INSIGNIA NS-TRAVEL70W3C2A-C (01) PDF Document

The package for the INSIGNIA NS-TRAVEL70W3C2A-C includes:

• Travel adapter

• Quick Setup Guide

45W and 70W Models:

• Buttons

• LED indicator

• USB-A2 port

• USB-A1 port

• USB-C3 port

• USB-C2 port

• Multi-socket

• USA/JP socket

• USB-C1 port

• USA/AU/UK/EU plugs

20W Model:

• USB-C2 port

• USB-C1 port

• USB-A port

Warning: Failure to check the correct voltage could damage your device.

The INSIGNIA NS-TRAVEL70W3C2A-C adapter is suitable for use with most electronic devices up to 2400W at 240V and 1000W at 100V.

It can be used with small electric appliances such as:

• Laptops

• Small travel hair dryers

• Travel irons

• Electric fans

• Table lamps

• Electric razors

It can also be used with USB devices such as:

• Camera

• Smartphone

• Tablet

• Portable game console

• Bluetooth speaker

• Power bank

The INSIGNIA NS-TRAVEL70W3C2A-C adapter can accept and plug into Type A, B, C, D, E, F, G, H, I, J, L, N, and O outlets and plugs.

Note: Type K and M plugs are not accepted.

The built-in multi-country plugs can be selected to fit outlets in many different countries. To select a plug:

1. Locate the button for the country you are in (USA, Australia, Europe, or U.K.) and press and slide the plug configuration out from your travel adapter.

2. Make sure that the contact blades are turned to the parallel position (for USA, Europe, and U.K. only). Australia’s plug is flat angled, and Europe’s is round thin.

3. Press and hold the button to release and continue to pull up, until the plug is completely pulled to the top and then release the button. The button will reset and lock the plug.

Cautions:

• Make sure that the configuration button is completely reset when the plugs are retracted and pushed to the bottom. If the button is not reset, the plug has not been deactivated, which will affect use of the device.

• Only one plug configuration can be used at a time by sliding the selected configuration forward. The other plug configurations are automatically locked out.

Notes:

• The adapter (AC-AC) does not convert voltage.

• Do not use with appliances requiring a ground wire.

• Indoor use only.

• The internal safety switch in this adapter makes it certain that only one plug is energized at a time.

1. Make sure that your device is compatible and that you have selected the correct plug for the outlet.

2. Connect your device to the adapter and then plug the adapter into a power outlet.

The LED indicator is located on the front (the side with the USB ports) of your travel adapter. The LED indicates the following:

• LED solid: Normal operation.

• LED does not light: Possible overload. Unplug one device and check the status indicator again.

CAUTION: If your travel adapter is wet, dry it thoroughly before replacing the fuse.

1. Unplug your travel adapter from the wall socket.

2. Using a small coin, turn the fuse holder counter-clockwise to remove the fuse holder from your travel adapter.

3. Remove the burnt out fuse from the fuse holder and discard.

4. Using a small coin, turn the extra fuse holder counter-clockwise to remove the extra fuse from its holder.

5. Place the extra fuse into the fuse holder and reinstall it into your travel adapter.

6. To replace the extra fuse, purchase a new fuse (10A – 250Vac) and reinstall it into the extra fuse position in your travel adapter.

European Union: Albania, Algeria, Angola, Argentina, Austria, Azores, Balearic Islands, Bangladesh, Belgium, Bolivia, Bosnia, Brazil, Bulgaria, Burkina Faso, Burundi, Cameroon, Canary Island, Cape Verde, Central African Republic, Channel Islands, Chile, Comoros, Congo, Croatia, Cote d’ Ivoire, Cyprus, Denmark, Djibouti, Egypt, El Salvador, Equatorial Guinea, Eritrea, Faeroe Islands, Finland, France, Gabon, Germany, Gibraltar, Greece, Greenland, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, India, Indonesia, Iran, Iraq, Israel, Italy, Kazakhstan, Korea, Kuwait, Laos, Lebanon, Lithuania, Luxembourg, Macedonia, Madagascar, Madeira, Mali, Martinique, Mauritania, Mauritius, Monaco, Morocco, Mozambique, Myanmar, Nepal, Netherlands, Niger, Norway, Oman, Pakistan, Paraguay, Peru, Philippines, Poland, Portugal, Romania, Russia, Rwanda, Senegal, Somalia, Spain, Sudan, Suriname, Sweden, Switzerland, Syria, Thailand, Togo, Tunisia, Turkey, Uruguay, Vietnam, Zambia

Australia: American Samoa, Argentina, Australia, China, El Salvador, Fiji, Guatemala, Kiribati, Nauru, New Zealand, Panama, Papua New Guinea, St. Vincent, Tajikistan, Tonga, Uruguay

USA: American Samoa, Anguilla, Antilles, Aruba, Bahamas, Bangladesh, Barbados, Bermuda, Bolivia, Brazil, Cambodia Canada, Cayman Islands, China, Colombia, Costa Rica, Cuba Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Japan, Jamaica, Laos, Lebanon, Liberia, Maldives, Mexico, Micronesia, Montserrat, Netherlands, Nicaragua, Niger, Okinawa, Panama, Peru, Philippines, Puerto Rico, St. Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, United States, Venezuela, Vietnam, Virgin Islands (US and British), Yemen

United Kingdom: Bahrain, Bangladesh, Belize, Botswana, Brunei, Cameroon, Channel Islands, Cyprus, Dominica, El Salvador, Gambia, Ghana, Gibraltar, Grenada, Guatemala, Guyana, Hong Kong, Iraq, Ireland, Isle of Man, Jordan, Kuwait, Lebanon, Macau, Malawi, Malaysia, Maldives, Malta, Mauritius, Myanmar, Nigeria, Qman, Qatar, St. Lucia, St. Vincent, Saudi Arabia, Seychelles, Sierra Leone, Singapore, Tanzania, Uganda, United Arab Emirates, United Kingdom, Vietnam, Yemen, Zambia, Zimbabwe

Total output: 70W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1 = PD 70W

• USB-C2/C3/A1/A2 = 5V/3A

Use multiple ports:

• USB-C1+C2/C3 = PD 45W+5V/3A

• USB-C1+A1/A2 = PD 45W+5V/3A

• USB-C1+(C2+C3+A1+A2) = PD 45W+(5V/3A total)

• USB-C2+C3+A1+A2 = 5V/3A total

PD 70W: 5V/3A, 9V/3A, 15V/3A, 20V/3.5A, (PPS) 5-21V/3.5A, 70W max

PD 45W: 5V/2.4A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

Total output: 45W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1 = PD 45W

• USB-C2/C3/A1/A2 = 5V/3A

Use multiple ports:

• USB-C1+C2/C3 = PD 20W+5V/3A

• USB-C1+(C2+C3) = PD 20W+(5V/3A total)

• USB-C1+(C2+C3+A) = PD 20W+(5V/3A total)

• USB-C2/C3 + A = 5V/3A total

• USB-C2/C3 = 5V/3A max

• USB-A1/A2 = 5V/3A max

PD 45W: 5V/3A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

PD 20W: 5V/2.4A, 9V/2.22A, 15V/1.33A, 20V/1A, (PPS) 5-11V/2.2A, 20W max

Total output: 20W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1/C2 = PD 20W

• 5V/3A, 9V/2.22A

• (PPS) 5-11V/1.8A, 20W max

• USB-A = 15W (5V/3A)

Use multiple ports:

• Total 5V/3A, USB-C1/C2/A Shared