Click here to download ELECTRIQ EIQ-15FHDPM-V2 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** USER MANUAL 15.8 INCH PORTABLE DISPLAY eiQ-15FHDPM-V2 Thank you for choosing electriQ Please read this user manual before using this portable display and keep it safe for future reference

****** Page 2 ****** CONTENTS SAFETY PRODUCT OVERVIEW OPERATION MAIN MENU CONNECTING A DEVICE TROUBLESHOOTING TECHNICAL INFORMATION SUPPORT CLEANING AND MAINTENANCE 2 3 4 5 5 7 9 10 11 11

****** Page 3 ****** SAFETY INSTRUCTIONS • Read these instructions — All the safety and operating instructions should be read before this product is operated. • Keep these instructions — The manual should be retained for future reference. Heed all warnings — All warnings on the appliance and in the operating instructions should be adhered to Do not use this equipment near water The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. Clean only with a dry cloth. Do not use solvents or petroleum-based fluids. Only use attachments/accessories specified by the manufacturer. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as when liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped. Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus. 3

****** Page 4 ****** PRODUCT OVERVIEW 1920 1080 15.8 Inch 368MM Speaker HDMI Input Main USB Type C Input (Power and Video ) 3.5 mm Headphone Socket 4 Speaker Secondary USB Type C (Power Only) Rocker Switch Power/ Return button

****** Page 5 ****** OPERATION Press and hold the power button for 3 seconds to turn the monitor ON and OFF. The screen will enter power saving mode when turned on unless there is a suitable device connected. The ROCKER SWITCH is used to increase or decrease the volume and adjust the brightness. Roll the switch up or down to adjust the settings. To change between brightness and volume press the switch. MAIN MENU The portable display also includes a full settings menu which is navigated using the rocker switch. Press and hold the rocker switch for over 3 seconds to enter the Menu. When inside the menu press the rocker switch up and down to highlight the desired option, and press the rocker switch to select it. BRIGHTNESS BRIGHTNESS CONTRAST BLACK LEVEL SHARPNESS IMAGE ECO Can be changed between STANDARD, RTS, FPS, TEXT, MOVIE and GAME. DCR (Dynamic Contrast) — Can be turned on and off. ASPECT Can change the aspect ratio between Wide and 4:3. 50 80 50 BRIGHTNESS All options can be adjusted between 0 and 100. IMAGE ECO DCR ASPECT STANDARD OFF WIDE DSD 5

****** Page 6 ****** WARM 50 50 50 OSD OSD COLOR TEMP COLOR TEMP . GREEN BLUE OSD SETTING LANGUAGE — Change the language of the Menus. COLOR TEMP COLOUR TEMP Change between USER, WARM and COOL. In USER the individual RED, GREEN and BLUE values can be adjusted. OSD SETTING LANGUAGE OSD TIMER TRANSPARENCY OSD TIMER — Adjust the amount of time the menu is shown before the display returns to normal operation. TRANSPARANCY — Adjust how see through the menus are. oso RESET RESET MUTE VOLUME MISC OFF RESET RESET Return the portable display to factory settings. MUTE Turn the sound On or Off Volume — Adjust the volume level between O and 100. MISC SIGNAL SOURCE Change the signal source between USB Type C and HDMI. LOW BLUE LIGHT – Adjust the filtering of blue light from the screen. I-IDR MODE (High Dynamic Range) – Change the HDR mode settings. 6 SIGNAL SOURCE LOW BLUE LIGHT HOR MODE ntPEC 2084

****** Page 7 ****** CONNECTING A DEVICE COMPUTER VIA USB TYPE C DISPLAY Type C To Type C COMPUTER The portable display can be connected to a compatible computer using the supplied USB C cable. This must be connected to the Main USB socket on the left of the display. The computer will provide power and signal to the monitor and can be used for extended display or duplicated display use. COMPUTER – VIA HDMI HDT0 Mini HD COMPUTER USBAT0 Type C DISPLAY External power supply(suitable the insufficient power supplier ) When connecting to a compatible computer using the HDMI interface, you need to connect the supplied HDMI cable between the computer and the display. You should also connect the display to the computer via USB, using a USB to USB Type C cable (Not supplied), connected to the left-hand Main USB Type C socket on the left of the display. Depending on the power supplied by the USB port on the computer (Display required 5V/2A), additional power may need to be supplied to the monitor through the secondary Type C socket on the right of the portable display. 7

****** Page 8 ****** MOBILE PHONE – VIA USB TYPE C MOBILE DISPLAY PHONE Type C To Type C EXTERNAL SVPPLY OF OR MORE When there is no external power supply connected to the secondary USB Type C socket on the right of the display, the mobile phone battery will supply power to the display. To reduce power usage the energy-saving mode will be activated and the display brightness will be reduced to 30%, and the user can adjust the brightness and volume of the display according to the output power of the mobile phone). When connected to an external power supply through the secondary Type C port, the display will provide power to the mobile phone through the external power supply. (To ensure that the display and the mobile phone can get enough working current, please use a 16W charger or power bank as the external power supply. See “Parameters” for information on compatible phone brands. OTHER DEVICES MINI toHD External Miwer supply of .5V/2A or more MINI HD to HD Type C to USB A Extemnl power supply(suitable the insufficient USB power supplier ) When connecting a device using HDMI, be sure to connect the power cable first, then connect the HDMI to ensure the smooth transmission of the signal. 8

****** Page 9 ****** TROUBLESHOOTING PROBLEM No video/ picture (led not lit) No video/ power/ picture (led lit) Missing pixels/ spots and light leaks on the screen Display fails when switching Picture is missing colours Screen image is too small Osd does not appear on the screen No picture, indicator light is blue The picture does not fill the entire screen. SOLUTION • Make sure the video cable between the monitor and computer is connected properly and securely. • Use other electrical equipment to confirm that the power outlet is working properly. • Make sure the power button is pressed correctly. • Make sure the correct input source is selected throu h the in ut source menu. • Improve brightness and contrast with OSD. • Check whether the indicators on the side are normal. • Check if the video cable connector pins are bent or broken. • Check whether the power adapter is properly connected. • Make sure the correct input source is selected through the in ut source menu. • Turn off and on again. • Restore the monitor to factory settings. • Use OSD to adjust brightness and contrast. • Pixels that are permanently off are an inherent defect in LCD technology. • Contact us about monitor ualit and ixel issues. • Make sure that the video cables of the monitor and HDMI output device are properly connected. • Reset the monitor to facto settin s. • Make sure the video cable connecting the monitor and the computer is properly connected. • Adjust custom r/ g / b values. Colour in the colour menu of OSD. • In the advanced settings OSD, change the input color format to PCRGB or YPbPr. • Check the aspect ratio setting in the monitor settings OSD • Restore the monitor to facto settin s. • Turn off the monitor, disconnect and reconnect the ower cord, and turn on the monitor. • Check the signal source. Make sure the computer or phone is not in sleep mode. • Check that the signal cable is properly inserted. Reconnect the signal cable if necessary. • Restart our computer or hone. • Since the resolution of the same screen of the mobile phone can be re-scaled (aspect ratio), the display can be displayed in full screen. • Computer equipment can be set to 16: 9 resolution, the display can be full screen display • Play a video source with a 16: 9 video sources, and the monitor can dis Ia full screen. 9

****** Page 10 ****** Product t e: Visual area: Panel type: Aspect ratio: Display color: Visual angle: Contrast ratio: Color amut: Input interface: Output Interface: System requirement: TECHNICAL INFORMATION P2(k P 20 Portable Dis la 349.63 H *196.67mm IPS 16:9 16.7M H: 850/850Min 800: 1 720/0 Model No: Screen Size: Dimension: Resolution: Colour temperature: V: 850/850Min Brightness: eiQ-15FHDPM-V2 15.8 inch 368 * 225 * 9.0 mm 1920*1080 6800K 200-220 cd/m2 Mini HDMI (Video signal) Type C (Video Power supply ISDN) Type C power supply 3.5mm interface headphone Speaker: Built-in cavity speaker (IW*2) devices with an HD output interface, computers with full Type C video output capability; SUPPORTED MODELS (Phone) Brand Mate ICR Huawei Samsung Smartisan Phone model Mate IOPrm Mate 2m Mate 20Prm Mate 20k Prcn HonorNote10 sm sm Note Note 9 Pr02S R17 Pro oppo More models Updated continuously SUPPORTED MODELS (Computer) Brand Huawei Apple Honor Lenovo Dell Google ASUS Microsoft Razer More models Computer model MateBool« MateBook MateBook X Prm MateBook E MacBook 1 m MacBook Prcn MacBook Ain iPad Pro 2018 Magic Air 12.5/13.3 Pro 15.6-incl-n Millet Game Book Yoga 5Prm ThinkPad Xl Carbon Miix 720 Pavilion xm EliteBook Folio Gl XPSI& XPS15 Chromebook PixelBook Pen Lingyaom 1330m IJ321 I-J410m ROG series Surface Book2 Blade Stealth blade/blade sneak version Updated continuously. .. 10

****** Page 11 ****** CLEANING AND MAINTENANCE Before cleaning the monitor, unplug the monitor power cord from the electrical outlet • When cleaning the antistatic screen, slightly moisten a clean, soft cloth with water. If possible, use a dedicated screen-cleaning tissue or solvent for electrostatic coating. • Do not use benzene, thinner, ammonia, abrasives, or compressed air. • If you find white powder when you unpack your monitor, wipe it off with a cloth. • Be careful when operating the monitor, as dark monitors are easier to scratch and leave visible scratches than light monitors. electriQ UK SUPPORT electriQ.co.uk/support Call: 0330 390 3061 Office hours: 9AM – 5PM Monday to Friday electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers. 11

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL



ELECTRIQ EIQ-15FHDPM-V2 (01) PDF MANUAL

Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.