FAQ 501 (01) PDF Document

The FAQ 501 packaging includes the following items:

• FAQ™ 501 device

• Protective glasses

• Glasses pouch

• Cleaning cloth

• USB charging cable

• Manual & Quick Start Guide

The FAQ 501 device includes the following features:

PULSED LIGHT (590 – 1200 nm): Reaches multiple layers (epidermis and mid-to-deep dermis), to help improve the look of texture & blemishes on the skin.

RED (650 nm) LED LIGHT: Helps reduce the appearance of fine line, wrinkles & pigmentation.

SILICONE SHIELD: Designed to shield your eyes from the bright pulsed light, and keep skin at a distance from the treatment window and skin cooling ducts.

PLUS & MINUS BUTTONS: Adjust the intensity of pulsed light to perfectly suit your skin’s needs.

SMART SWISS DESIGN: USB rechargeable, lightweight & ergonomically shaped, with guided treatments on the FAQ™ Swiss app.

COOLING DUCTS: Gently cool skin and device for optimal comfort and maximum efficiency.

UNIVERSAL POWER BUTTON: Turns the device on and off, and puts the device in Bluetooth pairing mode.

FLASH BUTTON: Activates pulsed light. Press once for stamp mode, or press continuously for glide mode.

INTENSITY INDICATOR LIGHTS: Light up to indicate the intensity level of your device. Flash to indicate when the device is in Bluetooth pairing mode, Smart Control mode and when the device needs to be charged.

CHARGING PORT: Up to 35 uses per full charge, with the provided USB charging cable.

Before using your FAQ 501 for the first time, you must unlock it. You can do this automatically by registering your device via the FAQ™ Swiss app for the first time. Simply follow the steps below:

1. Download the FAQ™ Swiss app on your mobile phone.

2. Log in to your existing account, or sign up for a new one.

3. Add device (on the top of your screen).

4. Choose the device series.

5. Follow the instructions on the app and fill in the purchase information.

Your device will then be ready to use.

Before your first treatment, it is recommended you test your skin for a reaction to the device. The patch test area should be on your arm, and approximately 3cm x 1cm in size (equivalent to 1 flash from FAQ™ 501). Perform the patch test by lightly placing the silicone shield to your skin, then press and immediately release the flash button. Wait 24 hours following the patch test to ensure your skin is suitable for treatment and there is no adverse reaction to the light energy. If there is no reaction after 24 hours, you may continue using the device as specified in the How To Use section. If a skin reaction develops, discontinue using the device and consult your physician.

1. PREP

Before starting your treatment, skin should be clean and dry, and you should put on the protective glasses. (TIP: To optimize your treatment even further, apply FAQ™ Red Light Peptide Serum onto the areas you wish to treat, and gently massage until fully absorbed.)

2. SELECT INTENSITY

Press the power button to turn on your FAQ™ 501 device. Adjust the intensity by pressing the + and – buttons. (You can access AI-guided treatment videos and more settings via the FAQ™ Swiss app.)

3. REJUVENATE

Lightly place the silicone shield to your skin. For large areas, press and hold the flash button while gliding on skin. For small areas, press and immediately release the flash button. Once your treatment is complete, press and hold the power button for 3 seconds to turn off your device. Then continue with your regular skincare routine.

The recommended usage for the FAQ 501 is 2-3 times per week.

• This device emits intense pulses of light. For your comfort and safety, put on the protective eyewear before your treatment.

• The silicone shield on your device must be in full contact with your skin for the pulsed light to work effectively. However, do not press the device too hard to skin – the treatment window should NOT be in contact with the skin.

• FAQ™ 500 devices are effective enough that you only need to glide the device once over each area, per treatment. For larger areas, press and hold the flash button while gliding the device slowly and continuously. For smaller areas, press and instantly release the flash button, before moving to the next area.

• Your device has 2 modes: Manual mode (default setting), and Auto mode (selectable under ‘Settings’ on the app). In Manual mode, the flash will only activate when the flash button remains pressed, and the silicone shield is in full contact with the skin – for ultimate control. In Auto mode, once the flash button is pressed, the flash will remain active as long as the silicone shield is in contact with skin – for ultimate comfort. If the device loses contact with the skin for more than 5 seconds in Auto mode, the flash button will need to be pressed again to activate the flash.

• The device has 5 intensity levels. Use intensity levels 1 – 3 for sensitive areas of the face and neck.

• Do not use this device over tattoos, open wounds, or dark, raised or irregular moles.

• Aftercare: Apply a gentle, hydrating moisturizer after each treatment. Avoid harsh exfoliants, retinoids, or direct sun exposure for at least 48 hours post-treatment and use broad-spectrum SPF 30+ daily, as your skin will be more sensitive to UV exposure.

For optimum safety, follow these precautions:

EYE SAFETY

FAQ™ 501 emits flashes of intense pulsed light. Direct exposure is potentially harmful to your eyes. Take care to follow the safety precautions below.

CAUTION: Possible eye injury (potentially leading to loss of vision) or skin injury if instructions are not followed. Read and follow the instructions.

GENERAL WARNINGS

• Treatments with FAQ™ 501 should be comfortable. If you experience any discomfort, prolonged skin redness, or temporary changes in skin color (lightening or darkening), discontinue use immediately and consult a physician.

• Do not use the device if you have a known sensitivity to sunlight (photosensitivity) or are taking medication that makes the skin more sensitive and causes photosensitivity, e.g., Retin A, Accutane and/or other topical retinoids. Always check the instruction leaflet that comes with your medicinal product, to see if photosensitivity is listed as a side effect. Use of the device on photosensitive skin could result in skin damage such as swelling or blisters. Seek medical advice prior to use of the device as use may harm the skin.

• This device is not intended for the treatment of medical conditions.

• Do not use the device on wound ulceration, trauma, and post-operative wounds.

• Do not use the device if you have light-sensitivity or sun burnt or inflamed skin, or have any other form of injured or damaged skin.

• Do not use the device over red skin, raised moles, major arteries (e.g. carotid), enlarged capillaries, metal implants, infected areas, or areas with no feeling in them.

• Do not use the device to treat rosacea, moles, warts, open sores, cancerous lesions, or any skin condition.

• Do not use the device if you have any skin condition in the treatment area, including psoriasis, vitiligo, eczema, acne, herpes simplex or active infections or wounds.

• Do not use the device if you have any existing medical conditions such as epilepsy, a hemorrhagic disease, cancer, tumors, or perceptual disturbance.

• Do not use the device on areas where you have tattoos or permanent make up.

• If you have recently had a laser treatment or chemical peel, wait at least 30 days, and consult your physician before use.

• If you have fillers or botox, or if you have recently had cosmetic surgery on your face, consult your physician before use.

• Treating tanned skin with this device, may result in permanent hyperpigmentation (darkening) or hypopigmentation (lightening) of the treated skin.

• If you have a skin condition or any medical concerns, consult your physician before use.

• The safety of the device for use during pregnancy has not been established. If you are pregnant, consult your physician before using this device.

• Do not look directly into the treatment window of the device when it is switched on.

• Do not attempt to activate (flash) the device towards the eye, or on any surface other than skin.

• Do not use the device over the eyelids or close to the eye, including over the eyebrows or eyelashes. Misuse can lead to eye damage. ONLY attempt to activate (flash) the device when the treatment window is in full contact with the area you wish to treat.

• Do not stare directly at the LED light.

• There may be a perception of flashing lights during the use of your device, resulting from the stimulation of your optic nerve. If you notice this condition constantly without the use of your device, consult your physician.

• Do not exceed the usage specified in the treatment regime. Damage of the skin may occur after prolonged or repeated application on one site. Avoid over-usage which includes excessive passes, stacking of flashes and/or increased frequency of use.

• The device should be kept out of the reach of children under 18 years of age. Children or persons with reduced physical, sensory or mental capabilities should not use, play with, maintain or clean the device.

• For reasons of hygiene, we do not recommend sharing your device with anyone else.

• Do not use the device while driving or operating heavy machinery.

• Do not use the device when it is plugged in.

• Do not insert any object into any opening of the device.

• Do not use the device if it is overheating or you suspect that it is malfunctioning.

• Avoid leaving your device in direct sunlight and never expose it to extreme heat or boiling water.

• This device should only be used with a SELV power adapter, and it is recommended that IEC60950 standard power suppliers are used to charge the device.

• This device should be completely dry before use. Do not use the device if it has been submerged in water, and do not use with wet hands.

• Ensure that the treatment window is clean and free from debris. Any debris on or around the treatment window during operation may result in temporary skin changes such as redness or swelling.

• Do not use near bathtubs, showers, basins or other vessels containing water. If the device becomes wet, it should not be used.

• Do not use the device if it becomes uncomfortably hot to touch. This may indicate that the unit is damaged.

• The device’s treatment window is a critical component that will get hot during use. Do not touch the treatment window during or directly after use. Regularly inspect the treatment window for damage.

• Before charging, make sure that the plug and socket are completely dry. Failure to do so may result in electric shock, short circuit, or fire.

• Do not use the device while charging. Discontinue use if this device or charger is not working properly or appears damaged in any way. Use the USB charging cable supplied with your device only.

• The battery must be removed from the appliance before it is disposed of. The appliance must be disconnected from the supply mains when removing the battery, and the battery is to be disposed of safely.

• This product contains no serviceable parts.

Always clean FAQ™ 501 thoroughly after use. The treatment window should be thoroughly wiped with a slightly damp, lint free cloth. It is particularly important to keep the front of the device and reflector free from dirt and other debris, to ensure maximum performance. For optimal hygiene, we recommend spraying the silicone surface of the device with FAQ™ Silicone Cleaning Spray once a week, and rinsing with warm water.

CAUTION: The treatment window can get hot during use. DO NOT touch or clean the treatment window for at least 5 minutes after use to allow it to cool down.

NOTE:

• Never use cleaning products containing alcohol, petrol or acetone, as they may irritate the skin and damage the silicone.

• This device is NOT 100% waterproof. Be careful to avoid getting water in any openings in the device, including the cooling ducts.

If the FAQ 501 is not activated, the battery is likely empty. Recharge using the USB charging cable for up to 2 hours until fully charged and then restart your device by holding down the universal button.

The microprocessor may be temporarily malfunctioning. Press and hold the universal button to restart the device.

If your FAQ 501 won’t sync to the FAQ™ Swiss app, try the following steps:

• Switch your Bluetooth off and then on again to try reconnecting.

• Close the FAQ™ Swiss app and then reopen it to start the process over.

• Check to see if the app needs to be updated in your mobile device’s app store.

NOTE: This process is not reversible. Opening the device will void its warranty. This action must only be undertaken when the device is ready to be disposed of.

Because this device contains a lithium-ion battery, the battery must be removed before disposal and should not be thrown away with household waste. In order to do this, remove the silicone outer layer, open the inner plastic shell, remove the battery, and dispose of it in accordance with your local environmental regulations. Wear gloves during this process for your safety.

MATERIALS: Body-safe silicone, PC + ABS plastic, Glass

SIZE: H189 x W46 x D61 mm

WEIGHT: 245 g

BATTERY: Li-ion 750mAh 11.1V

USES PER CHARGE: Up to 35 uses per 2 hour charge

STANDBY: 90 days

MAX NOISE LEVEL: <60 dB