EPSON POWERLITE L615U (01) PDF Document

1. Turn on your computer or image source.

2. Press the power button on the projector or remote control. After the status light stays blue, the projector is ready.

Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected.

3. If your image does not appear, see instructions for “Switching Between Image Sources” or troubleshooting steps.

The default language of the projector’s menu system is English, but you can change it as necessary.

1. Press the Menu button to access the projector’s menu system.

2. Select Extended > Language.

3. Select your language.

4. When you’re done, press the Menu button to exit.

Press the Source Search button or one of the source buttons (on the remote control), or the Source Search button (on the projector).

1. Press the down arrow/test pattern button on the projector.

2. Press the Enter button to change the test pattern.

3. When you’re done, press the Esc button to clear the test pattern.

Set the Screen Type setting to the screen’s aspect ratio.

1. Press the Menu button.

2. Select Extended > Display > Screen > Screen Type.

3. Select the screen’s aspect ratio.

Note: The displayed image should match the screen’s size and shape.

4. When you’re done, press the Menu button to exit.

Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.

1. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image.

2. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.

Note: Lens shift is not available on the PowerLite L400U/L500W models.

To focus the image, turn the focus ring to sharpen the image.

To zoom, turn the zoom ring to reduce/enlarge the image.

If your image is uneven on the sides, you can use the projector’s distortion correction features, such as H/V-Keystone, Quick Corner®, and Arc Correction, to adjust the shape.

Press the power button on the projector or remote control. If you see a confirmation message, press the power button again.

Note: If the Direct Power On function is enabled, you can flip the switch controlling the outlet to which the projector is connected instead.

With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.

If you see a blank screen or the message “No signal”:

• Make sure the status light on the projector is blue and not flashing.

• Make sure the cables are connected correctly.

• You may need to change the image source. Also make sure the source device is turned on.

On a Windows computer:

Press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as a screen symbol. You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. You may need to press the keys again to display the image on both devices.

On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

On a Mac computer:

Open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

• Power button: Turn the projector on or off.

• Source Search / Computer / HDMI/Video / USB / LAN: Select an image source.

• Link Menu: Display settings for a device in the HDMI port.

• Auto: Automatically adjust the computer image.

• Aspect: Change the aspect ratio.

• Color Mode: Select color modes.

• Num / ID: Hold down and use numeric buttons to enter numbers or select which projector to control.

• Menu: Open projector menus.

• Esc: Cancel current operation or return to a previous menu.

• Arrow buttons / User / Pointer: Navigate through menu settings or move the pointer.

• Page buttons: Move to the next or previous image when projecting from a computer over the network.

• E-Zoom: Zoom in or out on part of an image.

• Volume: Control volume.

• A/V Mute: Temporarily turn off display and audio.

• Split: Split the screen between two inputs.

• Freeze: Freeze the image.

• Home: Display the Home screen.

You can purchase replacement parts from an Epson authorized reseller.