DORO 6041 (01) PDF MANUAL

FREE ENGLISH DORO 6041 (01) PDF USER GUIDE

FREE ENGLISH DORO 6041 (01) PDF USER MANUAL

FREE ENGLISH DORO 6041 (01) PDF OWNER GUIDE

FREE ENGLISH DORO 6041 (01) PDF OWNER MANUAL

FREE ENGLISH DORO 6041 (01) PDF REFERENCE GUIDE

FREE ENGLISH DORO 6041 (01) PDF INSTRUCTION GUIDE

FREE ENGLISH DORO 6041 (01) PDF REFERENCE MANUAL

FREE ENGLISH DORO 6041 (01) PDF INSTRUCTION MANUAL

FREE ENGLISH DORO 6041 (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD DORO 6041 (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

DORO 6041 (01) PDF SUMMARY:

What items might be supplied with the phone?

The items supplied with the phone might vary depending on the software and accessories available in your region or offered by your service provider. You can obtain additional accessories from your local Doro dealer. The supplied accessories provide the best performance with your phone.

What are the components of the phone?

  • Earpiece
  • Display
  • Left selection button
  • Call button
  • Top 10 shortcut
  • Voice mail
  • * International prefix/ Symbols
  • Microphone
  • # Input method/Silent
  • Camera shortcut
  • Message shortcut
  • End call / Power on/off
  • Arrow buttons
  • Right selection button
  • Camera flash/torch
  • Red light = Battery level low/ Charging
  • Green light = New message/ Missed call
  • Camera lens
  • Headset socket
  • Charging socket
  • Assistance button
  • Loudspeaker
  • Volume control
  • Lanyard hold (lanyard optional)
  • Charging stand (optional)

How do you insert the SIM card, memory card, and battery?

  1. Remove the battery cover.
  2. Remove the battery if it is already installed.
  3. Locate the SIM card holder and gently slide the card into the holder. See the label right next to the holder for guidance on how to insert the card.
    • Insert the first SIM card by gently sliding it into the SIM1 card slot.
    • Insert the second SIM card by gently sliding it into the SIM2 card slot.
  4. Locate the SD card holder and follow the instructions for the SIM card to insert the memory card.
  5. Insert the battery by sliding it into the battery compartment with the contacts facing downwards to the right.
  6. Replace the battery cover.

What type of SIM card does this device accept?

This device accepts micro SIM or 3FF SIM cards.

What type of memory cards are compatible with this device?

Compatible card types are microSD and microSDHC.

How do you charge the phone?

  1. Connect the mains adapter to a wall socket and to the charging socket.
  2. The battery charge indicator is animated while charging. It takes approximately 3 hours to fully charge the battery.
  3. When charging is completed, is displayed on the screen. If the phone is turned off when the charger is connected to the phone only the battery charge indicator will be shown on the display.
  4. When you have fully charged the battery and disconnected the charger from the device, unplug the charger from the wall socket.

How do you turn the phone on and off?

  1. Press and hold the red end call/power button on the phone to turn it on or off.
  2. Confirm with Yes to power off.

What should you do if the SIM card is protected with a PIN code?

If the SIM card is valid but protected with a PIN code, PIN is displayed. Enter the PIN code and press Ok (upper left corner of keypad). Delete with Clear (upper right corner of keypad). If PIN and PUK codes were not provided with your SIM card, contact your service provider.

What happens if you enter the wrong PIN code too many times?

When no more attempts remain, PIN blocked is displayed. The SIM card must then be unlocked with the PUK code.

How do you unlock the SIM card with the PUK code?

  1. Enter the PUK code and confirm with Ok.
  2. Enter a new PIN code and confirm with Ok.
  3. Re-enter the new PIN code and confirm with Ok.

What is the Start-up wizard?

When starting the phone for the first time, you can use the Start-up wizard to set some basic settings. Press Yes to change or No if you do not want to change. The default language is determined by the SIM card.

How do you change the language, time and date?

See “Phone settings”, p.9.

How do you access the Start-up wizard later?

From standby mode, press Menu > Settings > General > Start-up wizard.

What do the lights on the phone indicate?

  • The lights will flash when you have a new message or a missed call. After reading the new message or missed call, the flashing will stop.
  • The lights will flash when the battery is running low and during charging.

How do you navigate the phone?

  • When the phone is ready to use, and you have not keyed in any characters, the phone is in standby.
  • Press the red end call/power button to return to standby mode.
  • Press the left selection button to access the phone Menu or the right selection button Name to access your saved contacts in the phonebook.
  • Use the arrow buttons to scroll in menus.

How do you confirm an action?

To confirm an action, press Ok.

How do you select an item?

To select an item, scroll or highlight the item using the arrow keys and then press Ok.

How do you enter text manually?

  • Press a numerical key repeatedly until the desired character is shown.
  • Wait a second before entering the next character from the same numerical key.

How do you enter special characters?

  1. Press * for a list of special characters.
  2. Select the desired character with the arrow keys and press Ok to confirm.

How do you move the cursor within text?

Use the arrow keys to move the cursor within the text.

How do you switch between upper case, lower case, and numerals?

Press # to choose between upper case, lower case, and numerals.

How do you change the writing language?

  1. Press and hold # for a list of available languages.
  2. Select the language with the arrow keys and press Ok to confirm.

How do you enter text with predictive text?

  • Press each key once, even if the displayed character is not the one you want. The dictionary will suggest words based on the keys you have pressed.
  • Use the arrow keys to view the suggested words.
  • Press Select and continue with the next word. Alternatively, press 0 to continue with the next word.
  • If none of the suggested words are correct, use manual input mode.
  • To temporarily switch between predictive text and manual input mode, press and hold *.

How do you change the input mode?

Press # to change input mode. The icon on the top left of the display indicates the input mode.

What are the different input mode icons?

  • Abc Sentence case with predictive text
  • ABC UPPER CASE with predictive text
  • abc lower case with predictive text
  • Abc Sentence case
  • ABC UPPER CASE
  • abc lower case
  • 123 Numerals

What does it mean that this phone is hearing aid compatible?

This phone is hearing aid compatible. Hearing aid compatibility is not a guarantee that a specific hearing aid will work with a specific phone. Mobile phones contain radio transmitters that may interfere with hearing aid performance. This phone has been tested for use with hearing aids, for some of the wireless technologies that it uses, but there may be some newer wireless technologies that have not been tested yet for use with hearing aids. To ensure that a specific hearing aid works well with this phone, test them together before making a purchase.

What are the two types of ratings for hearing aid compatibility?

  • M: To use your hearing aid in this mode, make sure that your hearing aid is set to “M-mode” or acoustic coupling mode, and position the phone’s receiver near the hearing aid’s built-in microphone. For the best results, try using the phone in different positions relative to your hearing aid.
  • T: To use your hearing aid in this mode, make sure that your hearing aid is set to “T-mode” or telecoil coupling mode (not all hearing aids have this mode). For the best results, try using the phone in different positions relative to your hearing aid.

How do you set the time and date?

  1. Press Menu > Settings > General > Time & date.
    • Set time to enter the time (HH:MM).
    • Set date to enter the date (DD/MM/YYYY).
  2. Press Ok to confirm.

How do you set the phone to automatically update the time and date?

In Time & date select Auto time > On.

How do you set the time and date format?

  1. Press Menu > Settings > General > Time & date > Set format.
    • Time format > 12 hours or 24 hours.
    • Date format and select the desired date format.
  2. Press Ok to confirm.

How do you change the language?

  1. Press Menu > Settings > General > Language.
  2. Select the wanted language.
  3. Press Ok to confirm.

How do you use the block function?

  1. Press Menu > Settings > General > Block function.
  2. Select each function you want to disable and press Off.
  3. Press Done to confirm.

How do you set PIN code options?

  1. Press Menu > Settings > Security > SIM lock:
    • On to activate the PIN code. You need to enter the PIN code every time the phone is started.
    • Off to deactivate the PIN code.
    • Automatic to start the phone without the PIN code. The phone remembers it automatically, but if the SIM card is moved to another phone the PIN code needs to be entered when the phone is started.
  2. Press Ok to confirm.

How do you change the PIN code?

  1. Press Menu > Settings > Security > Passwords > PIN.
  2. Enter the current PIN code and press Ok.
  3. Enter the new PIN and press Ok. Repeat to confirm.

How do you use the blacklist function?

  1. Press Menu > Settings > Phonebook > Blacklist.
  2. Select Activation.
    • On to activate the function.
    • Off to deactivate the function.
  3. Select Number list.
  4. Select Add > Phonebook to add a contact from the phonebook. Alternatively, press Manual to add names or numbers manually.
  5. Select the phone number and press Edit or Unblock.
  6. Press Ok to confirm.

How do you add a number to the blacklist directly from the call log?

Press Options > Block > Yes.

How do you use the whitelist function?

  1. Press Menu > Settings > Security > Whitelist.
  2. Select On to enable, or Off to disable.
  3. Press Ok to confirm.

How do you make a call?

  1. Enter the phone number including the area code. Delete with Clear.
  2. Press the call button to make a call. Press Abort to cancel the call.
  3. Press the end call/power button to end the call.

How do you make an international call?

Use + before the country code for best operation. Press * twice for the international prefix +.

How do you call from the phonebook?

  1. Press Name to open the phonebook.
  2. Scroll through the phonebook, or quick search by pressing the key corresponding to the first letter of the entry.
  3. Press Options > Call to dial the selected entry. If needed, select the number. Alternatively, press the call button to dial.
  4. Press Abort or the end call/power button to cancel the call.

How do you receive a call?

  1. Press the call button to answer.
  2. Alternatively press Silent to switch off the ringtone or press the end call/power button or close the flip to reject directly (busy signal).
  3. Press the end call/power button to end the call.

How do you control the volume during a call?

Use the volume control buttons to adjust the sound volume. The volume level is indicated on the display.

How do you activate silent mode?

Press and hold the # shortcut button to activate or deactivate silent mode.

What happens when a headset is connected?

When a headset is connected, the internal microphone in the phone is automatically disconnected. If available, use the answer key on the headset to answer and end calls.

What are the call options during a call?

  • Options (left selection button):
    • Volume to adjust the volume.
    • Hold single call/Retrieve single to hold/retrieve the current call.
    • End single call to end the current call (same as the end call/power button).
    • New call to call another number (Conference).
    • Phonebook to search the phonebook.
    • Messages to write or read text messages.
    • Mute to disable the microphone.
  • SPK on (right selection button):
    • The loudspeaker allows you to speak without holding the phone close to the ear.
    • Press SPK on to activate. Speak clearly into the phone microphone at a maximum distance of 1 m. Use the volume buttons to adjust the loudspeaker volume.
    • Press SPK off to return to normal mode.

How do you make an SOS call?

As long as the phone is switched on, it is always possible to place an SOS call by entering the main local emergency number for your present location followed by the call button.

How do you access the call log?

  1. Press the call button.
  2. Alternatively, press Menu > Call log.
  3. Use the arrow keys to select:
    • Received call
    • Dialed call
    • Missed call
  4. Press the call button to call, or press Options:
    • Call to call the contact.
    • View to show details for the selected call.
    • Send SMS to send a text message.
    • Send MMS to send a picture message.
    • Delete to delete the call.
    • Delete all to delete all calls in the call log.
    • Save to save the number in the phonebook.
    • Block to block this number from calling or texting you.

How do you check the call timer?

  1. Press Menu > Settings > Calls > Call timer:
    • Last call to show the elapsed time of the most recent call.
    • Outgoing calls to show the elapsed time of all made calls.
    • Received calls to show the elapsed time of all received calls.
    • Reset all > Yes to reset all.
  2. Press Ok to confirm.

How do you set the answer mode?

  1. Press Menu > Settings > Calls > Answer mode:
    • Open > On to answer incoming calls by opening the flip.
    • Any key > On to be able to answer incoming calls by pressing any key (exception end call/power button).
  2. Press Ok to confirm.

How do you activate call waiting?

  1. Press Menu > Settings > Calls > Call setup.
  2. Select Call waiting > Activate.
  3. Press Ok to confirm.

How do you disable call waiting?

Repeat the same steps and select Deactivate.

How do you check if call waiting is active or not?

Repeat the same steps and select Query status.

How do you set up call divert?

  1. Press Menu > Settings > Calls > Call setup > Call divert:
    • Voice calls to divert all voice calls.
    • Unreachable to divert incoming calls if the phone is turned off or out of range.
    • No reply to divert incoming calls if unanswered.
    • If busy to divert incoming calls if the line is busy.
    • Cancel diverts to cancel all call divert settings.
  2. Press Ok to confirm.

How do you set the caller ID?

  1. Press Menu > Settings > Calls > Call setup > Caller ID:
    • Set by network to use the default setting by the network.
    • Hide ID to never show your number.
    • Send ID to always show your number.
  2. Press Ok to confirm.

How do you use call barring?

  1. Press Menu > Settings > Calls > Call setup > Call barring.
  2. Select Outgoing calls:
    • All calls to answer incoming calls but not calling.
    • Internat.calls to block calls to international numbers.
    • Int. except home to block international calls except to the country associated with the SIM card.
  3. Press Ok to confirm.
  4. Select Incoming calls:
    • All calls to call but not to receive incoming calls.
    • When roaming to block incoming calls while roaming (operating in other networks).
  5. Press Ok to confirm.
  6. Select Cancel all to cancel all call barring (password needed). Press Ok to confirm.

How do you use fixed dial (FDN)?

  1. Press Menu > Settings > Security > Fixed dial:
    • Mode > On to enable or Off to disable.
    • Fixed numbers > Empty > Add:
      • Phonebook to add a contact from the Phonebook. Press Ok to confirm.
      • Manual and enter name and number. Alternatively, select an entry and press Options > Add, Edit or Delete.
  2. If needed, enter PIN2 and press Ok to confirm.

How do you add a contact?

  1. Press Menu > Phonebook > -New contact- > Add.
  2. Enter a Name for the contact.
  3. Use the arrow keys to select Mobile, Home or Office and enter the phone number(s) including the area code.
  4. Select Picture > Edit to associate picture to the contact:
    • Take picture to use the camera to take a picture.
    • My pictures to select an existing picture.
  5. Press Save.

How do you manage phonebook contacts?

  1. Press Menu > Phonebook.
  2. Select a contact, then press Options:
    • Call to call the contact.
    • Send SMS to send a text message.
    • Send MMS to send a picture message.
    • View to show details for the selected contact.
    • Edit to edit the contact. Use the arrow keys to scroll. Delete with Clear. When done, press Save.
    • Add to add contact.
    • Top 10 to set the entry as one of the first 10 contacts listed in the phonebook.
    • Delete to delete the selected contact. Press Yes to confirm or No to abort.
    • Delete all to delete all contacts. Select From SIM or From phone to delete all contacts from the SIM card or phone memory.
    • Copy all > From phone to copy all contacts from the phone memory to the SIM card, or From SIM to copy all phonebook contacts from the SIM card to the phone memory.
    • Send vCard and select:
      • Send by SMS to send the selected phonebook contact as a vCard via text message.
      • Send by MMS to send the selected phonebook contact as a vCard via picture message.
      • Send by Bluetooth to send the selected phonebook contact as a vCard via Bluetooth.
  3. Press Ok to confirm.

How do you set the phonebook storage?

  1. Press Menu > Settings > Phonebook > Storage:
    • SIM to save 1 phone number per contact.
    • Phone to save 500 contacts with 3 phone numbers each Mobile, Home and Office.
  2. Press Ok to confirm.

How do you set the phonebook picture view mode?

  1. Press Menu > Settings > Phonebook > Phonebook picture:
    • On to display the contact’s associate picture if existing.
    • Off to display only the names of contacts.
  2. Press Ok to confirm.

How do you set up voice mail?

  1. Press Menu > Settings > Phonebook > Voice mail.
  2. Select Empty > Add:
    • Phonebook to add a contact from the Phonebook. Press Ok to confirm.
    • Manual and enter name and number.
  3. Press Ok to confirm. To edit or delete an existing entry, select it and press Options > Edit or Delete.

How do you call voice mail?

Press and hold the 1 shortcut button.

How do you use speed dial?

Use 0 and 2–9 to speed dial an entry from standby. Press and hold the corresponding key.

How do you add speed dial numbers?

  1. Press Menu > Settings > Phonebook > Speed dial.
  2. Select 0 > Add and select an entry from the phonebook.
  3. Press Ok to confirm.
  4. Repeat to add speed dial entries for buttons 2–9.

How do you set up Top 10?

  1. Press the Top 10 shortcut button, or press Menu > Settings > Phonebook > Top 10.
  2. Select one of the empty entries and press Add.
  3. Use the arrow keys to scroll through the phonebook, or quick search by pressing the key corresponding to the first letter of the entry.
  4. Press Ok to save the selected entry, or press Back to discard changes.

How do you add an entry to the Top 10 from the phonebook?

Select the contact and press Options > Top 10.

How do you add an owner number?

  1. Press Menu > Phonebook > Owner number > Empty > Add.
  2. Enter name and number.
  3. When done, press Ok.

How do you add or edit ICE (In Case of Emergency) information?

  1. Press Menu > Phonebook > ICE.
  2. Scroll the list of entries.
  3. Press Edit to add or edit information in each entry.
    • Name: enter your name.
    • Birth: enter your date of birth.
    • Height: enter your height.
    • Weight: enter your weight.
    • Address enter your home address.
    • Language: enter your preferred language.
    • Insurance: enter your insurance provider and policy number.
    • Contact 1:, Contact 2: and Doctor: Press Options to Add or Delete a contact from the phonebook, or Save to accept the current entry.
    • Condition: enter any medical conditions or medical devices (e.g. diabetic, pacemaker).
    • Allergies: enter any known allergies (e.g. penicillin, bee stings).
    • Blood type: enter your blood type.
    • Vaccination: enter any relevant vaccination.
    • Medication: enter any medication that you are treated with.
    • Other info: enter other information (e.g. organ donor, living will, consent to treat).
  4. When done, press Save.

How do you make an assistance call?

  1. When help is needed, press and hold the assistance button for 3 seconds, or press it twice within 1 second.
  2. The assistance call begins after a delay of 5 seconds. In this time you can prevent a possible false alarm by pressing the end call/power button.
  3. An assistance text message (SMS) is sent to all recipients.
  4. A positioning text message (SMS) is sent to all recipients.
  5. The first recipient in the list is called. If the call is not answered within 25 seconds, the next number is called. Calling is repeated 3 times or until the call is answered, or until the end call/power button is pressed.

How do you activate the assistance function?

  1. Press Menu > Settings > Assistance > Activation:
    • On Normal to press and hold the button for approximately 3 seconds, or press it twice within 1 second.
    • On (3) to press the button 3 times within 1 second.
    • Off to disable the assistance button.
  2. Press Ok to confirm.

How do you add numbers to the assistance number list?

  1. Press Menu > Settings > Assistance > Number list.
  2. Select Empty > Add > Phonebook to add a contact from the phonebook.
  3. Alternatively, press Manual to add names or numbers manually.
  4. Press Ok to confirm.
  5. Repeat until you have 5 contacts (maximum).

How do you activate text messages (SMS) for the assistance button?

  1. Press Menu > Settings > Assistance > SMS > Activation:
    • On to send a text message before calling.
    • Off to call without sending a text message first.
  2. Press Ok to confirm.

How do you create the assistance message?

  1. Press Menu > Settings > Assistance > SMS > Message.
  2. Select Edit and write the message.
  3. Press Ok to confirm.

How do you activate the position SMS function?

  1. Press Menu > Settings > Assistance > Position SMS.
  2. Select On to enable, or Off to disable.
  3. Press Ok to confirm.

How do you activate the “Confirm with 0” function?

  1. Press Menu > Settings > Assistance > Confirm with “0”.
  2. Select On to enable, or Off to disable.
  3. Press Ok to confirm.

How do you select the notification signal type for the assistance sequence?

  1. Press Menu > Settings > Assistance > Signal type:
    • High to use loud signals (default).
    • Low to use one low signal.
    • Silent no sound indication, like a normal call.
  2. Press Ok to confirm.

How do you create and send a text message (SMS)?

  1. Press the message shortcut button, or press Menu > Messages > Create new > SMS.
  2. Write your message, then press To.
  3. Select a recipient from Phonebook. Alternatively, select Enter number to add a recipient manually and press Done.
  4. Press Add to add more recipients.
  5. When done, press Send.

How do you create and send a picture message (MMS)?

  1. Press the message shortcut button, or press Menu > Messages > Create new > MMS.
  2. Write your message.
  3. Press Options > Add picture:
    • My pictures to select a file.
    • Take picture to use the camera to take a picture.
  4. Select Add subject and enter your subject, then press Done.
  5. Select To and select a recipient from Phonebook. Alternatively, select Enter number to add a recipient manually and press Done.
  6. Press Add to add more recipients.
  7. Press Send to send.

CLICK HERE TO DOWNLOAD DORO 6041 (01) PDF MANUAL

Visitors also searched:

  1. DORO 8035 (01) PDF DOCUMENT
  2. DORO LEVA E21 (01) PDF DOCUMENT
  3. DORO AURORA A30 (01) PDF Document

This Post Has One Comment

  1. Anonymous July 15, 2021 Reply

    All this is utter crap, totally confusing!

Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.