FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF USER GUIDE
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF USER MANUAL
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF OWNER GUIDE
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF OWNER MANUAL
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF REFERENCE GUIDE
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF REFERENCE MANUAL
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH INNOKIN COOLFIRE Z50 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD INNOKIN COOLFIRE Z50 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
INNOKIN COOLFIRE Z50 (01) PDF SUMMARY:
How do I turn the Innokin CoolFire Z50 on or off?
You can turn the device on or off by clicking the fire button 3 times.
What does the OLED display show?
The OLED display shows the battery life, the set wattage or voltage, and the coil resistance.
How do I fill the tank?
For the child-proof Zlide tank, you must first remove the mouthpiece. Then, push in the direction of the arrow and slide the top cap to open it for filling.
How do I install a new coil?
First, remove the pre-installed coil, prime the new coil, and then mount the coil.
How do I adjust the airflow?
Adjust the airflow to a comfortable draw.
How do I select the mode?
Press and hold the fire button and the up button to select wattage mode, or press and hold the fire button and the down button to select voltage mode.
How do I adjust the wattage or voltage?
Push and hold the up or down buttons to adjust the wattage or voltage.
What should I do after adjusting settings?
Check the coil or coil packaging for the recommended wattage range.
What does the quick reference guide suggest holding the fire button and the up button for?
Holding the fire button and the up button will adjust the wattage or voltage up.
What does the quick reference guide suggest holding the fire button and the down button for?
Holding the fire button and the down button will adjust the wattage or voltage down.
What does pressing the up and down buttons do?
Pressing the up and down buttons will display the coil resistance, voltage out, and puff count.
What does holding the up and down buttons do?
Holding the up and down buttons will flip the display or orientation.
What are some important things to remember when using the device?
You must be of legal smoking age to vape. If you do not smoke, do not vape. Do not leave the Z50 charging unattended. Use a certified wall charger and the included cable for charging. Power off the device when storing or placing in a pocket, bag, or purse. Remember to prime the coil. Check the coil for the recommended wattage range, and start lower, increasing to taste.
What should I do if the coil tastes burned?
If a coil tastes burned, replace it immediately and dispose of the used coil safely.
How often should I change my coils?
Change the coils regularly.
CLICK HERE TO DOWNLOAD INNOKIN COOLFIRE Z50 (01) PDF MANUAL
How do change the battery in coolfire z50
Check this “Z50 Disassembly” page: https://www.reddit.com/r/Innokin/comments/kmab32/z50_disassembly/