INSIGNIA NS-TRAVEL20W2C1A-C (01) PDF Document

The package for the INSIGNIA NS-TRAVEL20W2C1A-C contains the following items:

• Travel adapter

• Quick Setup Guide

Warning: Failure to check the correct voltage could damage your device.

The INSIGNIA NS-TRAVEL20W2C1A-C is suitable for use with:

• Most electronic devices up to 2400W at 240V and 1000W at 100V.

• Small electric appliances such as laptops, small travel hair dryers, travel irons, electric fans, table lamps, and electric razors.

• USB devices such as camera, smartphone, tablet, portable game console, Bluetooth speaker, and power bank.

The INSIGNIA NS-TRAVEL20W2C1A-C can accept and plug into Type A, B, C, D, E, F, G, H, I, J, L, N, and O outlets and plugs.

Note: Type K and M plugs are not accepted.

CAUTIONS:

• Make sure that the configuration button is completely reset when the plugs are retracted and pushed to the bottom. If the button is not reset, the plug has not been deactivated, which will affect use of the device.

• Only one plug configuration can be used at a time by sliding the selected configuration forward. The other plug configurations are automatically locked out.

To select a plug:

1. Locate the button for the country you are in and press and slide the plug configuration out from your travel adapter.

2. Make sure that the contact blades are turned to the parallel position (for USA, Europe, and U.K. only).

3. Press and hold the button to release and continue to pull up, until the plug is completely pulled to the top and then release the button. The button will reset and lock the plug.

Notes:

• Adapter (AC-AC) does not convert voltage.

• Do not use with appliances requiring ground wire.

• Indoor use only.

1. Make sure that your device is compatible and that you have selected the correct plug.

2. Connect your device to the adapter and then plug the adapter into a power outlet.

The LED indicator is located on the front (the side with the USB ports) of your travel adapter. The LED indicates the following:

• LED solid: Normal operation.

• LED does not light: Possible overload. Unplug one device and check the status indicator again.

CAUTION: If your travel adapter is wet, dry it thoroughly before replacing the fuse.

1. Unplug your travel adapter from the wall socket.

2. Using a small coin, turn the fuse holder counter-clockwise to remove the fuse holder from your travel adapter.

3. Remove the burnt out fuse from the fuse holder and discard.

4. Using a small coin, turn the extra fuse holder counter-clockwise to remove the extra fuse from its holder.

5. Place the extra fuse into the fuse holder and reinstall it into your travel adapter.

6. To replace the extra fuse, purchase a new fuse (10A – 250Vac) and reinstall it into the extra fuse position in your travel adapter.

70W Model:

• Total output: 70W max.

• Input: 100-240V, 50/60hz

• Use one port: USB-C1 = PD 70W; USB-C2/C3/A1/A2 = 5V/3A

• Use multiple ports: USB-C1+C2/C3 = PD 45W+5V/3A; USB-C1+A1/A2 = PD 45W+5V/3A; USB-C1+(C2+C3+A1+A2) = PD 45W+(5V/3A total); USB-C2+C3+A1+A2 = 5V/3A total

• PD 70W: 5V/3A, 9V/3A, 15V/3A, 20V/3.5A, (PPS) 5-21V/3.5A, 70W max

• PD 45W: 5V/2.4A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

45W Model:

• Total output: 45W max.

• Input: 100-240V, 50/60hz

• Use one port: USB-C1 = PD 45W; USB-C2/C3/A1/A2 = 5V/3A

• Use multiple ports: USB-C1+C2/C3 = PD 20W+5V3A; USB-C1+(C2+C3) = PD 20W+(5V/3A total); USB-C1+(C2+C3+A) = PD 20W+(5V/3A total); USB-C2/C3 + A = 5V/3A total; USB-C2/C3 = 5V/3A max; USB-A1/A2 = 5V/3A max

• PD 45W: 5V/3A, 9V/3A, 15V/3A, 20V/2.25A, (PPS) 5-16V/3A, 45W max

• PD 20W: 5V/2.4A, 9V/2.22A, 15V/1.33A, 20V/1A, (PPS) 5-11V/2.2A, 20W max

20W Model:

• Total output: 20W max.

• Input: 100-240V, 50/60hz

• Use one port: USB-C1/C2 = PD 20W; 5V/3A, 9V/2.22A; (PPS) 5-11V/1.8A, 20W max; USB-A = 15W (5V/3A)

• Use multiple ports: Total 5V/3A, USB-C1/C2/A Shared

The European Union plug is compatible in: Albania, Algeria, Angola, Argentina, Austria, Azores, Balearic Islands, Bangladesh, Belgium, Bolivia, Bosnia, Brazil, Bulgaria, Burkina Faso, Burundi, Cameroon, Canary Island, Cape Verde, Central African Republic, Channel Islands, Chile, Comoros, Congo, Croatia, Cote d’ Ivoire, Cyprus, Denmark, Djibouti, Egypt, El Salvador, Equatorial Guinea, Eritrea, Faeroe Islands, Finland, France, Gabon, Germany, Gibraltar, Greece, Greenland, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, India, Indonesia, Iran, Iraq, Israel, Italy, Kazakhstan, Korea, Kuwait, Laos, Lebanon, Lithuania, Luxembourg, Macedonia, Madagascar, Madeira, Mali, Martinique, Mauritania, Mauritius, Monaco, Morocco, Mozambique, Myanmar, Nepal, Netherlands, Niger, Norway, Oman, Pakistan, Paraguay, Peru, Philippines, Poland, Portugal, Romania, Russia, Rwanda, Senegal, Somalia, Spain, Sudan, Suriname, Sweden, Switzerland, Syria, Thailand, Togo, Tunisia, Turkey, Uruguay, Vietnam, Zambia.

The Australia plug is compatible in: American Samoa, Argentina, Australia, China, El Salvador, Fiji, Guatemala, Kiribati, Nauru, New Zealand, Panama, Papua New Guinea, St. Vincent, Tajikistan, Tonga, Uruguay.

The USA plug is compatible in: American Samoa, Anguilla, Antilles, Aruba, Bahamas, Bangladesh, Barbados, Bermuda, Bolivia, Brazil, Cambodia, Canada, Cayman Islands, China, Colombia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Japan, Jamaica, Laos, Lebanon, Liberia, Maldives, Mexico, Micronesia, Montserrat, Netherlands, Nicaragua, Niger, Okinawa, Panama, Peru, Philippines, Puerto Rico, St. Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, United States, Venezuela, Vietnam, Virgin Islands (US and British), Yemen.

The United Kingdom plug is compatible in: Bahrain, Bangladesh, Belize, Botswana, Brunei, Cameroon, Channel Islands, Cyprus, Dominica, El Salvador, Gambia, Ghana, Gibraltar, Grenada, Guatemala, Guyana, Hong Kong, Iraq, Ireland, Isle of Man, Jordan, Kuwait, Lebanon, Macau, Malawi, Malaysia, Maldives, Malta, Mauritius, Myanmar, Nigeria, Oman, Qatar, St. Lucia, St. Vincent, Saudi Arabia, Seychelles, Sierra Leone, Singapore, Tanzania, Uganda, United Arab Emirates, United Kingdom, Vietnam, Yemen, Zambia, Zimbabwe.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.