Free English INNOKIN KROMA-R ZLIDE (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD INNOKIN KROMA-R ZLIDE (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the charging and safety guidelines for the INNOKIN KROMA-R ZLIDE?
Use only high quality 18650 batteries. Check Mooch for detailed / real battery specifications.
Use a quality external charger. Do not leave batteries charging unattended.
Always store 18650 batteries safely in plastic or silicone protective sleeves.
Do not leave device charging unattended.
Always check coils for recommended wattage range.
How do I perform the quick setup for the INNOKIN KROMA-R ZLIDE?
Attach the Zlide Tank (1.2ohm Coils).
Fill the tank and wait 5 mins to prime.
Adjust tank airflow to preference.
Power on Device (3x).
Select Wattage Mode.
Set Wattage to 10W.
Vape then increase wattage to preferred heat and taste.
What are the steps for the first-time use of the INNOKIN KROMA-R ZLIDE?
1. REMOVE THE PRE-INSTALLED COIL.
2. PRIME THE COIL.
3. MOUNT THE COIL (Reverse direction of step 1.)
4. FILL THE TANK (Remove the mouthpiece. push the direction of the arrow and slide to open the top cap.)
5. ADJUST THE AIR FLOW (Adjust the airflow to a comfortable draw and enjoy your vape!)
How do I prime the coil on the INNOKIN KROMA-R ZLIDE?
When using any coil for the first time, drip 3-4 drops of e-liquid into the coil to saturate the cotton within.
What important maintenance tips should be followed for the INNOKIN KROMA-R ZLIDE?
Keep contact clean of debris/eliquid.
Keep tank at least 1/3 full for best longevity and flavors.
Do not vape if tank is empty.
If there is a burnt taste, replace coil.
Replace coil when there is a reduction in flavour or vapor.
How do I access the main menu on the INNOKIN KROMA-R ZLIDE and what options are available?
To access the menu, hold the + and – buttons simultaneously. The following options are available:
MENU: Main Menu Header.
WATTAGE: Select Wattage Mode.
WATT MODE: Select (Soft) / (Normal) / (Hard).
VOLTAGE: Select Voltage Mode.
VOLT MODE: Select (Soft) / (Normal) / (Hard).
CURVE: Set Custom Wattage over time.
BYPASS: Vape Max Battery Output.
CUTOFF: Vape time cutoff (3s to 18s).
SCREEN: Screen time cutoff (5s – 180s).
BACK: Return to Op Screen.
How do I power the INNOKIN KROMA-R ZLIDE on or off?
Click the [POWER] button 3 times.
How do I access the secondary screen on the INNOKIN KROMA-R ZLIDE?
Hold the + button and the Power button simultaneously to access the secondary screen. This screen displays:
Battery Charge
V. – Battery Volts
Coil Resistance
Total Puffs
[Clear Puffs] [Back] options
How do I lock or unlock the wattage on the INNOKIN KROMA-R ZLIDE?
Hold the – button and the Power button simultaneously to lock or unlock the wattage.
What are the parts and features of the INNOKIN KROMA-R ZLIDE?
Mouthpiece
Top Fill [Push to Open]
Z-Coils
2ml Capacity
Air Flow
510 Connection
Power (3x On/Off) Select Button
Screen (Displays Battery Capacity, Wattage Lock, Wattage/Voltage, Mode, Puff Timer, Coil Resistance, Puff Count, Voltage Output)
+ Button
– Button
MicroUSB Port
Battery Door
CLICK HERE TO DOWNLOAD INNOKIN KROMA-R ZLIDE (01) PDF DOCUMENT