EPSON POWERLITE EB-L635SU (01) PDF MANUAL

EPSON POWERLITE EB-L635SU (01) PDF SUMMARY:

How do I display the Home screen?

Press the button.

How do I open menus assigned by the user?

Press the button.

How do I enter numbers?

Hold down the button and use numeric buttons to enter numbers.

How do I return a setting to its default value?

Press the button.

How do I turn the projector on or off?

Press the button.

How do I open projector menus?

Press the button.

How do I automatically adjust the computer image?

Press the button.

How do I navigate through menu settings?

Press the or buttons.

How do I temporarily turn off the display and audio?

Press the button.

How do I zoom in or out on part of an image?

Press the button.

How do I select color modes?

Press the button.

How do I change the aspect ratio?

Press the button.

How do I split the screen between two inputs?

Press the button.

How do I control the volume?

Press the or buttons.

How do I cancel the current operation or return to the previous menu?

Press the button.

How do I switch image sources?

Press the button.

How do I select a source?

Press one of the buttons.

How do I select which projector to control?

Hold down the button and use numeric buttons to select which projector to control.

How do I freeze the image?

Press the button.

How do I display a test pattern from the remote control using the Settings menu?

See the online User’s Guide.

How do I display a test pattern?

1. Press the button on the projector.
2. Press the button to change the test pattern.
3. When you’re done, press the button to clear the test pattern.

How do I change the screen type?

Set the Screen Type setting to the screen’s aspect ratio.

1. Press the button.
2. Select > .
3. Select the screen’s aspect ratio.

Note: The displayed image should match the screen’s size and shape.

4. When you’re done, press the button to exit.

Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the button on the remote control to change the aspect ratio, if necessary.

How do I adjust the image on the PowerLite EB-L630SU/EB-L635SU?

See the online User’s Guide for instructions on adjusting the image using the projector menus.

How do I correct the image shape?

If your image is uneven on the sides, you can use the projector’s distortion correction features, such as H/V-Keystone, Quick Corner®, and Arc Correction, to adjust the shape. See the online User’s Guide.

Where can I find information about using the projector’s features to improve the image quality?

See the online User’s Guide.

How do I turn the projector off?

Press the button on the projector or remote control. If you see a confirmation message, press the power button again.

Note: If the Direct Power On function is enabled, you can flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the online User’s Guide.

With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.

How do I turn the projector on?

1. Turn on your computer or image source.
2. Press the button on the projector or remote control. After the status light stays blue, the projector is ready.

Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide.

3. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.”

How do I change the language of the projector menus?

The default language of the projector’s menu system is English, but you can change it as necessary.

1. Press the button to access the projector’s menu system.
2. Select > .
3. Select your language.
4. When you’re done, press the button to exit.

How do I switch between image sources?

Press the button or one of the buttons on the remote control.

Where can I find manuals?

For more information about using the projector, you can view or download the online manuals from the Epson website, as described below.

Where can I get internet support?

Visit http://www.epson.com/support (U.S.) or http://www.epson.ca/support (Canada) and search for your product to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

How do I speak to a support representative?

To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

How do I purchase supplies and accessories?

You can purchase an air filter (V13H134A56), screens, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://www.epsonstore.com (U.S. sales) or http://www.epsonstore.ca (Canadian sales).

For a list of optional accessories, see the online User’s Guide.

How do I adjust the image position using lens shift on the PowerLite EB-L520U?

See the online User’s Guide for instructions on adjusting the image position using the projector menus.

How do I adjust the image position using lens shift?

1. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image.
2. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet.

How do I focus and zoom?

• Turn the focus ring to sharpen the image.
• Turn the zoom ring to reduce/enlarge the image.

What do I do if I see a blank screen or the message “No signal”?

• Make sure the status light on the projector is blue and not flashing.
• Make sure the cables are connected correctly. See the online User’s Guide.
• You may need to change the image source. See “Switching Between Image Sources.” Also make sure the source device is turned on.

What do I do if the projector and the notebook don’t display the same image while using Windows?

If you are using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.

On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.

What do I do if the projector and the notebook don’t display the same image while using a Mac?

Open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

How do I display the Home screen?

Press the button.

How do I open menus assigned by the user?

Press the button.

How do I enter numbers?

Hold down the button and use numeric buttons to enter numbers.

How do I return a setting to its default value?

Press the button.

How do I turn the projector on or off?

Press the button.

How do I open projector menus?

Press the button.

How do I automatically adjust the computer image?

Press the button.

How do I navigate through menu settings?

Press the or buttons.

How do I temporarily turn off the display and audio?

Press the button.

How do I zoom in or out on part of an image?

Press the button.

How do I select color modes?

Press the button.

How do I change the aspect ratio?

Press the button.

How do I split the screen between two inputs?

Press the button.

How do I control the volume?

Press the or buttons.

How do I cancel the current operation or return to the previous menu?

Press the button.

How do I switch image sources?

Press the button.

How do I select a source?

Press one of the buttons.

How do I select which projector to control?

Hold down the button and use numeric buttons to select which projector to control.

How do I freeze the image?

Press the button.

How do I display the Home screen?

Press the button.

How do I open menus assigned by the user?

Press the button.

How do I enter numbers?

Hold down the button and use numeric buttons to enter numbers.

How do I return a setting to its default value?

Press the button.

How do I turn the projector on or off?

Press the button.

How do I open projector menus?

Press the button.

How do I automatically adjust the computer image?

Press the button.

How do I navigate through menu settings?

Press the or buttons.

How do I temporarily turn off the display and audio?

Press the button.

How do I zoom in or out on part of an image?

Press the button.

How do I select color modes?

Press the button.

How do I change the aspect ratio?

Press the button.

How do I split the screen between two inputs?

Press the button.

How do I control the volume?

Press the or buttons.

How do I cancel the current operation or return to the previous menu?

Press the button.

How do I switch image sources?

Press the button.

How do I select a source?

Press one of the buttons.

How do I select which projector to control?

Hold down the button and use numeric buttons to select which projector to control.

How do I freeze the image?

Press the button.