EPSON 660 (01) PDF MANUAL

EPSON 660 (01) PDF SUMMARY:

What should I do before using the projector?

Before using the projector, make sure you read the safety instructions in the online User’s Guide.

---

How do I connect the projector to a video device?

Connect multiple video devices and use the Source Search button on the projector or the remote control to switch between them.

---

What types of cables can I use to connect a video device to the Home Cinema 660/760HD projector?

You can use a component video to VGA cable, an HDMI cable, or an RCA video cable (composite video).

---

What types of cables can I use to connect a video device to the Home Cinema 1060 projector?

You can use a component video to VGA cable, an HDMI cable, or an RCA video cable (composite video).

---

How do I connect a mobile media device to the Home Cinema 1060 projector?

Connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI2/MHL port using an MHL cable. Some devices may require an adapter, and not all features or functions may be supported. Check your device’s documentation for more information.

---

How do I connect a computer to the projector?

Connect one end of an HDMI cable to one of the projector’s HDMI ports and the other end to an HDMI port on your computer.

---

How can I connect audio when using an HDMI connection?

The projector has a built-in speaker that can play audio from a video source (DVD player, streaming device, etc.) connected by an HDMI cable.

---

How do I connect audio if I’m not using an HDMI connection?

If you do not use an HDMI connection, you must connect your device’s audio output to the projector’s audio input.

---

How do I connect external speakers to the projector?

Connect your device’s audio output to your home theater receiver or powered speakers. The internal speaker is disabled when an external device is connected. If you are using an HDMI connection to the projector, you may need to reduce the projector speaker volume to zero (0), or make sure that the correct audio output is selected on your device.

---

What are the steps to turn on the equipment?

1. Turn on your video source or computer.
2. Plug in the projector. The power light on the projector turns blue.
3. Open the A/V Mute slide all the way.
4. Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on.

---

How do I shut down the projector?

To shut down the projector, press the power button twice.

---

How do I navigate the Home screen?

Use the arrow buttons on the remote control to highlight any options on the Home screen that appears, then press the center button to select it. You can switch between projection sources and quickly access various adjustment options from this screen.

---

How do I change the menu language?

Press the Menu button on the projector or the remote control. Select Extended and press the center button. Select Language and press the center button. Select your language and press the center button. Press the Menu button to exit the menu system.

---

What do I do if I don’t see an image?

Press the Source Search button on the projector or the remote control to select the image source.

---

How do I raise the image?

Press the foot release button and lift the front of the projector. Release the button to lock the foot in position.

---

How do I reduce or enlarge the image on the Home Cinema 660 projector?

Press the T (reduce) or W (enlarge) button on the projector.

---

How do I reduce or enlarge the image on the Home Cinema 760HD/1060 projector?

Turn the zoom ring.

---

How do I sharpen the image?

Turn the focus ring.

---

How do I correct the image if it looks like this: or ?

Place the projector directly in front of the center of the screen, facing the screen squarely. If you can’t move the projector, use the horizontal keystone slider on the projector to correct the image shape.

---

How do I correct the image if it looks like this: or ?

Your projector automatically adjusts these images, but if necessary you can press the or button on the projector to correct it.

---

What are the functions of the remote control?

• Choose which source to display
• Turn projector on and off
• Access projector menus
• Turn off projector display
• Access the Home screen
• Navigate projector menus

---

What should I do if I see a blank screen or the ‘No signal’ message after turning on my computer or video device?

• Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open.
• Press the Source Search button on the projector or remote control to switch to the correct image source, if necessary.
• Press the Home button on the projector or remote control to verify the source input and settings.
• On Windows® 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
• If you’re using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as. You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
• If you’re using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

---

Where can I find the online manual for the projector?

Click the icon on your desktop to access the online manual (requires an Internet connection). If you don’t have a User’s Guide icon, you can install it from the projector CD or go to the Epson website.

---

How can I get telephone support?

To use the Epson® PrivateLine® Support service, call (800) 637-7661. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

---

What are the support hours for telephone support?

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice.

---

Where can I find Internet support?

Visit http://www.epson.com/support (U.S.) or http://www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.

---

How can I register my projector?

You can use the CD included with your projector or register online at http://www.epson.com/webreg.

---

Where can I purchase optional accessories?

You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://www.epsonstore.com (U.S. sales) or http://www.epsonstore.ca (Canadian sales).