EPSON POWERLITE L610 (01) PDF Document

You can connect various cables to the corresponding ports on your EPSON POWERLITE L610 projector. These include:

• Ethernet cable to the LAN port.

• HDMI cable to the HDMI 1 or HDMI 2 ports.

• VGA cable to the Computer1 or Computer2 ports.

• VGA-to-component cable to the Computer1 or Computer2 ports.

• Stereo mini jack cable to the Audio1, Audio2, or Audio Out ports.

• USB cable for a USB device to the USB-A port.

• A wireless LAN module to the USB-A port.

Note: HDBaseT™ is available for the PowerLite L510U/L610U/L610W/L615U only. The wireless LAN module accessory is available for the PowerLite L400U/L500W/L510U/L610/L610W only.

1. Turn on your computer or image source.

2. Press the power button on the projector or remote control. After the status light stays blue, the projector is ready.

Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected.

3. If your image does not appear, see the sections on switching image sources or troubleshooting.

Press the power button on the projector or remote control. If you see a confirmation message, press the power button again.

Note: If the Direct Power On function is enabled, you can flip the switch controlling the outlet to which the projector is connected instead. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.

To switch between image sources on your EPSON POWERLITE L610, press the Source Search button or one of the source buttons (Computer, HDMI/Video, USB, LAN) on the remote control, or the Source Search button on the projector.

The default language is English. To change it on your EPSON POWERLITE L610:

1. Press the Menu button to access the projector’s menu system.

2. Select Extended > Language.

3. Select your language.

4. When you’re done, press the Menu button to exit.

1. Press the down arrow/test pattern button on the projector.

2. Press the Enter button to change the test pattern.

3. When you’re done, press the Esc button to clear the test pattern.

Set the Screen Type setting to the screen’s aspect ratio.

1. Press the Menu button.

2. Select Extended > Display > Screen > Screen Type.

3. Select the screen’s aspect ratio. The displayed image should match the screen’s size and shape.

4. When you’re done, press the Menu button to exit.

Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.

Note: Lens shift is not available on the PowerLite L400U/L500W.

1. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image.

2. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.

• Focusing: Turn the focus ring to sharpen the image.

• Zooming: Turn the zoom ring to reduce/enlarge the image.

If your image is uneven on the sides, you can use the projector’s distortion correction features, such as H/V-Keystone, Quick Corner®, and Arc Correction, to adjust the shape.

• Make sure the status light on the projector is blue and not flashing.

• Make sure the cables are connected correctly.

• You may need to change the image source. Also make sure the source device is turned on.

Windows®

Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as a screen symbol. You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. You may need to press the keys again to display the image on both devices.

On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

Mac

Open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.