Free English DJI NEO (03) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DJI NEO (03) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I use to charge the DJI NEO Two-Way Charging Hub when charging DJI Neo Intelligent Flight Batteries?
When using the DJI NEO Two-Way Charging Hub to charge DJI Neo Intelligent Flight Batteries, it is recommended to use the DJI 65W Portable Charger or a USB Power Delivery charger.
What batteries are compatible with the DJI NEO Two-Way Charging Hub?
The DJI NEO Two-Way Charging Hub is only compatible with the BWX521-1435-7.3 Intelligent Flight Battery. Do not use the charging hub with other battery models.
Where should I place the DJI NEO Two-Way Charging Hub during use?
Place the DJI NEO Two-Way Charging Hub on a flat and stable surface with good ventilation when in use. Make sure the device is properly insulated to prevent fire hazards.
What should I do if the metal terminals on the battery ports of the DJI NEO Two-Way Charging Hub have buildup?
Do not attempt to touch the metal terminals on the battery ports. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
What is recommended regarding batteries with low power when using the DJI NEO Two-Way Charging Hub?
Make sure to charge batteries with low battery power in time. It is recommended to store the batteries in the DJI NEO Two-Way Charging Hub.
How do I insert Intelligent Flight Batteries into the DJI NEO Two-Way Charging Hub for charging?
Insert the batteries into the battery ports of the DJI NEO Two-Way Charging Hub until they click into place.
How do I connect the DJI NEO Two-Way Charging Hub to a power outlet?
Connect the DJI NEO Two-Way Charging Hub to a power outlet using a USB-C charger.
What do the status LEDs indicate during charging on the DJI NEO Two-Way Charging Hub?
The status LEDs indicate the battery status during charging. Refer to the Status LEDs Descriptions for more information about the blinking patterns.
What is the charging method on the DJI NEO Two-Way Charging Hub when the charger power is between 10 W and less than 30 W?
If the charger power is 10 W ≤ Charger Power < 30 W, the DJI NEO Two-Way Charging Hub charges in sequence from a high to low battery level.
What is the charging method on the DJI NEO Two-Way Charging Hub when the charger power is between 30 W and less than 45 W?
If the charger power is 30 W ≤ Charger Power < 45 W, the DJI NEO Two-Way Charging Hub charges two batteries simultaneously: First charges the battery with a lower battery level to the same level as the highest one and then charges the two batteries simultaneously.
What is the charging method on the DJI NEO Two-Way Charging Hub when the charger power is greater than or equal to 45 W?
If the charger power is Charger Power ≥ 45 W, the DJI NEO Two-Way Charging Hub charges three batteries simultaneously: First charges the two batteries with a lower battery level to the same level as the highest one and then charges the batteries simultaneously.
Can the batteries be stored in the DJI NEO Two-Way Charging Hub after charging?
The batteries can be stored in the DJI NEO Two-Way Charging Hub after charging. Remove a battery from the charging hub for use.
How do I use the DJI NEO Two-Way Charging Hub as a power bank?
Step 1. Insert the Intelligent Flight Batteries into the DJI NEO Two-Way Charging Hub. Connect an external device, such as a smartphone or tablet to the USB-C port of the charging hub, and then press and hold the function button for three seconds.
Step 2. Batteries will be discharged based on the battery level, from the lowest to the highest, and supply power to external devices. To stop charging the external device, disconnect the external device from the charging hub.
- If the remaining power of a battery is lower than 7%, the battery cannot charge the external device.
- To switch to charging Intelligent Flight Batteries, reconnect the USB-C cable.
How do I check the battery level using the DJI NEO Two-Way Charging Hub?
After the batteries are inserted into the DJI NEO Two-Way Charging Hub, press the function button once and the status LEDs will display the battery levels.
What does it mean if the status LEDs in an array blink quickly successively on the DJI NEO Two-Way Charging Hub?
If the status LEDs in an array blink quickly successively, the battery in the corresponding battery port is being charged using a USB PD charger.
What does it mean if the status LEDs in an array blink slowly successively on the DJI NEO Two-Way Charging Hub?
If the status LEDs in an array blink slowly successively, the battery in the corresponding battery port is being charged using a normal charger.
What does it mean if the status LEDs in an array are solid on the DJI NEO Two-Way Charging Hub?
If the status LEDs in an array are solid, the battery in the corresponding battery port is fully charged.
What does it mean if all status LEDs blink in sequence on the DJI NEO Two-Way Charging Hub?
If all status LEDs blink in sequence, no battery is inserted into the DJI NEO Two-Way Charging Hub.
What is the Product Model for the DJI NEO Two-Way Charging Hub?
The Product Model for the DJI NEO Two-Way Charging Hub is CHX521-65.
What is the Compatible Battery Model for the DJI NEO Two-Way Charging Hub?
The Compatible Battery Model for the DJI NEO Two-Way Charging Hub is BWX521-1435-7.3.
What is the Operating Temperature range for the DJI NEO Two-Way Charging Hub?
The Operating Temperature range for the DJI NEO Two-Way Charging Hub is 5 to 40 degrees Celsius (41 to 104 degrees Fahrenheit).
What is the USB-C Input specification for the DJI NEO Two-Way Charging Hub?
The USB-C Input specification for the DJI NEO Two-Way Charging Hub is 5 V/9 V/12 V/15 V/20 V = Max 3 A.
What is the USB-C Output specification for the DJI NEO Two-Way Charging Hub?
The USB-C Output specification for the DJI NEO Two-Way Charging Hub is 5V-2A.
What is the Charging Time for the DJI NEO Two-Way Charging Hub using the DJI 65W Portable Charger?
The Charging Time using the DJI 65W Portable Charger is:
- Fully charge three batteries: Approx. 60 mins
- Fully charge one battery: Approx. 42 mins
What is the recommended charger for the DJI NEO Two-Way Charging Hub?
The Recommended Charger for the DJI NEO Two-Way Charging Hub is the DJI 65W Portable Charger or other USB Power Delivery chargers.
What information do the Status LEDs on the DJI NEO Two-Way Charging Hub display?
Each battery port has its corresponding status LED array to display charging status, battery level, and abnormal status of the corresponding battery.
What does it mean when the status LEDs in an array are solid on the DJI NEO Two-Way Charging Hub?
If the status LEDs in an array are solid, the battery in the corresponding battery port is fully charged.
What is the battery level description based on for the DJI NEO Two-Way Charging Hub?
Each battery port has its corresponding status LED array. The battery level description is the same as the one for the battery level LEDs on the aircraft. Refer to the user manual of the aircraft for more information.
What is the abnormal status indication on the DJI NEO Two-Way Charging Hub?
The LED status for battery abnormality is the same as that on the aircraft. Refer to the user manual of the aircraft for more information.
What are the charging status descriptions for the DJI NEO Two-Way Charging Hub’s status LEDs?
The Charging Status descriptions for the status LEDs in an array are:
| Status LEDs in an array | Description |
|---|---|
| blink quickly successively | The battery in the corresponding battery port is being charged using a USB PD charger. |
| blink slowly successively | The battery in the corresponding battery port is being charged using a normal charger. |
| are solid | The battery in the corresponding battery port is fully charged. |
| All status LEDs blink in sequence | No battery is inserted. |
How do I stop charging an external device when using the DJI NEO Two-Way Charging Hub as a power bank?
To stop charging the external device, disconnect the external device from the DJI NEO Two-Way Charging Hub.
What happens if the remaining power of a battery is lower than 7% while using the DJI NEO Two-Way Charging Hub as a power bank?
If the remaining power of a battery is lower than 7%, the battery cannot charge the external device.
How do I switch back to charging Intelligent Flight Batteries when using the DJI NEO Two-Way Charging Hub as a power bank?
To switch to charging Intelligent Flight Batteries, reconnect the USB-C cable.
What charging methods apply based on charger power for the DJI NEO Two-Way Charging Hub?
The charging method varies depending on the power of the charger. The details are as follows:
| Charger Power | Charging Method |
|---|---|
| 10 W ≤ Charger Power < 30 W | Charges in sequence from a high to low battery level. |
| 30 W ≤ Charger Power < 45 W | Charges two batteries simultaneously: First charges the battery with a lower battery level to the same level as the highest one and then charges the two batteries simultaneously. |
| Charger Power ≥ 45 W | Charges three batteries simultaneously: First charges the two batteries with a lower battery level to the same level as the highest one and then charges the batteries simultaneously. |
CLICK HERE TO DOWNLOAD DJI NEO (03) PDF DOCUMENT