INSIGNIA NS-TRAVEL70W3C2A (01) PDF Document

The package for the INSIGNIA NS-TRAVEL70W3C2A contains the following items:

• Travel adapter

• Quick Setup Guide

The components vary slightly by model:

45W and 70W Models:

• Buttons

• LED indicator

• Multi-socket

• USA/JP socket

• USA/AU/UK/EU plugs

• USB-A1 port

• USB-A2 port

• USB-C1 port

• USB-C2 port

• USB-C3 port

20W Model:

• USA/AU/UK/EU plugs

• USB-C1 port

• USB-C2 port

• USB-A port

Your INSIGNIA NS-TRAVEL70W3C2A adapter can accept and plug into Type A, B, C, D, E, F, G, H, I, J, L, N, and O outlets and plugs.

Note: Type K and M plugs are not accepted.

Warning: Failure to check the correct voltage could damage your device.

• The adapter is suitable for use with most electronic devices up to 2400W at 240V and 1000W at 100V.

• It can be used with small electric appliances such as laptops, small travel hair dryers, travel irons, electric fans, table lamps, and electric razors.

• It can be used with USB devices such as camera, smartphone, tablet, portable game console, Bluetooth speaker, and power bank.

CAUTIONS:

• Make sure that the configuration button is completely reset when the plugs are retracted and pushed to the bottom. If the button is not reset, the plug has not been deactivated, which will affect use of the device.

• Only one plug configuration can be used at a time by sliding the selected configuration forward. The other plug configurations are automatically locked out.

The built-in multi-country plugs can be selected to fit outlets in many different countries. To select a plug:

1. Locate the button for the country you are in and press and slide the plug configuration out from your travel adapter.

2. Make sure that the contact blades are turned to the parallel position (for USA, Europe, and U.K. only).

3. Press and hold the button to release and continue to pull up, until the plug is completely pulled to the top and then release the button. The button will reset and lock the plug.

Notes:

• Adapter (AC-AC) does not convert voltage.

• Do not use with appliances requiring ground wire.

• Indoor use only.

1. Make sure that your device is compatible and that you have selected the correct plug.

2. Connect your device to the adapter and then plug the adapter into a power outlet.

The LED indicator is located on the front (the side with the USB ports) of your travel adapter. The LED indicates the following:

• LED solid: Normal operation.

• LED does not light: Possible overload. Unplug one device and check the status indicator again.

CAUTION: If your travel adapter is wet, dry it thoroughly before replacing the fuse.

1. Unplug your travel adapter from the wall socket.

2. Using a small coin, turn the fuse holder counter-clockwise to remove the fuse holder from your travel adapter.

3. Remove the burnt out fuse from the fuse holder and discard.

4. Using a small coin, turn the extra fuse holder counter-clockwise to remove the extra fuse from its holder.

5. Place the extra fuse into the fuse holder and reinstall it into your travel adapter.

6. To replace the extra fuse in the future, purchase a new fuse (10A – 250Vac) and reinstall it into the extra fuse position in your travel adapter.

European Union plug: Albania, Algeria, Angola, Argentina, Austria, Azores, Balearic Islands, Bangladesh, Belgium, Bolivia, Bosnia, Brazil, Bulgaria, Burkina Faso, Burundi, Cameroon, Canary Island, Cape Verde, Central African Republic, Channel Islands, Chile, Comoros, Congo, Croatia, Cote d’ Ivoire, Cyprus, Denmark, Djibouti, Egypt, El Salvador, Equatorial Guinea, Eritrea, Faeroe Islands, Finland, France, Gabon, Germany, Gibraltar, Greece, Greenland, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, India, Indonesia, Iran, Iraq, Israel, Italy, Kazakhstan, Korea, Kuwait, Laos, Lebanon, Lithuania, Luxembourg, Macedonia, Madagascar, Madeira, Mali, Martinique, Mauritania, Mauritius, Monaco, Morocco, Mozambique, Myanmar, Nepal, Netherlands, Niger, Norway, Oman, Pakistan, Paraguay, Peru, Philippines, Poland, Portugal, Romania, Russia, Rwanda, Senegal, Somalia, Spain, Sudan, Suriname, Sweden, Switzerland, Syria, Thailand, Togo, Tunisia, Turkey, Uruguay, Vietnam, Zambia.

Australia plug: American Samoa, Argentina, Australia, China, El Salvador, Fiji, Guatemala, Kiribati, Nauru, New Zealand, Panama, Papua New Guinea, St. Vincent, Tajikistan, Tonga, Uruguay.

USA plug: American Samoa, Anguilla, Antilles, Aruba, Bahamas, Bangladesh, Barbados, Bermuda, Bolivia, Brazil, Cambodia, Canada, Cayman Islands, China, Colombia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Japan, Jamaica, Laos, Lebanon, Liberia, Maldives, Mexico, Micronesia, Montserrat, Netherlands, Nicaragua, Niger, Okinawa, Panama, Peru, Philippines, Puerto Rico, St. Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, United States, Venezuela, Vietnam, Virgin Islands (US and British), Yemen.

United Kingdom plug: Bahrain, Bangladesh, Belize, Botswana, Brunei, Cameroon, Channel Islands, Cyprus, Dominica, El Salvador, Gambia, Ghana, Gibraltar, Grenada, Guatemala, Guyana, Hong Kong, Iraq, Ireland, Isle of Man, Jordan, Kuwait, Lebanon, Macau, Malawi, Malaysia, Maldives, Malta, Mauritius, Myanmar, Nigeria, Oman, Qatar, St. Lucia, St. Vincent, Saudi Arabia, Seychelles, Sierra Leone, Singapore, Tanzania, Uganda, United Arab Emirates, United Kingdom, Vietnam, Yemen, Zambia, Zimbabwe.

Total output: 70W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1 = PD 70W

• USB-C2/C3/A1/A2 = 5V/3A

Use multiple ports:

• USB-C1+C2/C3 = PD 45W+5V/3A

• USB-C1+A1/A2 = PD 45W+5V/3A

• USB-C1+(C2+C3+A1+A2) = PD 45W+(5V/3A total)

• USB-C2+C3+A1+A2 = 5V/3A total

PD 70W: 5V/3A, 9V/3A, 15V/3A, 20V/3.5A, (PPS) 5-21V/3.5A, 70W max

PD 45W: 5V/2.4A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

Total output: 45W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1 = PD 45W

• USB-C2/C3/A1/A2 = 5V/3A

Use multiple ports:

• USB-C1+C2/C3 = PD 20W+5V3A

• USB-C1+(C2+C3) = PD 20W+(5V/3A total)

• USB-C1+(C2+C3+A) = PD 20W+(5V/3A total)

• USB-C2/C3 + A = 5V/3A total

• USB-C2/C3 = 5V/3A max

• USB-A1/A2 = 5V/3A max

PD 45W: 5V/3A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

PD 20W: 5V/2.4A, 9V/2.22A, 15V/1.33A, 20V/1A, (PPS) 5-11V/2.2A, 20W max

Total output: 20W max.

Input: 100-240V, 50/60hz

Use one port:

• USB-C1/C2 = PD 20W

• 5V/3A, 9V/2.22A

• (PPS) 5-11V/1.8A, 20W max

• USB-A = 15W (5V/3A)

Use multiple ports:

• Total 5V/3A, USB-C1/C2/A Shared