Free English JATA HBAS1292 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JATA HBAS1292 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I power the JATA HBAS1292 scale?
The JATA HBAS1292 scale works with 2 batteries, type LR03 (AAA) of 1.5 V (not included). To install them, open the lid of the batteries compartment and insert them.
Where is the best place to set up the JATA HBAS1292 for an accurate reading?
Place the JATA HBAS1292 on a horizontal and rigid surface. Do not place it on carpets or any other soft surface, as the weight given would be erroneous. Also, ensure the surface where you place the scale and the platform of the scale is dry to avoid slipping.
How do I select the desired weight unit on the JATA HBAS1292?
Before using the JATA HBAS1292 scale, push the switch situated on the lower part to select the desired weight measure. The options are:
• KG (kilograms)
• LB (pounds)
• ST (pounds stones)
What is the correct procedure for weighing myself on the JATA HBAS1292?
1. Get on the scale by putting first one foot slowly on the platform and next the other.
2. Stand still for a few seconds until your weight shows on the display and flashes, and then stays on.
3. Do not jump on or off the scale.
The appliance switches off automatically a few seconds after carrying out the weighing operation.
Are there any best practices for using the JATA HBAS1292?
• It is advisable to always weigh yourself at the same time, preferably before breakfast.
• Do not leave anything on the scale while not in use. The appliance will use up the batteries.
How should I clean my JATA HBAS1292?
Do not immerse the body of the appliance in water. If necessary, clean the scale with a damp cloth. In cleaning, do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of the appliance.
What does the “EEEE” message on the display of the JATA HBAS1292 mean?
If “EEEE” shows on the display, it means the maximum weight of the scale has been exceeded.
What does the “Lo” symbol mean on the display of the JATA HBAS1292, and what should I do?
You must change the batteries when the “Lo” symbol is shown on the display. To do that, open the cover placed in the back side of the appliance and replace the batteries, respecting the indicated polarities.
What should I do if I notice irregularities on the display of my JATA HBAS1292?
The JATA HBAS1292 is a sensitive electronic instrument. Some appliances of high frequency such as mobiles, radio stations, remote controls, and microwaves can cause disturbances if the scale is used near them. Keep it far away from these points if you notice irregularities on the display.
What should I do if there is an anomaly on the display or if the JATA HBAS1292 doesn’t switch off automatically?
If there is any anomaly in the display or the scale doesn’t switch off automatically, remove the battery for a few seconds and place it again. If the anomaly remains, replace the battery.
Is the JATA HBAS1292 suitable for medical or commercial use?
No, the scale is not apt for commercial transactions or medical purposes. It is designed for domestic use only.
How should I dispose of the JATA HBAS1292 and its batteries?
• Dispose of the appliance according to the local garbage regulations.
• Dispose of the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries into the rubbish. This will help with the improvement of the environment.
• The batteries must not be mixed with other domestic residues.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD JATA HBAS1292 (01) PDF DOCUMENT