FREE ENGLISH CHIQ CBM432W (01) PDF USER GUIDE
FREE ENGLISH CHIQ CBM432W (01) PDF USER MANUAL
FREE ENGLISH CHIQ CBM432W (01) PDF OWNER GUIDE
FREE ENGLISH CHIQ CBM432W (01) PDF OWNER MANUAL
FREE ENGLISH CHIQ CBM432W (01) PDF REFERENCE GUIDE
FREE ENGLISH CHIQ CBM432W (01) PDF INSTRUCTION GUIDE
FREE ENGLISH CHIQ CBM432W (01) PDF REFERENCE MANUAL
FREE ENGLISH CHIQ CBM432W (01) PDF INSTRUCTION MANUAL
FREE ENGLISH CHIQ CBM432W (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD CHIQ CBM432W (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
CHIQ CBM432W (01) PDF SUMMARY:
What should I do with this manual?
Keep this manual in a safe location and use it for reference. Read this manual carefully before commencing operation of this appliance, and comply with the Terms and Conditions.
What should I do before operating the refrigerator?
Read all instructions before operating the refrigerator. Do not attempt to repair or modify this unit in any way as it can cause harm or void the warranty. Please ensure all persons using this appliance are also informed and comply with the details set out within this manual and the product Terms and Conditions.
What should I do with the packaging when unpacking the appliance for the first time?
Keep all cardboard and plastic packaging out of reach from children and report any notable defects with the appliance to Changhong or retailer as soon as it is noted. Failure to do so can result in a non-warranty claim. Keep all packaging materials in a safe location until the unit has been properly installed.
What should I do if the power cord is damaged?
If the supplied power cord of this unit is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified persons in order to avoid any risk of injury.
What is recommended to prevent damage to the power cord?
It is recommended the power cord is situated in a safe location when operating or transporting the appliance to prevent any damage that may cause electrical shock or fire hazards.
How do I unplug the appliance?
DO NOT unplug the appliance without switching the unit off from the outlet first or by yanking the cord.
What should I do if I discard this unit?
Remove the door/s from the unit. Leave the shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the refrigerator. Children should be supervised near the unit at all times. Only dispose of this appliance at an authorized waste disposal center.
What should I never do when cleaning the refrigerator?
Never clean the refrigerator or refrigerator parts with flammable fluids, or store gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator as the gas and/or vapor can cause a fire hazard, explosion or inhalation.
What should I ensure about the power outlet when installing or moving the unit?
Make certain, when installing or moving the unit that the power outlet has been connected to, has been fitted by a qualified electrician and the ground wire has been connected properly to meet the Australian Electrical Standards.
What must be observed for safety regarding the R600a refrigerant?
- During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
- Leaking refrigerant can ignite and may damage the eyes.
- In the event any damage does occur, avoid exposure to open fires and any device which creates a spark.
- Disconnect the appliance from the mains power.
- Thoroughly ventilate the room in which the appliance is located for several minutes.
- Notify Customer Service for necessary action and advice.
- The room for installing the appliance must be at least 1 cubic meter per 8 grams of refrigerant.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
What should I do to the ventilation openings?
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
What should I avoid when defrosting?
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
What should I avoid in the refrigerant circuit?
Do not damage the refrigerant circuit.
What should I avoid using inside the food storage compartments?
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
What should I avoid storing in the appliance?
Do not store explosive substances such as aerosol cans with a flammable propellant in the appliance.
Where should I dispose of the appliance?
Please ensure the appliance is taken to a recycle center for safe recycling. DO NOT dispose of the appliance in land fill as the insulation and refrigerant gas contained in these appliances are flammable.
What should I do before using the refrigerator?
Remove the exterior and interior packing. Before connecting the refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with lukewarm water using a soft cloth.
What should I not do with this appliance during installation?
This appliance is designed to be free standing only, and should not be recessed or built-in.
Where should I place the refrigerator?
Place the refrigerator on a leveled/even floor surface that is strong enough to support the weight of the refrigerator when it is fully loaded to prevent vibrations and allow water to properly drain.
How do I adjust the leveling feet?
The front feet can be adjusted to level the appliance properly. The leveling feet should only be used in forward and backward motions and never side to side.
How much space should I allow for ventilation?
Allow at least 5cm of space between the back and sides of the refrigerator to allow proper air ventilation.
Where should I situate the refrigerator?
Situate the refrigerator away from direct sunlight and sources of direct heat (stove, heater, radiator, etc.).
Can this unit be installed outside?
This unit is not designed for outside installation.
Where should I avoid placing the refrigerator?
Avoid situating the refrigerator in moist OR pest infestation areas.
How should I plug the refrigerator in?
Plug the refrigerator into dedicated, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord.
What should I do after plugging in the appliance?
After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 2~3 hours before placing food in the refrigerator or freezer compartment.
What should I avoid placing on top of the appliance?
Do not place items on the top of this appliance.
What are some energy saving tips?
- Allow hot foods to cool to room temperature before placing in the refrigerator.
- Do not adjust the temperatures colder than necessary.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the refrigerator.
- Organize and label food to reduce door openings and extended searches.
- Remove as many items as needed at one time, and close the door as soon as possible.
- Refrain from leaving the door/s open for a long time to conserve energy.
What should I do to start?
- Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent and with clear water, and wipe them dry. Note: Electric parts of the refrigerator can only be wiped by dry cloth. 2. Turn on electricity. The compressor begins to work. 3. Open the door 30 minutes later, if the temperature in the refrigerator decreased obviously, it shows that the refrigerator system works well.
How do I set the temperature?
- Click the “refrigerator” or “freezer” button and when it flickers in the symbol, temperatures can be set; each time when the button is clicked, the temperature changes accordingly (the display shows the temperature accordingly). Temperatures cannot be set under functions of fast cooling, fast freezing, intelligence and vacation. 2) Under temperature setting, if there is no button operation in 5 seconds, the button stops flickering and the set temperature comes into effect.
What is the temperature cycle for the Refrigerator?
2℃→3℃→4℃→5℃→6℃→7℃→8℃→OFF→2℃.
What is the temperature cycle for the Freezer?
-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃→-17℃→-16℃→-24℃.
How do I use the intelligence function?
- To enter intelligence: Click “option” until it flickers and then click “OK” to enter this function. 2) To quit intelligence: Under intelligence, click “option” until it goes to intelligence, click “OK” to quit this function and the light goes off.
How do I use the fast cooling function?
- To enter fast cooling: Click “option” until it flickers in “fast cooling” and then click “OK” to enter this function. 2) To quit fast cooling: Under fast cooling, click “option” until it goes to “fast cooling” and then click “OK” to quit this function. The light in fast cooling goes off and the refrigerator temperature goes back to the value before fast cooling.
How do I use the fast freezing function?
- To enter fast freezing: Click “option” until it flickers in “fast freezing” and then click “OK” to enter this function. 2) To quit fast cooling: Under fast freezing, click “option” until it goes to “fast freezing” and then click “OK” to quit this function. The light in fast freezing goes off and the freezer temperature goes back to the value before fast freezing. When fast freezing time is up (26 hours), it quits automatically.
How do I use the vacation function?
- To enter vacation: Click “option” until it flickers in “fast freezing” and then click “OK” to enter this function. 2) To quite vacation: Under vacation, click “option” until it goes to “vacation” and then click “OK” to quit this function. The light in vacation goes off and the refrigerator temperature goes back to the value before vacation.
What is the power off memory?
With this design, the refrigerator can automatically keep all the setting in case of power off. When the unit is plugged in again, the refrigerator will run with the setting before power off.
What is the Power-On Delay?
To prevent harm to the refrigerator in case of sudden power cut and power on, the unit does not start immediately if the power off time is less than 5 minutes.
What is the freezer over-temperature alarm?
When the freezer temperature is higher than 10℃ at the first time connected to power, the symbol light of the freezer chamber goes on and the number representing temperature flickers. Press any button or wait for 5 seconds, flickering stops and it goes back to the temperature that was set.
What is the refrigerator door opening alarm?
When the refrigerator is open over 3 minutes, the buzzer will buzz. Close the door or press any button to stop the alarm, but for the latter, the alarm will go off again after 3 minutes.
What is the sensor fault alarm?
When it shows “E0”, “E1”, “E2” or other abnormal symbols, it means sensor faults and the refrigerator needs repair.
What should be avoided when storing food in the refrigerator?
Effervescent drinks should not be stored in food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold.
What should I consider when storing food?
The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food.
How should I store cooked dishes?
The cook dishes can be put into refrigerator to keep fresh after their temperature decreases to room temperature.
Where do I store eggs, butter, milk, and bottle drinks?
Egg pockets and bottle pockets for eggs, butter, milk and bottle drinks,etc.
How should I store food or containers to not affect the air-conditioning cycle?
Storage of food or containers should be left between the gap, so as not to affect the air-conditioning cycle.
How should I store food to avoid cross-contamination?
Food to be stored should be wrapped with clean plastic film or fresh keeping paper, then distributed to several frames even to avoid contamination and the loss of water and smell mixture.
Where should I put fruits and vegetables?
Fruits and vegetables should be put into the salad crisper to prevent excessive evaporation of water and freshness.
What should I do before storing hot food?
Cool hot food down to the room temperature before storing otherwise consumption of electricity will increase and would lead to frost forming inside.
What type of foods are not suitable for storage in a chill compartment?
Some types of fresh vegetables and fruits are sensitive to cold, and that therefore they are not suitable for storage in this kind of compartment.
How should I store cooked meats?
Cooked meats should always be stored on a shelf above raw meats to avoid bacterial transfer.
How should I store raw meats?
Keep raw meats on a plate which is large enough to collect juices and cover it with cling film or foil.
How should I pack food to prevent flavor transfer and drying out?
To prevent transfer of flavors and drying out, food should be separately packed or covered. Fruit and vegetables need not be wrapped.
What should I do with pre-cooked food before placing in the fridge?
Allow pre-cooked food to cool down before placing in the Fridge.
What should I do when returning from shopping?
When returning from shopping, sort foods to be kept in your Fridge before opening the door.
What should I do to minimize cold air escaping?
Only open the door to put food in or take it out.
What should I do in the event of a power outage?
Do not open the refrigerator door as much as possible so that even in hot summer food can be safely and freshly kept for hours.
What should I do if I have a power outage notice in advance?
Please an hour in advance will be temperature control stalls transferred to a strong cold position, so that the refrigerator fully frozen. Note that this time do not store new food! To be restored after the timely supply of temperature control gear to the original location. You can also make some ice, with a watertight container, and put it in the upper part of the freezer.
What are the preparations for freezing?
- Leave cooked food to cool completely.
- Chill food in a Fridge before freezing if possible.
- Consider how you want to cook the food before freezing it.
- Don’t freeze food in metal containers as you may want to microwave it straight from the Freezer.
- Use special Freezer bags available from supermarkets, Freezer film, polythene bags, plastic containers, aluminum foil for acidic foods(such as citrus fruits). Do not use thin cling film or glass. Do not use used food containers (unless cleaned thoroughly first).
- Exclude as much air from the container as possible.
- Leave a small amount of “air space” when freezing liquids, to allow for expansion.
How do I freeze liquids efficiently?
You can use the space in the Freezer most efficiently if you freeze liquids(or solids with liquids, such as stew) in square blocks. This is known as “performing” Pour the liquid into a polythene bag which is inside a square sided container. Freeze it like this, then remove it from the container and seal the bag.
What should I look for when buying frozen foods?
When you are buying frozen food, look at the Storage Guidelines on the packaging. Check the temperature of the frozen food cabinet in the shop where you buy your frozen foods. Make sure the frozen food package is in perfect condition.
When should I buy frozen products?
Always buy frozen products last on your shopping trip or visit to the supermarket.
How should I keep frozen food while shopping?
Try to keep frozen food together whilst shopping, and on the journey home as this will help to keep the food cooler.
Should I buy frozen food if I cannot freeze it straight away?
Don’t buy frozen food unless you can freeze it straight away.
Do some foods not need to be thawed before cooking?
For some foods, thawing before cooking is unnecessary. Vegetables and pasta can be added directly to boiling water or steam cooked. Frozen sauces and soups can be put into a saucepan and heated gently until thawed.
How should I handle food I am going to freeze?
Use quality food and handle it as little as possible. Freeze food in small quantities, it freezes faster, takes less time to thaw and enables you to eat it in the quantity you need.
How should I prepare for freezing a large amount of fresh food?
If you are freezing large amounts of fresh food, remember to turn the control dial to the low temperature range.
Does this appliance need to be defrosted manually?
This appliance is designed as automatic defrosting ,no need to defrost by hand.
What should I do if the unit is unplugged or loses power?
If the unit is unplugged or loses power, please wait approximately 3 to 5 minutes before restarting the unit. If there is any attempt to restart before this time delay, the refrigerator will not commence operation.
What should I avoid placing in front of the air vent?
Large quantities of food stored in the appliance or directly in front of the air vent will hinder the cooling efficiency of the appliance as this can affect the airflow.
How should I adjust the thermostat settings?
If you choose to change the thermostat settings in the fridge compartment, adjust the thermostat control by one increment at a time. Allow 24 hours for temperature to stabilize between adjustments. Do not keep opening and closing the door once increasing the temperature.
Where are the warmest and coolest areas inside the refrigerator compartment?
Typically the back wall and bottom lowest shelf will be the coolest, the top door rack will be the warmest.
Where should I not place raw vegetables?
To avoid frost bite, please don’t put raw vegetables too close to the coolest area.
What should I do upon installation of the new appliance?
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly and properly maintained thereafter.
How do I clean the refrigerator?
Turn off the refrigerator and then unplug the unit from the wall outlet. Remove all food content before washing the inside with a damp cloth soaked in lukewarm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a liter of water. Be sure to keep the door gasket (seal) clean to keep the unit running efficiently as improper cleaning can cause the seal to dislodge and tear. The exterior of the refrigerator should be cleaned with mild detergent and warm water. Dry the interior and exterior with a soft cloth. The condenser coils should be vacuumed when they are dusty or dirty.
Do I need to remove the water tray above the compressor to empty water?
Don’t need to remove the water tray above compressor to empty water that will be evaporated by heat from compressor.
What should I do for vacation time?
Turn off the refrigerator first and then unplug the unit from the wall outlet. Remove all food. Clean the refrigerator. Leave the lid open slightly to avoid possible formation of condensation, mold, or odors. Use extreme caution in the case of children. The unit should not be accessible to child’s play.
What should I do for short vacations?
Leave the refrigerator operating during vacations of less than three weeks.
What should I do for long vacations?
If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary or have the door removed.
What should I do when repositioning and relocating the refrigerator?
Turn off the refrigerator first and then unplug the unit from the wall outlet. Remove all the food and drinks. Securely tape down all loose items inside your refrigerator. Tape the doors shut. Be sure the refrigerator stays in the upright position during transportation.
Where should I install the refrigerator to save energy?
Install the refrigerator in the coolest part of the room, out of direct sunlight and away from heating ducts or registers. Do not place the refrigerator next to heat-producing appliances such as a range, oven or dishwasher.
How should I handle the refrigerator door to save energy?
The refrigerator door should remain open only as long as necessary; do not place hot food inside the refrigerator. Organize the refrigerator to reduce door openings. Remove as many items as needed at one time and close the door as soon as possible. The refrigerator door should be properly closed to avoid increased energy consumption, and the formation of excess ice and / or condensation inside.
How should I arrange the food to keep a homogenous temperature inside the refrigerator?
Constantly circulating cold air keeps the temperature homogenous inside the refrigerator. For this reason, it is important to properly distribute the food, to facilitate the flow of air.
What should I do before placing food inside the refrigerator to cut down on moisture build up?
Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up inside the unit.
What should I avoid when organizing the refrigerator to save energy?
Do not overcrowd the refrigerator or block cold airvents. Shelves should not be lined with aluminum foil, wax paper or paper toweling. Liners interfere with cold air circulation, making the refrigerator less efficient, which could cause food spoilage.
How should food for freezing be placed in the refrigerator?
The arrangement of food for storage and for freezing, where applicable, particularly including advice that food to be frozen is not to be placed in direct contact with food in storage and, if appropriate, that it could be necessary to reduce the quantity to be frozen if freezing every day is anticipated.
What is advisable to do during prolonged absences?
During prolonged absences (example: vacations), it is advisable to disconnect the refrigerator, remove all the food, and clean it. The door should be left slightly open to avoid mold and unpleasant odors.
What should I do with the refrigerator during short absences?
During short absences (example: holidays), the refrigerator can remain on. However, remember that prolonged power outages may occur while you are gone.
Can the evaporator clearance be used to store food?
The door to the evaporator clearance can be used to store food.
What storage times should I follow for foods?
The storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets.
What precautions should be taken to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance?
The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
What happens if there is a rise in temperature of the frozen food during manual defrosting, maintenance, or cleaning?
The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
What care is required with regard to frozen food in storage in the event of an extended non-running of the refrigerating appliance?
The care required with regard to frozen food in storage in the event of an extended non-running of the refrigerating appliance (interruption of power supply or failure of the refrigerating system).
What should I do with frozen food during defrosting?
It is better wrapping the frozen food in several layers of the glass shelves.
What are the possible causes if the refrigerator does not operate?
- Power cord isn’t plugged in properly.
- The circuit breaker tripped or a blown fuse.
What should I do if the light is not working?
The light bulb may be damaged. Refer to page 5 on how to change the globe.
What are the possible causes if the compressor runs all the time?
- The room temperature is hotter than normal.
- A large amount of food has been added to the refrigerator.
- The door is opened too often.
- The door is not closed completely.
- The temperature control is not set correctly.
- The door gasket does not seal properly.
- The refrigerator does not have the correct clearances.
- The refrigerator has recently been disconnected for a period of time. 4+ hours are required for the refrigerator to cool down completely pending on operating conditions.
What are the possible causes if the temperature inside the refrigerator is too warm?
- Temperature control is set incorrectly. Turn the control to a cooler setting and allow several hours for the temperature to stabilize.
- Freezer control incorrectly set. Set back to mid position.
- Door is kept open too long or is opened too frequently.
- The door is not closed completely.
- The door gasket does not seal properly.
- A large amount of warm or hot food might have been stored recently.
- The refrigerator has recently been disconnected for a period of time. 4 hours is required for the refrigerator to cool down completely.
What are the possible causes if the temperature inside the refrigerator is too cold?
- Freezer control incorrectly set. Set back to mid position.
- Temperature control is set too cold. Turn the control to a warmer setting and allow several hours for the temperature to stabilize.
What are the possible causes if the temperature of the external refrigerator surface is warm?
The exterior refrigerator walls can be as much as 30F warmer than room temperature. This is normal while the compressor works to transfer heat from inside the refrigerator cabinet.
What are the possible causes if I hear a popping or cracking sound when the compressor comes on?
Metal parts undergo expansion and contraction, as in hot water pipes. This is normal. Sound will level off or disappear as refrigerator continues to run.
What are the possible causes if I hear a bubbling or gurgling sound?
Refrigerant (used to cool refrigerator) is circulating throughout the system. This is normal operation.
What are the possible causes of vibrations?
- Check the refrigerator is on a level/even surface.
- Floor is uneven or weak. Refrigerator rocks on the floor when it is moved slightly.
- The refrigerator is touching the wall. Re-level the refrigerator and move it from the wall.
What are the possible causes if moisture forms on the inside refrigerator walls?
- Weather is hot and humid, which increases internal rate of frost build-up. This is normal.
- Door is slightly open.
- Door is kept open too long, or is opened too frequently.
- The door is not sealed properly.
What are the possible causes if moisture forms on the outside of the refrigerator?
Door is slightly open, causing cold air from inside the refrigerator to meet warm moist air from the outside.
What are the possible causes if the doors will not close properly?
- The refrigerator is not on a level surface.
- The gasket/s may be dirty or not properly maintained.
- The storage basket and/or shelves are out of position.
Who do I call for any inquiries?
For any enquiries, please call the CHiQ Cusotmer care on: 1300 796 688.
CLICK HERE TO DOWNLOAD CHIQ CBM432W (01) PDF MANUAL