Free English ELECTROLUX LRD6400IK (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ELECTROLUX LRD6400IK (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I operate the ELECTROLUX LRD6400IK hob?
The ELECTROLUX LRD6400IK is operated using the knobs of the oven. Please refer to the Daily Use section in the user manual for the oven for complete operational instructions.
What does the residual heat indicator on the ELECTROLUX LRD6400IK mean?
The indicator on the ELECTROLUX LRD6400IK activates when a cooking zone is hot. As long as this indicator is visible, there is a risk of burns from residual heat. The indicator may also appear for neighbouring cooking zones even if they are not in use, when hot cookware is placed on a cold cooking zone, or when the hob is deactivated but the cooking zone is still hot. It will disappear once the cooking zone has cooled down. Please note that the indicator does not function if the mains power is disconnected.
What are the cooking zone specifications for the ELECTROLUX LRD6400IK?
The cooking zones for the ELECTROLUX LRD6400IK have the following specifications:
| Cooking zone | Nominal Power (Max heat setting) [W] | Cooking zone diameter [mm] |
|---|---|---|
| Left front | 2300 | 210 |
| Left rear | 1200 | 145 |
| Right front | 1200 | 145 |
| Right rear | 1800 | 180 |
What are some tips for using cookware with the ELECTROLUX LRD6400IK?
To ensure optimal performance and safety with your ELECTROLUX LRD6400IK:
1. Use cookware that is as thick and flat as possible to prevent overheating and improve zone performance.
2. Ensure the bases of the cookware are clean and dry before placing them on the hob surface.
3. Always be careful not to slide or rub the cookware on the edges and corners of the glass, as it may chip or damage the surface.
4. Avoid using cookware made of enamelled steel or with aluminium or copper bottoms, as these can cause colour changes on the glass ceramic surface.
5. Always use cookware that does not exceed the diameter of the cooking zone.
How do I clean the surface of the ELECTROLUX LRD6400IK?
Regular maintenance is important for the ELECTROLUX LRD6400IK:
1. Clean the hob after every use.
2. Always use cookware with a clean base.
3. Use a special cleaning agent suitable for the hob surface.
4. Use a scraper recommended for glass-surface hobs only as an additional tool for cleaning after the standard cleaning procedure.
5. Remove immediately: melted plastic, plastic foil, salt, sugar and food containing sugar. Use a special hob scraper at an acute angle to move the blade across the surface, taking care to avoid burns.
6. When the hob has cooled sufficiently, remove: limescale rings, water rings, fat stains, and shiny metallic discolouration using a damp cloth and a non-abrasive detergent. Wipe dry with a soft cloth.
7. To remove shiny metallic discolouration, use a solution of water and vinegar and clean the glass surface with a cloth.
Warning: Never use knives or other sharp metal tools to clean the glass surface.
What should I do if the ELECTROLUX LRD6400IK does not work?
If you encounter issues with the ELECTROLUX LRD6400IK, consider the following troubleshooting steps:
| Problem | Possible cause | Remedy |
|---|---|---|
| You cannot activate or operate the hob. | The fuse is blown. | Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. |
| Residual heat indicator does not come on. | The zone is not hot because it operated only for a short time or the sensor is damaged. | If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. |
How can I save energy while using the ELECTROLUX LRD6400IK?
You can save energy while cooking with the ELECTROLUX LRD6400IK by following these tips:
1. When heating up water, use only the amount you need.
2. Always put lids on your cookware whenever possible.
3. Before activating the cooking zone, place the cookware on it.
4. The cookware bottom should have the same diameter as the cooking zone.
5. Use smaller cookware on smaller cooking zones.
6. Place the cookware directly in the centre of the cooking zone.
7. Use the residual heat to keep the food warm or to melt it.
CLICK HERE TO DOWNLOAD ELECTROLUX LRD6400IK (01) PDF DOCUMENT