Click here to download ELECTRIQ EIQ-50FHDT2SM (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** electriea 40/50/55 inch LED TV ElQ-40FHDT2SM ElQ-50FHDT2SM ElQ-55FHDT2SM EDTV

****** Page 2 ****** CONTENTS Safety Information What’s included TV Stand Installation/Removal Getting Started Connecting to External Devices Remote Control Settings 12 Smart TV Setup and Settings Specifications 30 Support & Disposal 34 1 of 34

****** Page 3 ****** SAFETY INFORMATION Read these instructions — All the safety and operating instructions should be read before this product is operated. Keep these instructions — The safety and operating instructions should be retained for future reference. Heed all warnings — All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions All operating and usage instructions should be followed. Do not use this equipment near water —I The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. Clean only with a dry cloth. Do not use solvents or petroleum based fluids. Do not block any ventilation openings. Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat. Do not tamper with the supplied plug. This plug is a BS1363 standard plug. Protect the power cord from being walked on or pinched, particularly at the plug and at the point where they exit from the appliance. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped. Please keep the unit in a well-ventilated environment. The TV set should only be connected to a mains power supply as rated on the back of the equipment. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on the cable as this may cause damage. Hold the main plug, not the wires, when removing from a socket. 2 of 34

****** Page 4 ****** Pull the plug out immediately and seek professional help if the main plug or cable is damaged, liquid has spilt onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally. Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. To avoid battery leakage, remove exhausted batteries from the remote control when not in use for a long period. Do not block ventilation slots on the back cover. The TV can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the TV screen, this may damage internal components. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible. WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire. This warning sign is to warn of dangerous voltage inside the product. CAUTION: To reduce the risk of electric shock, DO NOT remove the cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This warning sign is to alert you of important instructions accompanying the product. This equipment is a Class II or double insulated electrical appliance. It does not require a grounded connection. AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING. 3 of 34

****** Page 5 ****** WHAT’S INCLUDED TV Set Remote Control (2xAAA batteries) Base Stand electri(.å User Manual 6 Screws 4 Of 34

****** Page 6 ****** TV STAND INSTALLATION/REMOVAL 40 Inch (ElQ-40FHDT2SM) 200mm: O ji’llåi—=a O Four Mounting Holes (Size M6 Screws) 4 Screws 4*20 BMH 50 Inch (ElQ-50FHDT2SM) 6 Screws 4±23 BMH 55 Inch (ElQ-55FHDT2SM) O 6 Screws 4±23 BMH -2QQmm-. 200 mm O Four Mounting Holes (Size M6 Screws) 400 mm 200 I mm Four Mounting Holes (Size M6 Screws) 5 of 34

****** Page 7 ****** WALL MOUNTING The TV is provided with mounting holes for a VESA approved wall mounting bracket (not supplied) The VESA mounting pattern is: 0 40/501nch – 200x200mm and the size of the screws is 4 x M6 x 12 (not supplied) 0 551nch — 400x200mm and the size of the screws is 4 x M6 x 12 (not supplied) Do not use screws longer than 12mm or damage will occur to the internal components. NOTE: As the TV set is considered heavy, please consult with a professional wall mount installer to perform the installation. GETTING STARTED BUTTON FUNCTIONS il’lläii—* 1. 2. 3. 4. 5. 6. 7. 8. 9. POWER BUTON: To turn ON/OFF the TV SOURCE Button: To select the input source. MENU Button: To enter menu setting page. VOL-: To decrease the volume level. o o o o o o o o VOL+ o o o O POWER o VOL+: To increase the volume level CH-: To select previous channel CH+: To select next channel Remote Control Sensor Power Indicator: In standby mode the indicator light will display red, when switching on the unit the indicator light will display green. 6 of 34

****** Page 8 ****** INPUT / OUTPUT TERMINALS o —O HOM12 O USOi/USB2 O VGA PC AUDIO SCART HOMIt 1. 2. 3. 4. 5. 6. 7. 8. 9. Headphones AV input terminal YPbPr: Connect to the YPbPr video output terminal of the DVD player Back USB x2. Provides access to SMART TV. Connect smart remotes, keyboards, gaming accessories or usb flash drive Side USB x 1 can be used for DTV recording, timeshift or as a media player file. Note: only connect low power USB flash drives or externally powered hard drives to the 3x USB ports as they only provide 0.5 Amps power RF: Antenna connection Coaxial output terminal HDMI x2 Scart input terminal PC Audio: connect it to the audio output terminal of the PC 10. VGA: PC Video input 11. RJ45: Smart TV ethernet connection can be used instead of WIFI connection 7 of 34

****** Page 9 ****** CONNECTING TO EXTERNAL DEVICES RJ46 USB1/USS2 SCART SCART Cable HOW’ HDMI Cable VHF/UHF Antenna VGA Cable Audio Cable RF coaxial Cable Cable TV Coaxial Audio Amp O O BD/DVD Player Component Cable Cable Receiver / Satellite Box Composite Cable 8 of 34

****** Page 10 ****** REMOTE CONTROL 1. POWER: Turn on the TV/Standby 2. MUTE: Mute or restore the sound 3. SOURCE: Press to change the signal source 4. S. MODE: Setting audio options 5. P. MODE: Output image/picture mode selection 6. AUDIO: Switch the audio channel when DVD or multimedia playing. 1/11: In the TV mode, press this button to select the stereo size 7. P. SIZE: Press to select the different picture size. 8. NUMBER KEYS: Change the channel 9. FAV. CH: Show the list of favourite channels 10. SLEEP: Auto Power Off Timer 11. JUMP: Return to the previous selected channel 12. MENU: Show Menu 13. EXIT: Exit the Menu 14. INFO: Show information about the current program 15. NAVIGATION KEYS (Up, Down, Left, Right and 0K): To move in the menus and confirm settings. Also in smart mode used for navigation or scrolling (with mouse disabled) 16. V+ / V-: Increase / decrease volume 17. P+ / p-: Next / previous channel 18. REPEAT: Repeat mode 19. D.SETUP (disabled, used only in DVD combo models) 20. ZOOM: Zoom in/out the display frame 21. GOTO: Play from the desired location O o O 18 26 30 34 POWER P.MODE S.MODE MUTE O AUDIO 1/11 INFO SOURCE P.SIZE DELETE FAV.CH SLEEP JUMP EXIT ENU MENU 0K PVR.UST TIME HIFT O 14 17 20 24 28 32 33 36 HOME TEXT SUBTITLE GUIDE 22. TIME SHIFT: In DTV mode, press TIME SHIFT button to start the delay function, press the button to start playing delay program, press the button to terminate the delay function 9 of 34

****** Page 11 ****** @Reveals hidden information such as the answers to a quiz in TELETEXT Mode 23. PVR LIST: IN DTV mode, displays the executed PVR LIST. @ Displays the main index in TELETEXT mode. 24. USB: Press to switch to USB signal source directly. @ Displays the top, bottom or all of the page. 25. DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or RADIO mode. @ Freeze a multi-page selection on TELETEXT mode. Stop Playback 27. REC: In DTV mode, press REC button to start recording, press stop recording. SMART SMART Provides quick access to the smart TV functions 28. Play/Pause 29. Fast Forward playback 30. 31. Rewind playback Previous file or chapter 32. *Next file or chapter 33. 34. TEXT: Turn on and off the Teletext function 35. D.MENU (disabled, used for DVD combo model only) button 36. SUBTITLE: Select subtitle of media video file (requires the support of disk or file) 37. GUIDE: Show the Electronic Program Guide (EPG) oo o Press the appropriate colour to direct access functions in TELETEXT or EPG OSD mode SMART CONTROLS when the TV is in smart mode the following keys are activating android navigations functions Use arrows to navigate the smart TV menu and 0K key to select. Basic navigation and text input can be done via those keys. Certain functions will required virtual remote or the optional all-in-one advanced remote. While mouse emulation is off the arrow keys deliver basic scrolling. 10 of 34

****** Page 12 ****** MENU MENU contextual menu and options BACK key navigation rns on / off the mouse emulation. Use the arrows to navigate and 0K to select. To return to keys navigation press mouse key again. SEARCH Search function enable quick text search HOME function returns to the main smart tv menu HOME The smart navigation on standard TV remote control provides basic smart tv navigation and flawless Kodi operation. How to use mouse emulation button from remote: Press the yellow MOUSE key. You will get an arrow cursor on the screen. Press the arrow keys to control the cursor up/down/right/left. Use “0K” button to confirm as left mouse click. Use “Back” button to confirm as right mouse click. For an enhanced experience, when you play games or operating other complex apps we recommend using virtual smart phone remotes or the optional extended gyroscopic all-in-one remote with keyboard. If using a hardware standard USB mouse the following functions are mapped: Left click confirm; Right click —I Back navigation; mouse wheel: scroll, page up and down; Middle click — Menu. BATTERY INSTALLATION 1. Open the battery cover. 2. Insert 2 AAA batteries in the battery compartment, matching the polarities correctly. 3. Replace the battery cover. 11 of 34

****** Page 13 ****** SETTINGS INITIAL SETUP 1. 2. Connect the TV set to a power outlet. Press the POWER button on the remote or on the TV set to turn on the TV (the indicator will be lit green) NOTE: Pressing the power button on the remote or TV set will place the TV into standby mode only. If the TV set is expected to be not in use for a long period of time, please disconnect it from the power source. 3. Press the V/ A to choose the preferred item and press 0K button to confirm the settings. First Time Setup OSD Language Mode Setting Country Tuner Type Auto Scan LCN Auto Channel Update Move o Adjust Auto Scan English Home Mode Scanning Cable Digital Channels Found: DTV+ATV 114 MHz Data: Start Off Off MENU. Return DTV: O Radio: Analog Channels Found: EXIT: Exit 12 of 34 MENU: Skip EXIT: Exit

****** Page 14 ****** SELECT INPUT SOURCE Available options: DTV, ATV, AV, SCART, YPbPr, HDMI 1, HDMI 2, pc, MEDIA, SMART TV Press SOURCE button to display the input source list. Press A / Vor SOURCE button to select the preferred input source. Press 0K button to confirm. Press EXIT button to exit. BASIC OPERATIONS SOURCE DTV AV SCART YPbPr HDMI 1 HDMI 2 MEDIA Smart TV Exit 1. 2. 3. 4. Press the MENU button on the remote control or on the TV to enter the menu page. Use < / buttons to select the main menu options. Use A/ V buttons to navigate up and down within the menu. Use the < / buttons to alter the required setting then press the MENU Picture Picture Mode Brightness Contrast Sharpness Saturation Hue Color Temp Aspect Ratio Move Standard Standard MENU: Return 50 50 50 50 EXIT: Exit button to confirm and return to the previous menu page or press EXIT button to exit the menu. PICTURE MENU Press MENU button to enter the main menu. Picture Mode Br'ghtness Contrast Sharpness Saturation Hue Color Temp Aspect Ratio iMove Picture Standard 50 50 50 50 Standard Full MENU: Return EXIT: Exit saee•n After the preferred settings are done, press MENU button to confirm and return to the previous menu page or press EXIT button to exit the menu. 13 of 34 ****** Page 15 ****** SOUND MENU Press MENU button to enter the main menu EQ Setting Sound Mode Treble Bass Balance Surround Sound EQ Setting AVL SPDIF Move Audio Description Sound Type Move Sound Sound Standard Off MENU: Return Stereo EO Mode 120 HZ 300 HZ 500 HZ 12K HZ 3.0K HZ 7.5K HZ 10K HZ Move Adjust User MENU: Return EXIT. Exit EXIT: Exit EXIT: Exit 0K: Select MENU: Retum After the preferred settings are done, press MENU button to confirm and return to the previous menu page or press EXIT button to exit the menu. CHANNEL MENU Press MENU button to enter the main menu. Press 4/ button to select Channel in the main menu and press 0K then v to enter. Scan Manud Sen Aub : Uo•ee O Adpt exrt 1. 2. Press A/ V button to select the option that you want to select the preferred item. Press 0K button to enter sub-menu 14 of 34 ****** Page 16 ****** 3. Press MENU button to return back to previous menu or press EXIT button to exit the menu TUNER TYPE Press A / V button to select tuner type, then press button to select the type of antenna, either Antenna or Cable. Tuner type is Antenna Auto Scan Country Start Move > Adpst AUTO SCAN Tuner type is Cable MENU: Return EXIT: Exit Countrv Scan Tm Netnork ID Frequency Symbol Rate Stat Mwe Auto Scan QuEk Auto Auto MENU: Rearn EXIT: Exn Press A / V to select Auto Scan then press 0K, then button to enter sub- menu. Country Press / button to select country. Mode Press < / button to select Mode: DTV+ATV, DTV, ATV. Scan Type Press button to select Scan Type: Advanced, Quick, Full. Network ID Press button to select Network ID: Auto or enter digital numbers. Frequency Press button to select Frequency: Auto or enter digital numbers. Symbol Rate Press < / button to select Symbol Rate: Auto or digital numbers. 15 of 34 ****** Page 17 ****** Start Press 0K/ button to start the auto searching. It will search digital channels first, then analogue channels. Before executing auto channel search please make sure the preferred tuner type is chosen. Wrongly setting the tuner type may cause failure to find channels. MANUAL SCAN Search for the channels manually. Press A/ V button to select Digital Scan then press 0K/ button to enter sub-menu. Tuner type is Antenna Digital Manual Scan Manual Scan Sean Tuner type is Cable Digital Manual Scan Digital Scan Start F requency Strength Move O Adjust Network ID CH5 177.50 MHz 78 0-9: Input MENU: Return EXIT: Exit Network ID Frequency Symbol Rate Modulation Start Strength Move Adjust Auto 474000 KHz Auto MENU: Return EXIT: Exit Press < / button to select Network ID: Auto or enter digital numbers. Frequency Press / button to select Frequency: Auto or enter digital numbers. Symbol Rate Press button to select Modulation: Auto, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM. 16 of 34

****** Page 18 ****** Start Press 0K/ button to start the channel searching. AUTO CHANNEL UPDATE Press 4/ > button to select Auto Channel Update then press 0K/ > button to select On or Off. CHANNEL EDIT Press < / button to select Auto Channel Update then press 0K / button to enter sub-menu. Aub Sw) Manud SCM Fav«iE RED button: Delete GREEN button: skip 001 002 007 011 800 801 Channel Edit BBC ONE BBC TWO BBC CHOICE BBC TEXT BBC NEWS 24 PAL scr PAL Clear Exrt Skip : Move o Page Move MENU: Return EXIT: Exit Blue button: Press this button to set the selected channel you want to move. Press A / V to move the selected channel to the preferred position and press this button again to confirm. After the setting is done, press MENU button to return to the previous menu page or press EXIT button to exit the menu. NOTE: Press the CH+/- to view the channels. 17 of 34 ****** Page 19 ****** FAVOURITE MANAGER Favorite Manager 0007 0011 Program Name ONE Cear Fm-tte 2 6 Press A/ V button to highlight the channel you would like to set as favourite channel. Press the RED button to set it in favourite group 1. Press the GREEN button to set it in favourite group 2. Press the YELLOW button to set it in favourite group 3. Press the BLUE button to set it in favourite group 4. NOTE: Pressing the FAV button on the remote control will display the Favourite List. SIGNAL INFORMATION (only available in DTV mode) Netvjork Name C hannel Frequency Modulation Strength Quality Signal Information Network TEN CH5 177.50 MHz MENU: Return EXIT: Exit Press MENU button to enter main menu and select "Signal Information". 18 of 34 ****** Page 20 ****** LOCK SYSTEM MENU Press MENU button to enter the main menu and select Lock System Enter Password Enable Channel Locks Parental Rating Lock Keypad New Password CEear Lock Move Off None Off Enter Password Enable Channel Locks Parental Rating Lock Keypad New Passvvord Clear Lock 0-9: Input MENU: Return EXIT: Exit Move Adjust 'Lock System" Lock System on None Off MENU: Return EXIT: Exit The lock system enables you to put a password on the TV set. The default password is 0000. To make changes, enter the password and use the A / V to navigate to the required setting. Press the to make the required changes then press the MENU button to return or EXIT to exit. SETUP MENU Press MENU button to enter the main menu and select “Setup”. Setup OSO Language Audio Languages Subtitle Teletext Blue Screen Mode Setting Time Settings PVR Settings > Move English Home Mode MENU: Return EXIT: Exit First Time Setup Move Setup 0K: Select MENU: Return EXIT: Exit To make changes use the A / V to navigate to the required setting. Press the < / to make the required changes then press the MENU button to return or EXIT to exit. First Time Setup Press A / V button to select First Time setup and press 0K button to enter. Audio Languages Set the Primary and Secondary preferred audio languages. 19 of 34 ****** Page 21 ****** Subtitle Select the preferred default subtitle languages. Teletext Set the preferred default Teletext language. Blue Screen Turn On or Off the Blue Screen. Mode Setting Select Home Mode for home use or Store Mode for display purposes. Time Settings OSD Timer — Set the time the OSD will show Time Settings 10 seconds OSD Twner Sleep Tinter Auto Sleep me Zone Tine : Move after the last button press. Select Off, 10, 20, 30 or 60 seconds. Sleep Timer Set the time the TV will play for before automatically going into standby. Select MENU. Return EXIT: Exit off, 5, 15, 30, 60, 90, 120 or 240 mins. Auto Sleep Set the time delay for the TV to turn off when idle. Select Off, 3, 4 or 5 hours. Time Zone Select the time zone you are in to set the clock. Time Set the time automatically with Auto Sync on or manually with it off. NOTE: In the case of loss of power the clock setting will be lost. GUIDE MENU (EPG) Press the GUIDE button to enter the TV guide menu. 01 Press the RED button to display the previous day's guide Press the GREEN button to display the next day's guide Press the YELLOW button to review the schedule set using BLUE button Press the BLUE button to set a reminder for the highlighted program 20 of 34 ****** Page 22 ****** PC SETUP MENU Press the SOURCE button on the remote control and select PC. Press the MENU button on the remote control to display the main menu. PC Setup Auto Adrast H Position V Position Phase Clock Move ENTER 0K: Select MENU: Return EXIT: Exit Press A / V on the remote control to select the item that you would like to adjust. Press < / to make changes to the relevant setting. Press the 0K button on the remote control to confirm the setting. After finishing your adjustment, press MENU button to return to the previous menu or press EXIT button to exit the menu. USB OPERATION Before the external USB device is connected to the TV please first press SOURCE button and set the input source to MEDIA. Insert USB device. Press < / button to select the item you require and press 0K to enter. Photo Press A/ V button to select the file you wish to display then press 0K button to enter. 21 of 34 ****** Page 23 ****** Outck Meru Press 0K button to start a slideshow. Press the button to select the previous/next image. Press EXIT to go back to the menu. Music Press the A/ V button to select the file you wish to play then press 0K button to enter. Play or pause Previous track Next track Rewind Fast Forwards O Stop Press CH+/- to switch between Playlist and Play Screen Press < / to change page and press 0K button to start playing Press EXIT button to exit to previous menu. Movie Press A/ V button to select the file you would like to play then press 0K button to enter. Press A / V button to select return option to go back to the previous menu. 22 of 34 ****** Page 24 ****** FEeNarne 4t t_2cNbaoy.vox • MOPEG PCM.avi VJPEG AutoCodec ' 640 x 480 Sarni*eRato 741352 Channoa PCM II P USE Play or pause Previous file Next file Rewind Fast Forwards O Stop Press EXIT button to exit to the previous page. Text Press A/ V button to select the file you would like to play then press 0K button to enter. Press A / V button to select return option to go back to the previous menu. 1B3 TO J.R.M, Part One CHAPTER I SCARLETT Oi HARA was not beautiful. but men seldom real?ized it when caught by her charm as the Tarleton were. In her face were tØ sharply blended the delicate features of mother, a Coast aristocrat of French de?scent, and the heavy ones of her florid Irish father- But it was an arresting face, pointed of chin, square of jaw. Her eyes were pale green without a touch of hazel, starred with bristly black lashes and slightly tilted at the ends. Above them, her thick black brows slanted upward, cutting a startling oblique line in her magnolia-white skim-that skin so prized by Southern wornen and so carefully guarded with bonnets, veils ard mittens against hot Geor?gia suns Seated with Stuart and Brent Tarleton in the cool shade of the porch of Tara. her fatheri I s plantation. that bright 4 Prevms/Next Paqe Ou•ck Mervu Press / to move to the previous/next page. Use the number keys to jump to a specific page Press EXIT to return to previous menu. 23 of 34 ****** Page 25 ****** SMART TV Your ElectriQ Smart TV contains and embedded computer great for streaming internet content or playing local media. Based on a fast quad-core processor and powerful 3D graphics IQ Smart offers unlimited open smart TV transforming your viewing experience. This Android based system opens a new world of content streaming including on demand and live TV, internet browsing, premium content, games, music, internet radio and much more. Benefitting of unlimited expandable storage via USB memory stick, externally powered SSD or HDD and the option to add a USB or WIFI keyboards your TV can be also be used as a computer running full Microsoft Office package for Android including Outlook or other email clients as K9. It is a great device that will find its place in living room, kids or guest bedroom or even in the executive boardroom. ACCESS TO SMART TV FUNCTIONS Select input source by pressing SOURCE Press A / V or SOURCE button to select SMART TV as main source. Press 0K button to confirm. Press EXIT button to exit. On certain remote models Smart TV can be accessed via the quick SMART green button Once in smart mode certain TV only functions will be disabled on the remote. Please consult the remote layout for android specific functions. FIRST TIME INSTALLATION Use your TV remote control to set up your Smart TV. Welcome Installation wizard! Please follow some simple steps to set up your SmartTV Start Configuration eeSnna (Ceskå republika) Language dansk (Danmark) Deutsch (Deutschland) EhovlKå (EÅÅå6a) Qhoose your Language: English (United Kingdom) English (United States) espahol (Espafia) espaöol (Estados Unidos) 24 of 34 ****** Page 26 ****** Network Ethemet network(LAN) Choose your network: Wireless network(Wi•Fi) Skip Select Ethernet (LAN) or WIFI as internet connection method. If WIFI signal is weak or you have a router within your reach please use wired connection via RJ45 connector and cat5e or better cable into your router. For connectivity over WIFI please an access point and input the WIFI key via remote or keyboard. VMSFlberFast2400 Choose Access Point VMSSUPERFAST mi5 VMSSUPER HUAWEI-Wghv Misu DIRECT-ff1BDlES6000 Time Zone Set time zone Casablanca. Dublin. Windhoek W. Africa Time Choose Accccc security WPA/WPA2 Segnal streyth Excdmt oasswvd Show Insswtrd. Catel Date/Time Set time +1 00 NST 52 Done Done Set Time zone, date and time if incorrect. Screen margins can be adjusted as well using the arrows keys on the remote and BACK button to save the settings when finished. Press key to control the size of the picture, Press back button when you think suze is Press 1.2.3.4 button to sele:t drection, The site of the pictLre is size of the screen. Status Language English (United Kingdom) Network WiFi ('miff) Time zone GMT+OI Date 02/06/2016 Time 7:52 am Complete You can go over first time installation at any time via WELCOME app. 25 of 34 ****** Page 27 ****** Interface Use arrow keys A/ V on the remote to select the preffered icon and press “0K” button to enter the sub- screen. Use Mouse button to turn on / off the mouse emulation and use the keys to move the mouse on screen. 0K will enable selection. Launcher tab contains: Weather information, Time, Wifi / Wired network, USB connection status (white for connected, gray for standby) The APP manager lets you view and launch pre-installed applications such as file browser, DLNA, miracast as well as offers acesss to all the installed applications. All The browser tab contains bookmarks and easy to use search bar. This makes it Web Browsing My Favorite more convenient when surfing the internet. You can search information and get quick access to streaming sites. Organize your favourite APPs in the special access folders. You can create quick sortcuts to favorite apps or media players. The + tile enable creation of quick access tiles on the main launcher great for frequently used Apps. My Player Install or access your favourite App Store App Store Settings tile contains most of the customizing and configuration options including language, location, network, screen and audio settings. Settings Other tile contains advanced settings such as Factory Reset, System Update (via usb update.zip or OTA) also access to full Settings menu. Applications Your Smart TV sets asides from other TVs by not being crippled by any restrictions. You can download apps from stores or you can sideload them. Side load or install apps from USB Download or copy the app installation file “APK” into any storage of the device including external USB devices. Choose and enter Appinstaller from All apps tile. Select the location where you placed the installation file. 26 of 34 0000

****** Page 28 ****** Choose the app name that you want to install, ex. A114. You will then be able to install the App by simply clicking on it. Install App Store In the main Smart TV launcher page use the remote to select the yellow icon “App Store” and press 0K to launch The device will upgrade after re- booting automatically. Please wait until the re-boot has completed successfully. Installing system Installing Apps o After the system has rebooted you can use Play Store by going to the yellow “App Store” icon on in the launcher. How to install Netflix, Youtube, BBC Media Player, BBC News, A114, ITV Hub, UK TV Play, ST V, Film on, Tunein Radio, Spotify, Kodi etc. from the App Store. 1st enter the App Store and sign in (if you don’t have an account you can create one at this point). Signing in… 2nd use the search function in the Play Store to enter the name of the App you mm TOWNS want to find. 3rd select the App from the search results and install/buy it. 27 of 34

****** Page 29 ****** E-Share E-Share will allow you to connect your TV to your smart connected devices, such as mobile phones and tablets. Connect your TV to your WiFi network and download the E-Share app from the corresponding app store. After you have downloaded the app you will be able to stream Enjoy Sharing Life video, photographs and music from any connected device and your phone as a smart remote. How to use E-Share Enter “E-share server” App on Smart TV. Make sure your phone is connected to the same Wi-Fi as the Dongle, enter the IP address shown on the screen and download the specific App for your phone (iOS/Android). After download and install, you will have e-share application for streaming media (video/ picture/ sound, similar to DLNA) to TV. And also share files or use your mobile phone as a remote to control your TV with touch, mouse, dpad, keyboard emulation or even via screen mirroring. Setting Directory sdcard Ege-mole EShare-9833 v use Storage Mouse Emylive Touch Keyboard WiFi AOB Best Recorder HO REC Screen Recorder Terrarium TV Apps Apps 28 of 34 the q vver asdfghj My 5 Google Play services Miracast UkTV Play Mouse ‘VOL Browser Kodi All a MX Player Touch Downloads Medaabrowse Welcome ITV gub Keyboard Play Mirror Tv

****** Page 30 ****** Miracast 1. 2. 3. 4. Enable the WiFi on the TV set. Open the Miracast app. On all Android devices with Android 4.2 or later connect the device to the TV using the WiFi settings on the Android device. Stream your media from your Android device to your TV. ret Note: different phones may have different connect step for Miracast, please kindly refer to the user manual of your mobile-phone. AirPlay Supported by iPhone 4S or newer, iPad mini 2 or newer, iPad 3/Air/Air 2/Pro. Unlock the device, slide up to open the bottom menu. Tap the AirPlay icon and select your TV from the list of devices. You are now ready to stream your media from your iOS device to your TV. Note: Make sure both streaming devices and the smart TV are on the same network. BBC Iplayer Input wet’ search Web Browsing atv 0000 TWO City in the Sky C•epar’l.ue 29 of 34 There is no need to install BBC IPlayer App from App store. Just access BBC Iplayer link from web browsing tile and navigate to your favourite TV program via Apus browser. This will ensure best streaming quality. You can also use the BBC iplayer Kodi plugin for maximum flexibility.

****** Page 31 ****** Note: Software is provided “as is,” and in no event we warrant that the software is error free or that customer will be able to operate the software without problems or interruptions. Apps downloaded from App Stores or side loaded may be incompatible with this device. Certain apps may be specifically written for mobile devices and optimised for certain CPUs or they depend upon additional sensors or hardware not present within this device. Please be advised that we cannot guarantee that any downloaded and installed software will be compatible with this device even if it previous versions run well as the various software developers may change their code and requirements regularly. Playing certain games or apps may require additional USB or WIFI peripherals as keyboards, gyroscope remotes, game controllers etc. Warranty does not include software updates. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner’s benefit, without implying a violation of copyright law. Operating system provided with this smart TV is a fork of Android Open Source Project. SPECIFICATIONS ElQ-40FHDT2SM TV System Maximum Brightness Static Contrast Response Time Consumption Power Supply Connectivity Data Interface Supported System Files PAL DVB-T2 1920<1080 260 CD/m2 5000:1 6ms <75W ACIOO-240V – 50/60Hz Composite Video Input Component Video Input PC Video Input (VGA) PC Audio Input HDMI input x 2 RF Antenna Input Headphones Output Coaxial Output USBx3 FAT32 and FAT16 30 of 34 ****** Page 32 ****** Multimedia Playback Format Multimedia Categories File Extension Video Music Photo Text TS(*.ts,*.trp,*tp) / MKV(*.mkv) / *.flv / VC-I / WMV9(*.wmv,*.asf) / RMVB(*.rm,*.rmvb) *.mp3/AAC(*.aac,*m4a)/*.wav * .txt Remote Control Signal Type Control Distance Control Angle Power Supply ElQ-50FHDT2SM TV System Maximum Brightness Static Contrast Response Time Consumption Power Supply Connectivity Data Interface Supported System Files Infrared 8 meters 300 (Horizontal) AAA 1.5V x 2 PAL DVB-T2 300 CD/m2 5000:1 6ms <120W ACIOO-240V – 50/60Hz Composite Video Input Component Video Input PC Video Input (VGA) PC Audio Input HDMI input x 2 RF Antenna Input Headphones Output Coaxial Output USBx3 FAT32 and FAT16 31 of 34 ****** Page 33 ****** Multimedia Playback Format Multimedia Categories File Extension Video Music Photo Text *.avi/MPEG(*.mpeg,*.dat,*vob) / MPEG-4(*.mp4) / TS(*.ts,*.trp,*tp) / MKV(*.mkv) / *.flv / VC-I / WMV9(*.wmv,*.asf) / RMVB(*.rm,*.rmvb) *.mp3/AAC(*.aac,*m4a)/*.wav * .txt Remote Control Signal Type Control Distance Control Angle Power Supply ElQ-55FHDT2SM TV System Maximum Brightness Static Contrast Response Time Consumption Power Supply Connectivity Data Interface Supported System Files Infrared 8 meters 300 (Horizontal) AAA 1.5V x 2 PAL DVB-T2 320 CD/m2 5000:1 6ms <12W ACIOO-240V – 50/60Hz Composite Video Input Component Video Input PC Video Input (VGA) PC Audio Input HDMI input x 2 RF Antenna Input Headphones Output Coaxial Output USBx3 FAT32 and FAT16 32 of 34 ****** Page 34 ****** Multimedia Playback Format Multimedia Categories File Extension Video Music Photo Text *.avi/MPEG(*.mpeg,*.dat,*vob) / MPEG-4(*.mp4) / TS(*.ts,*.trp,*tp) / MKV(*.mkv) / *.flv / VC-I / WMV9(*.wmv,*.asf) / RMVB(*.rm,*.rmvb) *.mp3/AAC(*.aac,*m4a)/*.wav * .txt Remote Control Signal Type Control Distance Control Angle Power Supply TROUBLESHOTING Problem No power No picture Distorted or no sound Remote control not working Buttons on the TV don't do anything Poor picture or no picture Infrared 8 meters 300 (Horizontal) AAA 1.5V x 2 Solution Insert the power plug securely into the power outlet. Ensure that the equipment is connected properly. • Ensure the equipment is connected properly Ensure that the input setting for the TV and stereo system are correct. Adjust the master volume to a suitable volume by pressing V+/v- button. Check audio settings are correct. Check set isn't muted. Unplug headphones Check the antenna connection. Check the batteries are installed with the correct polarities. Replace the batteries with new, fully charged ones. Point directly at the remote sensor on the TV and try again. Operate at a distance of no more than 6m. Remove any obstacles between the remote control and the sensor. Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static, or other factors.) Adjust the indoor aerial, use an amplified aerial or external digital antenna. Have the DTV antenna checked or installed by a professional installer Move anything that may cause interference. Retry Auto tuning the unit. Try another channel. 33 of 34 ****** Page 35 ****** Noise or other interference Smart TV not working Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment. Perform factory reset electriQ UK SUPPORT Complete online support form on electriQ.co.uk/support Service Line: 0871 620 1057 Office hours: 9AM 5PM Monday to Friday electriQ.co.uk Unit 2, The Nursery Berristow Lane South Normanton Derbyshire, DE55 2FX PRODUCT DISPOSAL Do not dispose this product as unsorted waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres. 34 of 34

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



ELECTRIQ EIQ-50FHDT2SM (01) PDF MANUAL

Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.