FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF USER GUIDE
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF USER MANUAL
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF OWNER GUIDE
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF OWNER MANUAL
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF REFERENCE GUIDE
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF INSTRUCTION GUIDE
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF REFERENCE MANUAL
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF INSTRUCTION MANUAL
FREE ENGLISH GATEWAY FAX SYSTEMS 910 (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD GATEWAY FAX SYSTEMS 910 (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to install the GFS 910?
1.Install The STICK as shown in the diagram above.
2.Insure that your 90si is set for operation in the 2-Line, Dual-Mode-On configuration: Switch 6 set for 2-Line and Switch 7 set for Dual-Mode ON.
3.Apply power to the 90si, 910, Secure Telephone and Fax.
How to send a secure fax?
1.With fax idle, call from your STU-III.
2.Establish Secure-Data mode.
3.Begin Transmission (See 90si User’s Guide Section 3.3)
How to receive a secure fax?
1.Answer ringing STU-III.
2.Establish Secure-Data mode.
3.Stand-by, the Secure Fax will be received automatically.
How to send a non-secure fax?
1.With the STU-III idle.
2.Load document on your fax.
3.Dial remote (Non-Secure) fax number on your fax.
4.Press the START button on your fax.
How to receive a non-secure fax?
1.No action required, receptions are automatic.
CLICK HERE TO DOWNLOAD GATEWAY FAX SYSTEMS 910 (02) PDF MANUAL