ICY BOX IB-184M2 (01) PDF MANUAL

The key features of the IB-184M2 include:

External enclosure for M.2 SATA SSD

USB 3.1 Gen 2 up to 10 Gbit/s

For M.2 SSD with B-Key or B+M-Key, 22 x 30/42/60/80 mm

Connector to PC: Type-A USB connector integrated (cableless)

Plug & Play, Hot Swap

Toolless SSD installation

Supports Windows, Mac 10.7.4 or later version

To install an SSD:

1. Slide out the internal PCB from the enclosure.

2. Insert the M.2 SATA SSD into the designated slot on the PCB.

3. Secure the M.2 SSD using the provided fastening mechanism.

4. Carefully slide the assembled PCB back into the external enclosure until it is fully seated.

The external SSD can be connected to or disconnected from the computer via USB cable without shutting down the computer. Please await the end of read/write operations before disconnecting the SSD to avoid data loss.

A new SSD must first be initialized, partitioned and formatted by the operation system to be displayed by the system.

If the hard disc isn’t recognized instantly by the operating system please check:

– if the driver software is installed (USB),

– if the SSD is initialized, partitioned and formatted.

To prevent electrical shock:

Read the operating instructions prior to use.

Make sure the device has been de-energised prior to working on it.

Do not remove contact protection panels.

Avoid contact with conducting parts.

Do not bring plug contacts in contact with pointed and metal objects.

Use in intended environments only.

Operate the device using a power unit meeting the specifications of the type plate only!

Keep the device/power unit away from humidity, liquid, vapour and dust.

Do not modify the device.

Do not connect the device during thunderstorms.

Approach specialist retailers if you require repairs.

To prevent potential injuries during assembly:

Read the operating instructions prior to assembly.

Avoid coming into contact with sharp edges or pointed components.

Do not force components together.

Use suitable tools.

Use potentially enclosed accessories and tools only.

To prevent overheating and failure of the device/power unit:

Prevent externally heating up components and ensure an exchange of air.

Do not cover the fan outlet and passive cooling elements.

Avoid direct sunlight on the device/power unit.

Guarantee sufficient ambient air for the device/power unit.

Do not place objects on the device/power unit.

To prevent risks from small parts and packaging:

Keep small parts and accessories away from children.

Store/dispose of plastic bags and packaging in an area that is inaccessible to children.

Do not hand over small parts and packaging to children.

To prevent potential data loss:

Always comply with the information in the operating instructions/quick installation guide.

Exclusively use the product once the specifications have been met.

Back up data prior to commissioning.

Back up data prior to connecting new hardware.

Use accessories enclosed with the product.

To clean the device:

Disconnect the device prior to cleaning.

Aggressive or intense cleaning agents and solvents are unsuitable.

Make sure there is no residual moisture after cleaning.

We recommend cleaning devices using a dry, anti-static cloth.

The icon on the product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE), this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.