FREE ENGLISH DUPLO DF-999A (02) PDF DOCUMENT.
FREE ENGLISH DUPLO DF-999A (02) PDF USER GUIDE.
FREE ENGLISH DUPLO DF-999A (02) PDF USER MANUAL.
FREE ENGLISH DUPLO DF-999A (02) PDF OWNER GUIDE.
FREE ENGLISH DUPLO DF-999A (02) PDF OWNER MANUAL.
FREE ENGLISH DUPLO DF-999A (02) PDF REFERENCE GUIDE.
FREE ENGLISH DUPLO DF-999A (02) PDF INSTRUCTION GUIDE.
FREE ENGLISH DUPLO DF-999A (02) PDF REFERENCE MANUAL.
FREE ENGLISH DUPLO DF-999A (02) PDF INSTRUCTION MANUAL.
FREE ENGLISH DUPLO DF-999A (02) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD DUPLO DF-999A (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What precautions should be taken before installing the DUPLO DF-999A?
Before beginning the installation of your DUPLO DF-999A, please adhere to the following precautions:
• Check that the power switch [A] is turned off.
• Verify that the voltage and frequency of the area where the machine will be used match the specifications on the label [B] attached to the machine.
• When removing the machine from its container, it should be lifted from the bottom [C] by two people.
What are the weight and installation space requirements for the DUPLO DF-999A?
The weight of the DUPLO DF-999A is as follows:
• Total Weight: 43.0 kg / 94.8 lb
• Main Unit: 41.6 kg / 91.8 lb
• Accessories: 1.0 kg / 2.2 lb
The required installation space (width x depth x height) is: 1,112 x 512 x 554 mm / 43.78 x 20.16 x 21.82 inches.
Where should the DUPLO DF-999A be installed?
Install the DUPLO DF-999A on strong, solid ground that can bear the weight of the machine. The machine should be placed in a flat and stable location. Do not install this machine near a heating source such as a stove. The installation site must meet the following requirements:
• Temperature range: 5 to 35°C, 41 to 95°F
• Humidity range: 20 to 80%RH (No condensation)
• No direct sunlight
• Outside light does not exceed 1,500 lx
• Little dust and dirt
• Little vibrations
• No salt
• No special chemicals
• No exposure to water
What are the power supply requirements for the DUPLO DF-999A?
Ensure the power supply used for the DUPLO DF-999A is always within the following range:
• Power supply: 100 to 240 V, 50/60 Hz
• Rated power: 100 W
• Rated current: 1.0 A to 0.5 A
When you power other appliances from the same wall outlet, make sure that the combined power consumption does not exceed the power supply capacity.
What accessories are included with the DUPLO DF-999A?
| No. | Name | Qty. DF-999/DF-999A | Remarks |
|---|---|---|---|
| [u1] | Cross fold lever | 1 | |
| [u2] | Auxiliary paper ejection guide | 1 | |
| [u3] | Folding plate 1 | 1 | |
| [u4] | Folding plate 2 | 1 | |
| [u5] | Paper support guide | 1 | |
| [u6] | T-handle hexagonal wrench | 1 | For User (tool) |
| [u7] | Scale label | 1 | |
| [u8] | Power cord | 1 | For EU |
| [u9] | Power cord | 1 | For NA |
| [m1] | Instruction manual | 1 | |
| [m2] | Safety Guide A | 1 | |
| [m3] | DECLARATION OF CONFORMITY | 1 | For EU |
| [m4] | WEEE Statement | 1 | For EU |
| [m5] | Statement of Electromagnetic Compatibility (EMC) | 1 | For NA |
| [m6] | Installation manual | 1 | This manual |
How do I prepare the DUPLO DF-999A for installation?
The press release levers have been installed to avoid the deformation of the folding roller and must be removed before operation. Be sure to remove the press release levers when installing.
Important: If the folding plate 1 is set before removing the press release lever, the folding plate 1 may become deformed or damaged. Be sure not to turn on the power before removing the press release lever.
Follow these steps:
1. Open the top cover [A].
2. Remove the tapes [B] that secure the press release lever.
3. Remove the press release lever 1 [C] in the direction of the arrow.
4. Remove the press release lever 2 [D] in the direction of the arrow with the same method as step 3.
5. Close the top cover opened in step 1.
CLICK HERE TO DOWNLOAD DUPLO DF-999A (02) PDF DOCUMENT