EVOLUTION R210SMS (02) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD EVOLUTION R210SMS (02) PDF MANUAL


PDF Content Summary: FITTING R210SMS / R255SMS TO MITRE SAW STAND • Fit your Saw Mounting Brackets to the stand but do not lock down. • Mount your mitre saw on to the brackets, adjust brackets to line up with the fixing holes on the base of your machine. (Fig 1a) Also, locate it more to the rear of the brackets. (Fig 1b) • Using the M6 x 40 coach bolts, large washer, spring washer and Hex Nut. NOTE: Do not remove the rubber feet or use the wing nuts. Insert the coach bolt from the underside (Fig. 2a) of the bracket and through the base (Fig. 2b) of the machine. Then put the large flat washer on to the bolt followed with the spring washer and the hex nut (Fig. 2c). Leave these loose until all bolts are fitted and the machine is correctly aligned. • Lock down the mounting brackets, slide the machine to the rear of the bracket (Fig. 2d), then fully tighten the nuts. evolutionpowertools.com Fig. 1a Fig.1b

Fig. 2a Fig. 2c Fig. 2b

Fig. 2d


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply