FREE ENGLISH EPSON LS800BATV (01) PDF USER GUIDE
FREE ENGLISH EPSON LS800BATV (01) PDF USER MANUAL
FREE ENGLISH EPSON LS800BATV (01) PDF OWNER GUIDE
FREE ENGLISH EPSON LS800BATV (01) PDF OWNER MANUAL
FREE ENGLISH EPSON LS800BATV (01) PDF REFERENCE GUIDE
FREE ENGLISH EPSON LS800BATV (01) PDF INSTRUCTION GUIDE
FREE ENGLISH EPSON LS800BATV (01) PDF REFERENCE MANUAL
FREE ENGLISH EPSON LS800BATV (01) PDF INSTRUCTION MANUAL
FREE ENGLISH EPSON LS800BATV (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD EPSON LS800BATV (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
EPSON LS800BATV (01) PDF SUMMARY:
What should I do before using this product?
Make sure you read the instructions and the safety instructions in the online User’s Guide before using this product.
How does my product compare to the illustrations in the PDF?
Your product may differ from the illustrations in the PDF, but the instructions are the same.
What does the projector box include?
The projector box should include all of these parts:
- Projector
- Remote control
- Power cord
- Quick Start Guide
Where can I place the projector?
You can place the projector on almost any flat surface. See the online User’s Guide for more information.
What should I do with the furniture before setting up the projector?
Move the furniture you will place the projector on to its final location. This will give the furniture time to settle into the floor as needed, which is especially important for softer surfaces like carpets and rugs.
What is the distance from the top of the projector to the bottom of the projected image?
The distance from the top of the projector to the bottom of the projected image is 5.9 inches (14.9 cm) for a 100-inch image and 7.5 inches (19 cm) for a 120-inch image.
How do I position the furniture in relation to the wall or screen?
Place the furniture based on the distance measurements indicated below:
| 100-inch image | 120-inch image | |
|---|---|---|
| A – Front of projector | 17.3 inches (43.9 cm) | 20.2 inches (51.4 cm) |
| B – Rear of projector | 3.8 inches (9.8 cm) | 6.8 inches (17.3 cm) |
What should I do if my furniture has adjustable feet?
If your furniture has adjustable feet, use them to level the furniture (allow time for settling as needed).
How should I place the projector on the furniture?
Place the projector on top of your furniture and align it with the expected center of the wall or screen you will project onto.
What does the projector include?
Your projector includes built-in Android TV with apps that can be launched when the remote control is paired to the projector.
How can I stream content on the projector?
To stream content, make sure you have a wireless Internet connection and an active streaming account and log in as necessary for each app.
What is Chromecast built-in?
You can stream content from devices using Chromecast™-compatible apps. See the online User’s Guide for details.
Can I use voice commands with the projector?
Yes, you can send voice commands to the projector using the remote control. See the online User’s Guide for details. This feature may not be available in all regions.
How do I connect a video device or computer to the projector?
Remove the side cover and connect one end of an HDMI® cable (not included) to one of the projector’s HDMI ports and the other end to an HDMI port on your video device or computer. See the online User’s Guide for details.
What is an important caution to follow when connecting a video source to the projector?
Do not turn on the video source before connecting it to the projector; you may damage the projector.
What should I do if I need an HDMI adapter cable?
Some external video sources may require an optional HDMI adapter cable.
Which HDMI port should I use to connect an external audio/video receiver?
If you are connecting an external audio/video receiver to the projector, use the projector’s HDMI2 (ARC) port.
Which HDMI port should I use to connect a video game console?
If you are connecting a video game console to the projector, use the projector’s HDMI3 (Game) port.
Where can I find more information about connecting the projector to other devices?
For more information on connecting the projector to your computer or other devices (camera, USB flash drive, etc.), see the online User’s Guide.
How does the projector play audio?
The projector has built-in speakers that can play audio from the video source you are viewing.
Can the projector play sound from a device connected via Bluetooth®?
Yes, you can also use the projector’s speakers to play sound from a device connected via Bluetooth®. See the online User’s Guide for details.
How can I connect the projector to an amplifier or speakers?
You can connect the projector to an amplifier or speakers through the Optical Out port. See the online User’s Guide for more information.
What should I do before turning on the projector if I am using an external video device or computer?
If you are projecting from an external video device or a computer, make sure it is connected to the projector first and turn it on after the projector is turned on.
What are the steps to turn on the projector?
- Remove the side cover, if necessary.
- Install the batteries in the remote control.
- Plug in the projector.
- Press the power button on the projector or remote control. The status light flashes blue and then stays on.
- Follow the on-screen instructions to pair the remote control and projector, select your language, connect to your wireless network, and sign in to your Google Account. You only need to pair the remote the first time you use it.
How do I shut down the projector?
To shut down the projector, press the power button on the projector or the remote control.
What should I do if I purchased an Epson® SilverFlex® screen?
If you purchased an Epson® SilverFlex® 100-inch (ELPSC35) or 120-inch (ELPSC36) screen, see your screen documentation for installation instructions.
How can I adjust the image position?
To adjust the image position, move the projector while keeping it level and parallel to the screen. To adjust the image height, rotate the rear foot to extend or retract it.
How can I adjust a tilted image?
To adjust a tilted image when the projector is set on a flat surface, adjust the front feet so both sides are level.
How do I adjust the image sharpness?
- Remove the side cover, if necessary.
- Move the focus lever up or down to adjust the image sharpness.
- Replace the side cover.
Where can I find more detailed adjustment methods?
For more detailed adjustment methods, see the online User’s Guide.
What are the functions of the remote control?
The remote control has the following functions:
- Go back to previous function
- Adjust projected image size and position
- Turn off audio temporarily
- Access projector menus
- Microphone/light
- Turn projector on or off
- Turn off video temporarily
- Display Android TV application list
- Navigate menus
- Access Android TV menus
- Use voice commands with Google Assistant
- Display YouTube Music
- Display Android TV home screen
- Choose input source
- Turn volume up or down
- Enter a selection
- Display HDMI3 (Game) source
- Adjust brightness
Do I need to pair the remote control to the projector to use Android TV?
Yes, you must first pair the remote control to the projector to use Android TV and video-on-demand features. See the online User’s Guide for more information.
What should I do if I see a blank screen?
- Press the blank button on the remote control to see if the image was turned off.
- Make sure your computer or video device is properly connected.
- Make sure the status light on the projector is blue and not flashing.
- Press the power button on the projector or remote control to wake the projector from standby or sleep mode, if necessary.
What should I do if I see a blank screen when a computer is connected?
- On Windows®, hold down the Windows key and press P at the same time, then click Duplicate.
- If you are using a Mac laptop with macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
- On macOS 11 and older, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
What should I do if the projector does not respond to remote control commands?
Make sure the batteries in the remote control are installed correctly. Replace the batteries if necessary.
Where can I register my product?
You can register online at http://epson.com/register (U.S.) and http://epson.ca/register (Canada).
Where can I find the online manual for the projector?
You can view or download the online manual from the Epson website.
Where can I find internet support for the projector?
Visit http://epson.com/support (U.S.) or http://epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
How can I use the Epson® PrivateLine® Support service?
Call (800) 637-7661 to use the Epson® PrivateLine® Support service. This service is available for the duration of your warranty period.
How can I speak with a support specialist?
You can speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
What are the support hours?
Support hours are 7 am to 4 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long-distance charges may apply.
Where can I find a list of optional accessories?
For a list of optional accessories, see the online User’s Guide.
Where can I purchase screens or other accessories?
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).
CLICK HERE TO DOWNLOAD EPSON LS800BATV (01) PDF MANUAL