Click here to download ELECTRIQ EIQ-27CVQHD165IFSGHLD (01) PDF MANUAL
PDF Content Summary:
****** Page 1 ****** electrica USER MANUAL electriu 27″ LED MONITOR eiQ-27CVQHD1651FSGHLD Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit electriQ.co.uk to view our entire range of Intelligent Electricals
****** Page 2 ****** CONTENTS SAFETY WHATS INCLUDED STAND INSTALLATION WALL MOUNTING CONNECTIONS GETTING STARTED MONITOR CONTROLS SHORTCUT BUTTONS MENU OPTIONS OSD MENU LED EFFECTS PICTURE MODE COLLIMATION MODE INPUT BRIGHTNESS/CONTRAST COLOUR PICTURE QUALITY DISPLAY AUDIO MULTI-WINDOW OSD OTHER TECHNICAL SPECIFICATION TROUBLESHOOTING SUPPORT 2 3 5 6 7 8 9 9 9 10 10 10 10 11 11 12 12 13 13 14 15 15 16 17 17
****** Page 3 ****** SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and usage instructions should be followed. Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. Clean only with a dry cloth. Do not use solvents or petroleum-based fluids. Do not block any ventilation openings. Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat. Do not tamper with the supplied plug. This plug is a BS1363 standard plug. Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance. Only use attachments/accessories specified by the manufacturer. • Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped. Please keep the unit in a well-ventilated environment. The monitor should only be connected to a mains power supply as rated on the back of the equipment. To prevent overload, do not share the same power supply socket with too many other electronic components. Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on the cable as this may cause damage. When removing from a socket hold by the plug and not the wires. Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally. Do not remove the safety covers. There are no user serviceable parts 3
****** Page 4 ****** inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible. WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire. Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible. The availability of features and settings may vary depending on the input source and method of connection. Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible. The availability of features and settings may vary depending on the input source and method of connection. The available resolutions and refresh rates may be limited by the capabilities and/or settings of the source device. AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING. This warning sign is to warn of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN CAUTION: To reduce the risk of electric shock, DO NOT remove the cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. 4 This warning sign is to alert you of important instructions accompanying the product.
****** Page 5 ****** WHAT’S INCLUDED MONITOR DP CABLE MOUNTING PLATE STAND BASE HDMI HDMI TYPE-C CABLE electric& L:’ »:urw. USER MANUAL 5 CM4 X 23 SCREW BOLTS POWER SUPPLY STAND (UPRIGHT SECTION)
****** Page 6 ****** STAND INSTALLATION I. 2. 3. 4. Open the packing box, take out the bracket and the base, and use one bolt (the bolt can be found at the base) to attach the base of the stand to the upright secton, as shown below: Mounting Plate Bolts x 1 Attach the stand onto the rear of the monitor by locating the top of the upright section into position on the rear of the monitor before clipping in the bottom of the mounting plate. Ensure the mounting plate is fully located. Quick release button Use one Bolts (B) to secure the mounting plate to the rear of the monitor. Use both hands to stand the assembled monitor on a flat desktop. NOTES: • Due to the heavy weight and dimensions of the LCD screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people. • electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases any guarantee will expire. The stand can be removed from the rear of the monitor by pressing the quick release button on the rear of the monitor. 6
****** Page 7 ****** WALL MOUNT INSTALLATION 1. 2. 3. As shown in the figure above, use a screwdriver to remove the four screws locked in the middle of the whole machine (when disassembling the screws, the display screen cannot leave the polyol foam to prevent the screen from breaking) Disassemble the four screws thet lock the whole machine Take out the wall-mounted adapter/four CM4*23 screws from the accessories as shown in the figure above, assemble it in the middle of the whole machine, and fix it by locking. Wall adapter CM4*23 screw The wall-mounted adepter is assembled to the middle of the whole machine (fixed with CM4*23 screws in the accessory bag) Do not pinch the screen directly with your hands during the process of hanging the product to prevent the screen from breaking. wall Wall adapter Wall bracket 7
****** Page 8 ****** NOTES: • Do not pinch the screen directly with your hand when hanging the product to prevent the screen from breaking. • Due to the heavy weight and dimensions of LCD screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people and professional installers are used to wall mount them (Wall mounting is optional). • If you do not understand the instructions, or are unsure how to install this product, please contact a professional for assembly advice and assistance. Careful consideration should be made regarding the location the monitor is to be wall mounted as some walls are not suitable for installation. If the monitor is to be mounted on drywall, the mount must be anchored into a wooden stud, concrete block or brick behind the drywall. Installing on drywall alone may not support the weight of the display. When drilling holes, it is particularly important to take care of electrical cables, water or gas pipes in the wall. Please follow the instructions provided by the wall bracket manufacturer and ensure that all fixing screws supplied are used. • electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases any guarantee will expire. CONNECTIONS AVAILABLE ON THE MONITOR 1. POWER 2. HDMI x 3 (HDMI 2.0, QHD 144Hz, FreeSync) 3. DP IN (Display Port 1.4, QI-ID 165Hz, FreeSync) 4. Type-C (QHD 60Hz) 5. AUDIO OUT 6. USB 1 2 3 4 56 WALL MOUNTING • The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied). • The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied) • Do not use screws longer than specified or damage will occur to the internal components. NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation. 8
****** Page 9 ****** GETTING STARTED MONITOR CONTROLS • • Select signal source or Exit the menu Go Up within the Main Menu or increase the value of the selected item Go Down within the Main Menu or decrease the value of the selected item Enter the Main OSD Menu and Select submenu Turn the monitor On or Off SHORTCUT BUTTONS The monitor includes one touch options to access common settings. Display Crosshairs Scene Mode Switching Power On Or Off Main Menu LED Effects 9
****** Page 10 ****** INITIAL SET UP Connect the monitor to a power socket. 1. Press the POWER button on the monitor or to turn it on (The indicator will be blue) 2. Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected. 3. To change between inputs, press the E button to enter the source menu. Use the and buttons to choose the input source between DPI, HDMII, HDM12 and DP2. MENU OPTIONS The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub menus: Input source, Brightness/Contrast, Colour Settings, Picture Quality Settings, Display, Audio, OSD (On screen display), and other. Details of each menu can be found in the following section. OSD MENU LED EFFECTS SYSTEM CONSOLE LED Effects System Console Logo Led Strip Led OFF PICTURE Mode Color Strength Mode Strandard White HightLight Normal Switch the scene mode shortcut button you can change the picture mode Picture mode directly: Standard, Photo, Movie, Game, FPS and RTS. 10
****** Page 11 ****** COLLIMATION Mode Used to choose the Crosshairs that can be displayed in the centre of the screen. Ilimation Mod Point Collimation 1 Point Collimation2 Cross Collimation 1 Cross Collimation2 INPUT SOURCE HDM12 Input Source Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-Window OSD Other IVindaw1 IrvutSource: ‘–0.”2 Resolution: 2560×1440@60Hz SDR Type-c HDMII • HDM12 HDM13 W’ ndrnv2: Switch the signal input or select the source. Type-C, DP, HDMII, Signal HDM12, HDM13 11
****** Page 12 ****** BRIGHTNESS/CONTRAST DMI Input Source BrighmesstContrast Color Setting Picture Qualty Setting D*ay Audio Wti•WTldmv OSD Ot,er InputSouræ: HOM12 256011440@60Hz Brightness Blacklevel Contrast DCR Light Sensor ‘Window2T InputSource; Resolution : Resolution: 2560×1440@60Hz SDR 90 50 50 Brightness Black level Contrast DCR Adjust the brightness of the display between O and 100. Adjust the black level of the display between O and 100. Adjust the contrast of the display between O and 100. Turn the Dynamic Contrast Ratio Feature On or Off. Light Sensor Turn the Light Sensor Feature On or Off. COLOUR SETTINGS HDM12 Input Source Brightness/Contrast Color Setting Picture Quality Settlng Display Audio Multi-wndow OSD Other l’.’indowl InputS•urce: HOM 12 Resolution: Gamma Picture Mode Color Temperature Low Blue Light Hue Saturation RGB Range Window2: InputSouræ Resolution Resolution: 2560×1440@60Hz SDR 2.2 Standard Gamma Picture Mode Colour Temperature Low Blue Light Hue Saturation RGB Range Change the Gamma value for the display between 1.8, 2.0, 2.2, 2.4, 2.6 Change the picture mode between Standard, Photo, Movie, Game, FPS and RTS. Change the Colour Temperature of the display to Normal, Warm, Cool or User. When the User Mode is selected, the Red, Green, and Blue values can be adjusted independently between O and 100. Change the blue light emitted by the display betweenO and 100. Change the Hue value between O and 100. Change the Saturation of the display between O and 100. Change the RGB Range the display full and Limit. 12
****** Page 13 ****** PICTURE QUALITY SETTINGS HDM12 Input Source Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-Window OSD Other ‘VVirdow1 InputSource: HDM12 Resolution: 2560×1440@60Hz Sharpness Response Time Noise Reduction Dynamic Luminous Control MPRT Window2. InputSource : Resolutim: Resolution: 2560×1440@60Hz SDR 50 Off Off Off Off Sharpness Response Time Noise Reduction Dynamic Luminance Control MPRT DISPLAY HDM12 Input Souræ Change the display Sharpness between O and 100. Turn the Response Over Drive feature between Off, High, Middle of low Adjust the level of Noise Reduction between Low, Medium, High, or Off. Turn the Dynamic Luminance Control feature On or Off. Turn the motion blur on or off. Resolution: 2560×1440@60Hz SDR Wide Screen Brightness/Contrast Color Setting Pldure Quality Setting Display Multi-Window OSO Other ‘.’.’indrnl . InputSouræ: HDM12 Aspect Ratio Aspect Ratio InputSouræ Change the image aspect ratio to Wide Screen. 4:3, Auto, 1:1, 13
****** Page 14 ****** AUDIO HDM12 Input Source Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-fflndow OSD Windcwl • InwtSwæ: 1–0M12 Mute Volume Audio Source Mute Volume Audio Source I’Vindow2: IrvutSouræ: Renlutzn ; Resolution: 2560×1440@60Hz SDR Off AutoSource Turn On and off to mute and unmute the audio output. Adjust the output volume between O and 100. Chose which source the audio is output from Type-C, DP, HDMII, HDM12, HDM13, AutoSource MULTI-WINDOW HDM12 Input Source Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-Window OSD Other ‘CVindo•.v1 InputSource: HDM12 Resolution: 2560×1440@60Hz Multi-Window Sub Win2 Input PIP Size PIP position Swap Window? InputSource Resolution: Resolution: 2560×1440@SOHz SDR Medium TopRight Choose the different formats of multi window display between Off, Multi-Window Picture in Picture (PIP) and Picture By Picture (PBP 2Win) Choose the source of the second window between DP, Type-C, HDMII, Sub Win2 Input PIP Size PIP Position SWAP HDM12, HDM13 Adjust the size of the secondary source in PIP and PBP modes between Small, Medium and Large Set the position of the secondary source in PIP and PBP modes between Top Right, Top Left, Bottom Right and Bottom Left. Swap the Primary and Secondary inputs on screen.
****** Page 15 ****** OSD HDM12 Input Source Brighmess/Contrast Color Setting Picture Quality Seting Display Audio Multi-Wlndow OSD Other Windowl : InputSource: HOM12 Resolution: 2560×1440@60Hz Language OSD H-Position OSD V.Position OSD Transparency OSD Tme Out OSD Rotation Window2: InputSource: Resolution : Resolution: 2560×1440@SOHz SDR English 50 50 20 100 Normal Language OSD H Position OSD V Position OSD Transparency OSD Time Out OSD Rotation OTHER HDMII Input Source Change the OSD Menu display language between English, Chinese, Korean, Russian, Spanish, Japanese and French. Change the horizontal position of the OSD Menu between O and 100. Change the vertical position of the OSD Menu between O and 100. Change the transparency value of the OSD Menu between O and 100. Change how long the OSD Menu is on before it automatically exits. Change the OSD Rotation Normal,90,180,270 Brightness/Contrast Color Setting Picture Quality Setting Display Audio Multi-Wvndow OSD Other Windowl : InputSource: HDM12 Resolution 2560×1440@60Hz DP Version DP Version FreeSync(Adaptive Sync) HOR Trun on Type-C Function USB Update FW Reset Window? InputSource: Resolution Resolution: 2560×1440@€OHz SDR DPI.2 Off Off On FreeSync (Adaptive Sync) HDR Trun on Type-C Function USB Update FW Reset Chan e the DP version Turn Free Sync On or Off. Turn the HDR on or off. Turn the Type-C Function on or off. Use for update software Restore factory default setting. 15
****** Page 16 ****** SPECIFICATION Product Model Screen Size Panel Type Aspect Ratio Power Supply Power Consumption Dimensions Net / Gross Weight eiQ-27CVQHD1651FSGHLD 27″ Diagonal VA Panel 16:9 DC 180W 19.5V 9.23A 80W Typ, 175W Max 615.8 * 122.39 * 371.9 mm 5.18 kg / 8.4 kg 2560 * 1440 1000 cd/m2 (HDR)/ 650 cd/m2 3 Maximum Resolution Brightness Static Contrast Response Time Viewing Angle (HIV) USB Input HDMI Input Display Port Input Audio Output Working Temperature Working Humidity Speaker Specifications 3000:1 lms 1780 / 1780 USB- type c x 1 HDMI 2.0 x3 DP 1.4 xl xl ooc – 400C 85% Non-condensing 4R2Wx2 10% – 16
****** Page 17 ****** TROUBLESHOOTING PROBLEM No power No picture Buttons on the monitor don’t do anything Noise or other interference SOLUTION Insert the plusecurely into the power outlet. Ensure that the equipment is connected properly. Ensure the correct input is selected. Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static, or other factors.) Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment. ENVIRONMENTAL PROTECTION Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers. electriQ UK SUPPORT electriQ.co.uk/support call: 0330 390 3061 Office hours: 9AM – 5PM Monday to Friday electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA 17
****** Page 18 ****** 108.007.12961 27A5 140*197mm VOI eiQ-27CVQH016SlFSGHLO ElectriQ IA 2020.11.20 V@5SiT Clffi
FREE ENGLISH PDF
OPERATING INSTRUCTIONS
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL