Click here to download ELECTRIQ EIQ-25FHDO165FSGUC (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** electri(h USER MANUAL electru FHD LED MONITOR eiQ-25FHD0165FSGUC Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit to view our entire range of Intelligent Electricals

****** Page 2 ****** CONTENTS Safety Information What’s Included Monitor Dimensions Connections Available on the Monitor Wall Mounting Getting Started Monitor Controls Initial Setup Menu Options Brightness Image Settings Colour Temperature Settings OSD Settings Reset Miscellaneous Settings Specification Troubleshooting electriQ UK Support 1 2 4 4 5 6 6 6 7 7 8 9 10 11 12 13 14 15 15

****** Page 3 ****** SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions The safety and operating instructions should be retained for future reference. Heed all warnings -L All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and usage instructions should be followed. Do not use this equipment near water, or in humid environments The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. Clean only with a dry cloth. Do not use solvents or petroleum based fluids. Do not block any ventilation openings. Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat. Do not tamper with the supplied plug. This plug is a BS1363 standard plug. Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped. Please keep the unit in a well-ventilated environment. The monitor should only be connected to a mains power supply as rated on the back of the equipment. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on the cable as this may cause damage. When removing from a socket hold by the plug and not the wires. Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally. Do not remove the safety covers. There are no user serviceable parts inside. 2

****** Page 4 ****** Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components. Due to our continuous product development, the operation and or features of the product received may vary slightly from the information provided within the manual. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible. WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire. AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING. CAUTION: To reduce the risk of This warning sign is to warn of dangerous voltage inside the product. electric shock, DO NOT remove the cover (or back). NO user serviceable parts inside. Refer servicing to qualified service person nel- 3 This warning sign is to alert you Of important instructions accompanying the product.

****** Page 5 ****** WHAT’S INCLUDED electrici usER ceo user manual 31 Power supply Power cable HDMI

****** Page 6 ****** CONNECTIONS AVAILABLE ON THE MONITOR 6 O 7 1 HDMI 2 3 Type-C 4 USB 5 AUDIO USB DC12V OUT 1. 2. 3. 4. 5. 6. HDMI port Display Port Type-C USB USB Audio out port DC12V Used to connect a compatible device. Supports HDMI 1.4 & 2.0 ; Used to connect a compatible device. Supports Display Port 1.2 Supports data transmission, external charging and image display. Used for connecting compatible USB devices Used for connecting compatible USB devices Used for connecting headphones or external speakers Power. 5

****** Page 7 ****** WALL MOUNTING The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied) The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied) Do not use screws longer than specified or damage will occur to the internal components. NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation. GETTING STARTED MONITOR CONTROLS EXIT Source Menu MENU POWER EXIT MENU POWER Within OSD: Go back to previous menu / exit the on screen display Decrease the volume. Within OSD: Move down/left Increase the volume. Within OSD: Move up/right Enter the OSD menu Within OSD: Select the highlighted option. Turn the monitor on and off. 6

****** Page 8 ****** INITIAL SETUP Connect the monitor to a power outlet. 1. 2. 3. Press the POWER button on the monitor or to turn it on (The indicator will be blue) Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected. To change between inputs, press the EXIT button to enter the source menu. Use the and buttons to choose the input source between Type C, DP and HDMI. TYPE C HDMI MENU OPTIONS The menu for the monitor can be accessed by pressing the MENU button on the control panel. This menu is separated into the following sub menus: Brightness, Image, Colour Temperature, OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following section. Please Note: Some settings may not be adjustable in which case they will be grayed out. This could be due to the input source or other options chosen within the menus. 7

****** Page 9 ****** BRIGHTNESS BRIGHTNESS BRIGHTNESS BRIGHTNESS CONTRAST ECO DCR HDR MODE 50 STANDARD OFF OFF Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100” CONTRAST Allows the adjustment of the contrast between white and black areas of the image. Value “0-100″ ECO Allows selection of image settings between the following: STANDARD, TEXT, MOVIE, GAME, FPS, and RTS”. DCR Allows the dynamic contrast of the picture to be turned ON and OFF I-IDR MODE Allows to change the value between “OFF, AUTO, 2084 8

****** Page 10 ****** IMAGE SETTINGS H . poslTlON V . POSITION CLOCK PHASE ASPECT H. POSITION IMAGE 50 51 52 53 16: 9 Allows adjustment of the horizontal position of the display image. Press the <and buttons to horizontally move the image. V.POSITION Allows adjustment of the vertical position of the display image. Press the < and buttons to vertically move the image. CLOCK Allows adjustment of the CLOCK setting. Value "0-100" PHASE Can reduce video distortion and instability. Value"0-100" ASPECT Allows selection of video format of the between "16:9, 4:3 " 9 ****** Page 11 ****** COLOUR TEMPERATURE SETTINGS COLOR TEMP COLOR TEMP . GREEN BLUE WARM 45 48 48 OSD COLOR TEMP. Allows adjustment of the colour settings between the following options: "Normal — Warm – Cool – User". When set to "User", you have full control to alter the individual settings Red : 0-100, Green: 0-100, and Blue : 0-100. RED Allows adjustment of the red element of the image GREEN Allows adjustment of the green element of the image BLUE Allows adjustment of the blue element of the image 10 ****** Page 12 ****** OSD (ON SCREEN DISPLAY) SETTING OSD SETTING LANGUAGE OSD H. POS. OSD V. POS. OSD TIMER TRANSPARENCY 50 50 OSD LANGUAGE Allows selection of desired language: "ENGLISH, FRENCH, TURKISH, ITALIAN, SPANISH, PORTUGUESE, CHINESE, DUTCH, JAPANESE, GERMAN, POLISH, AND KOREAN." OSD H. POS Allows adjustment of the horizontal position of the OSD OSD V. POS Allows adjustment of the vertical position of the OSD OSD TIMER Allows adjustment of the duration of the OSD, value "5-60" TRANSPARENCY Allows adjustment of the transparency of the OSD, value "0-100" 11 ****** Page 13 ****** RESET OSD RESET RESET IMAGE AUTO ADJUST COLOR AUTO ADJUST RESET OD OFF Returns the monitor to its factory default settings. OD (Overdrive) Allows the monitor to force a faster response time when activated (165Hz). 12 ****** Page 14 ****** MISCELLANEOUS OSD SIGNAL SOURCE Misc SIGNAL SOURCE LOW BLUE LIGHT VOLUME FREESYNC OFF 60Hz Allows user to choose the signal source of the display "HDMI, C". VOLUME Allows adjustment of the volume of the monitor from "0-100". LOW BLUE LIGHT Allows adjustment of the low blue effect of the display, value FREE SYNC Allows FreeSync to be turned ON and OFF. 13 50 DP and Type o-25-50-75-100. ****** Page 15 ****** SPECIFICATION Panel Type Panel Dimensions Case Type Best Resolution Active Display Area Pixel Pitch Contrast Ratio Brightness Response Time Viewing Angle Display Colours Adjustable Colour Temperature Video Compatibility Aspect Ratio Speaker Multimedia Speakers Sound Demodulation Mute Operating Humidity Operating Temperature Video Interface Audio Interface eiQ-25FHD0165FSGUC Safety & EMC Certification Stand Type Button Position POWER Input Power Consumption 25" (16:9) LED Backlit Monitor 623mm Diagonal Plastic 1920(H) x 1080(V) @ 144Hz (165Hz Overdrive) 543.744(H) X 302.616 (V) 283.2 x 280.2 1000:1 Typical 400 cd/m2 5ms(GTG) 1760/1700 CR210 1.07G WARM/ COOL [USER Mufti-Standard for NTSC / PAL 16: 9 Stereo. Audio Yes 20 0/0-70 % – 10 to 50 oc INIOUT INTERFACE HDMI 2.0 x 1, DP 1.2 x Audio Out x 1 CE / FCC / ROHS Desktop Right Hand Side DC 12V 3A 36W ****** Page 16 ****** TROUBLESHOOTING Problem No power No picture Solution Insert the plug securely into the power outlet. Ensure that the equipment is connected properly. Ensure the correct input is selected. Buttons on the monitor don't Disconnect the power plug and then reconnect it. do anything (The unit may not be operating properly due to lightning, static, or other factors.) Noise or other interference Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment. ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. electriQ UK SUPPORT If the unit fails to operate call: 0871 620 1057 or complete the online form Office hours: 9AM – 5PM Monday to Friday Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA 15








Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.