FAQ LED PANEL (01) PDF Document

The FAQ LED PANEL packaging includes:

• FAQ™ LED Panel

• Protective glasses

• Glasses pouch

• Cleaning cloth

• Device Stand (2 pieces)

• Power Cable with 4 Plug Adaptors

• Stand Assembly Instruction Card

• Manual & Quick Start Guide

LED PANEL

Light Emitting Diodes (LEDs) produce bright, concentrated light via specially designed diamond-shaped lenses that focus the beams through multiple facets for optimal treatment.

UNIVERSAL POWER BUTTON

Turns device on and off, switches between LED colors, and puts device in Bluetooth pairing mode to connect to the app.

SMART SWISS DESIGN

Ultra-sleek & lightweight, with luxurious matte gold finish. Designed to fit as easily as an iPad in your handbag.

POWER PORT

Power cable is detachable for easy storage.

Before using your device for the first time, you must unlock it. You can do this automatically by registering your device via the FAQ™ Swiss app for the first time. Simply follow the steps below:

1. Download the FAQ™ Swiss app on your mobile phone.

2. Log in to your existing account, or sign up for a new one.

3. Add device (on the top of your screen).

4. Choose the device series.

5. Follow the instructions on the app and fill in the purchase information.

And your device is ready to use!

1. PREP

Plug in your LED panel. You can choose to place it on the stand or hold it in your hands. Then put on the protective eyewear. (TIP: To optimize your treatment even further, apply FAQ™ Red Light Peptide Serum onto the areas you wish to treat, and gently massage until fully absorbed.)

2. SELECT INTENSITY

Press the universal power button to turn on the LED Panel. Then press the button again to switch between LED colors. Access more settings and pre-set treatments via the FAQ™ Swiss app.

3. REJUVENATE

Sit back, and enjoy the numerous wellness benefits of LED light therapy for up to 15 mins. Once finished, press and hold the universal power button to turn your device off.

The recommended usage for the FAQ LED PANEL is 5-15 minutes, 3-5 times per week.

For optimum safety:

• Treatments with FAQ™ LED Panels should be comfortable. If you experience any discomfort, prolonged skin redness, or temporary changes in skin color (lightening or darkening), discontinue use immediately and consult a physician.

• Do not use the device if you have a known sensitivity to sunlight (photosensitivity) or are taking medication that makes the skin more sensitive and causes photosensitivity, e.g., Retin A, Accutane and/ or other topical retinoids. Always check the instruction leaflet that comes with your medicinal product, to see if photosensitivity is listed as a side effect, and seek medical advice prior to use of the device as use may harm the skin.

• This device is not intended for the treatment of medical conditions.

• Consult your doctor or dermatologist before using the device over any suspicious or cancerous lesions.

• Do not use the device if you have sun burnt or inflamed skin, or have any other form of injured or damaged skin, such as chapped skin and open trauma, wound ulceration, post-operative wounds, skin diseases, skin allergies (such as severe acne or skin infections etc.).

• Do not use the device if you have any skin condition in the treatment area, including psoriasis, vitiligo, eczema, herpes simplex or active infections or wounds.

• Do not use the device if you have any existing medical conditions such as epilepsy, a hemorrhagic disease, cancer, tumors, or perceptual disturbance.

• If you have recently had a laser treatment, chemical peel, fillers, botox, or cosmetic surgery, wait at least 30 days and consult your physician before use.

• If you have a skin condition or any medical concerns, consult your physician before use.

• Do not stare directly at the LED panel or LED lights when the device is switched on.

• There may be a perception of flashing lights during the use of your device, resulting from the stimulation of your optic nerve. If you notice this condition constantly without the use of your device, consult your physician.

• Do not exceed the usage specified in the treatment regime. Damage of the skin may occur after prolonged or repeated application on one site.

• Children or persons with reduced physical, sensory or mental capabilities should not use, play with, maintain or clean the device.

• Avoid leaving the device in direct sunlight and never expose it to extreme heat or boiling water.

• Discontinue use if the device or power cable is not working properly or appears damaged in any way. Use the power cable supplied with your device only.

• Do not use the device if it is overheating or you suspect that it is malfunctioning.

• Before using, make sure that the plug and socket are completely dry. Failure to do so may result in electric shock, short circuit, or fire.

• Do not tamper or attempt to disassemble the product as this may cause damage to the unit.

• Do not use while driving or operating heavy machinery.

• Do not insert any object into any opening of the device.

• The device contains no serviceable parts.

• Use this device only for its intended use as described in this manual. Any harmful consequences resulting from misuse, connection to improper voltage sources, or any other improper applications are not the responsibility of FAQ™ Swiss.

After treatment, always switch off the device. Then unplug the power supply from the device and the electrical outlet. Use a damp, lint-free cloth or towel to thoroughly wipe the device surface.

NOTE: This product is not 100% waterproof, so do not wash it under running water. Be careful to avoid getting water in any openings in the device. Never use cleaning products containing alcohol, petrol or acetone.

If your FAQ LED PANEL cannot be switched on or off and/or the universal button does not respond:

• Make sure the power supply is plugged in.

• Unplug the device, then plug it back in.

• The microprocessor is temporarily malfunctioning. Press and hold the universal button to restart the device.

If your FAQ LED PANEL won’t sync to the FAQ™ Swiss app:

• Switch your Bluetooth off and then on again to try reconnecting.

• Close the FAQ™ Swiss app and then reopen it to start the process over.

• Check to see if the app needs to be updated in your mobile device’s app store.

MATERIALS: Silicone, PC plastic, Aluminium

SIZE: H260.6 x W205 x D8.5 mm

WEIGHT: 472 g

MAX NOISE LEVEL: <60 dB

To view additional legal and regulatory information on the app, simply follow the steps below:

Step 1: Open the FAQ™ Swiss app & select the profile icon.

Step 2: Select ‘Legal & Regulatory’.

Step 3: Select your device.