HELIX COMPOSE CIX E50-S4 (01) PDF Document

The technical data for the HELIX COMPOSE CIX E50-S4 are as follows:

Frequency response: 110 Hz – 15,000 Hz

Impedance: 4 Ω

Ambient temperature range: -40 °C to +105 °C

Air humidity: Max. 93%

Total weight: 118 g

The scope of delivery for the HELIX COMPOSE CIX E50-S4 includes the following items:

1 x CiX E50-S4

1 x Connection cable

1 x Mounting material

1 x Adhesive pad

The dimensions for the HELIX COMPOSE CIX E50-S4 speaker are:

Overall Diameter: ø52.1 mm / 2.05″

Mounting Hole Diameter: ø3.2 mm / 0.13″

Mounting Hole Spacing (center-to-center): 38.2 mm / 1.50″

Overall Width (including terminals): 66.8 mm / 2.63″

Depth: 18.5 mm / 0.73″

To mount and wire the HELIX COMPOSE CIX E50-S4 speaker, follow these guidelines:

Surface Preparation: Ensure the mounting surface is smooth, dust-free, and grease-free.

Mounting: An optional adhesive pad is included for mounting.

Wiring: Connect the wires according to their polarity. The positive lead is red (+) and the negative lead is black (-).

To prevent damage and possible injury, read the manual carefully and follow all installation instructions. If performing your own installation, follow these precautions:

• Always make sure that the speaker will fit into the intended mounting location and that there is adequate depth for the magnet system.

• Take care that the mounting surface is smooth, dry, clean and grease-free.

• Ensure that the loudspeaker is correctly connected in polarity. The positive lead of the loudspeaker is marked red.

• Make sure that all speaker wiring is fully protected from cutting or wear at sharp edges, which can lead to short circuits that may damage your head unit, amplifier and / or speaker system.

• Make sure that all components are mounted properly.

• Do not mount the speaker where water may splash on them.

• The quality of the installation has a significant effect on the overall performance of the speaker.

The regulatory markings on the HELIX COMPOSE CIX E50-S4 indicate its certification for use in vehicles in different regions:

CE: This product has been issued a CE marking. This means that the device is certified for use in vehicles within the European Union (EU).

UKCA: This product has been issued a UKCA marking. This means that the device is certified for use in vehicles within the United Kingdom.

EAC: This product has been issued an EAC marking. This means that the device is certified for use in vehicles within the Eurasian Customs Union.

The HELIX COMPOSE CIX E50-S4 speaker must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product with normal household waste. Correct disposal of old products helps prevent negative consequences for the environment and human health.