensure the surface where you place the bathroom scale and the platform of the scale is dry to avoid slipping.
How do I select the desired weight unit on the JATA HBAS1291 scale?
Before using the JATA HBAS1291 scale, push the switch situated on the lower part to select the desired weight measure. The options are:
• KG (kilograms)
• LB (pounds)
• ST (pounds stones)
What is the correct way to weigh myself using the JATA HBAS1291?
To correctly use the JATA HBAS1291 scale:
1. Get on the scale by putting first one foot slowly on the platform and next the other.
2. Stand for a few seconds until your weight shows on the display and flashes, and then stays on.
3. Do not jump on or off the scale.
The appliance switches off automatically a few seconds after carrying out the weighing operation. It is advisable to always weigh yourself at the same time, preferably before breakfast.
How should I clean my JATA HBAS1291 scale?
To clean your JATA HBAS1291 scale, do not immerse the body of the appliance in water. If necessary, clean the scale with a damp cloth. Do not use chemical or abrasive products, such as metallic scourers, as they may deteriorate the surfaces of the appliance.
What does the “EEEE” message on the display of my JATA HBAS1291 mean?
If “EEEE” shows on the display of your JATA HBAS1291, it means the maximum weight of the scale has been exceeded.
What should I do when the “Lo” symbol appears on my JATA HBAS1291 display?
When the “Lo” symbol is shown on the display, you must proceed to change the batteries. To do that, open the cover placed in the back side of the appliance and replace the batteries, respecting the indicated polarities.
What should I do if my JATA HBAS1291 scale’s display is showing irregularities or it won’t switch off?
The JATA HBAS1291 scale is a sensitive electronic instrument. Some appliances of high frequency such as mobiles, radio stations, remote controls, and microwaves can cause disturbances if the scale is used near them. Keep it far away from these points if you notice irregularities on the display.
If there is any anomaly in the display or the scale doesn’t switch off automatically, remove the battery for a few seconds and place it again. If the anomaly remains, replace the battery.
What are the intended uses for the JATA HBAS1291 scale?
The JATA HBAS1291 scale is designed for domestic use only. It is not apt for commercial transactions or medical purposes.
How should I properly dispose of the JATA HBAS1291 and its batteries?
Please follow these guidelines for disposal:
• Dispose of the appliance according to the local garbage regulations.
• Dispose of the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries into the rubbish to help with the improvement of the environment.
• The batteries must not be mixed with other domestic residues.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD JATA HBAS1291 (01) PDF DOCUMENT