Free English BOSCH PCP6A.I9 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD BOSCH PCP6A.I9 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What are the components and power ratings of the burners on the BOSCH PCP6A.I9 gas hob?

The components of the BOSCH PCP6A.I9 gas hob and the power ratings of its burners are as follows:

Component Power Rating
A Pan support
B Control knob
C Economy burner 0.90 / 1.00 kW
D Standard-output burner 1.60 / 1.75 kW
E High-output burner 2.80 / 3.00 kW
F Mini-wok multi-crown burner 3.30 / 3.50 kW
G Wok multi-crown burner 3.80 / 4.00 kW

Note: The images shown in the instructions are for guidance only and the specific configuration of burners may vary by model.


What is the intended use of the BOSCH PCP6A.I9 gas hob?

The BOSCH PCP6A.I9 gas hob is intended for cooking purposes only and should be used exclusively for preparing meals and drinks. It is designed for use:

• In a private household and in a domestic environment.

• Up to an altitude of 2000 m above sea level.

Do not use the appliance:

• On boats or in vehicles.

• As a room heater.

• With an external timer or a remote control.

• Outdoors.


What should I do if I smell gas near my BOSCH PCP6A.I9 gas hob?

Escaping gas may cause an explosion. If you smell gas or if there are faults in the gas installation, follow these steps immediately:

► Immediately shut off the gas supply or close the gas cylinder valve.

► Immediately extinguish all naked flames and cigarettes.

► Do not operate any light switches or appliance switches.

► Do not pull any plugs out of any sockets.

► Do not use any telephones or mobile phones within the building.

► Open windows and ventilate the room.

► Call the after-sales service or the gas supplier.


What are the fire safety precautions for using the BOSCH PCP6A.I9 gas hob?

To prevent the risk of fire when using your BOSCH PCP6A.I9 gas hob, observe the following precautions:

• Never leave hot oil or fat unattended.

• Never attempt to extinguish a fire using water; instead, switch off the appliance and then cover with a lid or a fire blanket.

• Never place flammable objects on the cooktop or in its immediate vicinity.

• Never store any objects on the cooktop.

• Do not keep combustible objects or aerosol cans in drawers directly underneath the hob.

• Do not use hob covers, as they can cause accidents due to overheating or shattering.

• Only operate the gas burners with cookware placed on them.

• Keep fabrics (e.g. garments or curtains) away from the flames.

• Never reach over the flames.

• Do not place combustible objects (e.g. tea towels or newspapers) on, next to, or behind the appliance.


What should I do if a burner on my BOSCH PCP6A.I9 does not ignite after 10 seconds?

If a burner fails to ignite after 10 seconds, escaping gas may pose a fire risk. You should:

► Turn the control knob to the “Off” position.

► Open the door or window in the room to ventilate.

► Do not attempt to re-ignite the burner for at least one minute.


How can I avoid burn risks when using the BOSCH PCP6A.I9?

To avoid the risk of burns while operating the BOSCH PCP6A.I9, please follow these safety measures:

• The accessible parts of the hob can become hot during operation. Small children should be kept away from the appliance.

• Never use hob guards, as they may cause accidents.

• Empty cookware becomes extremely hot when set on operating gas burners. Never heat up empty cookware.

• The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.


What should I do if my BOSCH PCP6A.I9 gas hob or its power cord is damaged?

If the appliance or its power cord is damaged, it is dangerous. Follow these steps:

► Never operate a damaged appliance.

► Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

► If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the gas supply.

► Call customer services for repairs.

If the appliance has a fault or is damaged:

► Never switch on the appliance if there is a fault with it.

► If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Shut off the gas supply and call the after-sales service.


How can I prevent material damage to my BOSCH PCP6A.I9 gas hob?

To prevent material damage to your BOSCH PCP6A.I9 gas hob and surrounding area:

• Never cover the stainless steel hob, for example with aluminium foil or oven protectors.

• Only use the accessories specified.

• Cookware that is not the right size, or that is damaged or incorrectly positioned may cause serious injuries.

• Do not use two burners or heat sources to heat one single item of cookware.

• Do not use griddle plates, clay pots, etc. for a long time at full power.

• Do not use a large item of cookware on burners that are close to the control knobs.

• Always turn the control knob to the “Off” position when the appliance is not being used.

• Handle cookware on the hob carefully and do not place heavy objects on it.

• Do not leave acidic liquids, such as lemon juice or vinegar, on the hob.

• If the appliance is in operation for an extended period, open a window or switch on an extractor hood to dissipate heat and moisture.


How can I save energy when cooking with my BOSCH PCP6A.I9 gas hob?

To use less energy while cooking on your BOSCH PCP6A.I9, follow these instructions:

• Choose a burner roughly the same size as your pan. Centre the cookware on the hob.

• Cover saucepans with suitable lids, as cooking without a lid consumes considerably more energy.

• Lift lids as infrequently as possible.

• Use a glass lid so you can see into the pan without having to lift it.

• Use cookware that is suitable for the quantity of food. Large items of cookware containing little food need more energy to heat up.

• Cook with only a little water. The more water that is contained in the cookware, the more energy is required to heat it up.

• Turn down to a lower power level early on.


How do the control knobs on the BOSCH PCP6A.I9 work?

The control knobs on your BOSCH PCP6A.I9 are used to set the flame height to different power levels. The settings are:

  • Symbol with a circle: Burner assigned to the control knob.
  • Symbol with a solid dot (o): Burner off.
  • 9 with a flame symbol: Highest power setting and electric ignition of the burner.
  • 1 with a flame symbol: Lowest power setting.

The control knob is magnetic and removable. To remove it, lift it upwards. To put it back on, press it on at its original position.


What are the parts of a burner on the BOSCH PCP6A.I9?

Each burner on the BOSCH PCP6A.I9 consists of the following parts:

1. Burner cover

2. Burner cup

3. Thermocouple for the flame monitoring

4. Ignition plug


What accessories are available for the BOSCH PCP6A.I9 and how should they be used?

You can use original accessories with your BOSCH PCP6A.I9. The available accessories and their usage are detailed below:

Accessories Description/Image Placeholder Use
Additional wok grid A metal grid for woks.

• Only use on the multi-crown burner.

• Always use for cookware with a rounded base.

• Recommended in order to extend the service life of the appliance.

Additional espresso maker grid A small metal grid.

• Only use on the burner with the lowest power setting.

• Use with cookware with a diameter smaller than 12 cm.

Simmer cap A flat, circular metal cap.

• Secure this above the economy burner cap.

• Use only with the lowest power setting of the burner.

• Place the cookware on the pan support, never directly on the simmer cap.

Simmer plate A circular plate with perforations.

• Use for cooking on a low heat.

• Place it on the pan support with the bumps facing up – never place it directly on the burner.

• Use the economy burner or the standard-output burner. If you have multiple standard-output burners, use the rear burner.


How do I ignite a gas burner on the BOSCH PCP6A.I9?

The BOSCH PCP6A.I9 has automatic ignition. Follow these steps:

1. Press the control knob for the selected burner and turn it anti-clockwise to the highest level (setting 9). Keep the control knob pressed in. For all burners, sparks are generated and the flame ignites.

2. Wait a few seconds and release the control knob. The safety system is now active.

3. Turn the control knob to the required position.

4. If the burner does not ignite, turn the control knob to the off position and repeat the steps described above. This time, hold the control knob down for longer (up to 10 seconds).

ATTENTION! If you turn the control knob directly between position O and 1, malfunctions may occur. For this reason, never turn directly from position O to position 1 or vice versa.


How does the safety system on the BOSCH PCP6A.I9 work?

The safety system (thermocouple) on the BOSCH PCP6A.I9 prevents the flow of gas if the flames accidentally go out. To ignite the burner, you must activate this system.

1. Ignite the burner without releasing the control knob. The flame will ignite.

2. Press and hold the control knob for a further four seconds after ignition to enable the gas flow.


How can I light a burner on my BOSCH PCP6A.I9 during a power cut?

In the event of a power cut, you can light the burners on your BOSCH PCP6A.I9 manually:

1. Press the control knob for the selected burner and turn it anti-clockwise to the highest level.

2. Hold a lighter or a flame (such as from a match) against the burner.


How do I switch off a burner on the BOSCH PCP6A.I9?

To switch off a burner, turn the corresponding control knob clockwise to the ‘o’ (off) position.


What is considered normal behaviour for the BOSCH PCP6A.I9 during operation?

The following behaviours are normal for the BOSCH PCP6A.I9 appliance:

• A slight hissing noise from the ignited burner.

• Release of odours when using the appliance for the first time. These odours will disappear after a short time.

• An orange flame is normal. This is due to dust in the environment, spilled liquids, etc.

• A popping noise a few seconds after the burner is switched off. This is caused by the safety system switching on.


What are the recommended cookware sizes for the burners on the BOSCH PCP6A.I9?

Only use cookware with a suitable diameter that does not protrude over the edge of the hob. The flames must not touch the sides of the cookware. The recommended maximum diameters for the cookware base are:

Burner Maximum diameter of the cookware base
Wok multi-crown burner 30 cm
Mini-wok multi-crown burner 28 cm
High output burner 26 cm
Standard output burner 22 cm
Economy burner 16 cm

Only use cookware with a concave base on the multi-crown burner. The hob must have a multi-crown burner and additional wok grid for this.


What are the recommended power level settings for cooking different meals on the BOSCH PCP6A.I9?

Power level Preparing meals
9

• Bringing water to the boil

• Baking in a bain-marie: Sponge, blancmange, bread pudding.

• Frying at a high temperature: Asian dishes.

7-9

• Starting the cooking process: Pasta, soups, creams, paella, pulses, rice pudding.

• Deep-fat frying in oil: Tempura vegetables, croquettes, chips, potato omelettes, escalope, frozen food, baked items.

• Frying with a little oil: French omelette, steak, well-done sirloin steak, strogonoff.

• Frying, searing: Vegetables, meat.

4-6

• Continuing the cooking process: Pasta, soups, creams, paella, pulses, rice pudding.

• Deep frying with a little oil: Hamburgers, sausages, grilled salmon, rissoles.

• Stew, pot roast: Ragout, goulash, ratatouille.

• Cooking at a medium temperature: Cheese sauce, béchamel, carbonara, Neapolitana sauce, blancmange, crepes.

• Defrosting: Frozen food.

1-3

• Finishing cooking: Paella rice, pulses, rice pudding.

• Steaming: Fish, vegetables.

• Heating and keeping warm: Ready-to-eat meals.

1 • Melting: Butter, chocolate, butter, gelatine, honey, caramel.

How should I clean the different parts of my BOSCH PCP6A.I9 gas hob?

To keep your BOSCH PCP6A.I9 working efficiently, clean it regularly. Allow the appliance to cool down before cleaning. Unsuitable cleaning products may damage the surfaces.

• Do not use harsh or abrasive detergents.

• Do not use steel wool or scouring sponges.

• Do not use a knife or sharp objects to remove dried-on food remnants.

• Do not use steam-cleaning appliances.

Here are the recommended cleaning methods for each part:

Part Recommended cleaning method Notes
Appliance surface Clean using a sponge and soapy water. Use stainless steel cleaner regularly for stainless steel surfaces.

• Wipe up spilled liquids immediately to prevent residues from burning.

• Do not use stainless steel cleaner in the area around the control elements.

Control elements Clean using a damp sponge cloth and hot soapy water.

• The control elements can be removed for easier cleaning.

• Do not clean in the dishwasher or immerse in water.

Pan supports

By hand: Scrub with a non-metallic brush or a non-scratching scouring sponge and soapy water.

In the dishwasher: Clean at a maximum temperature of 60 °C.

• Carefully remove the pan supports.

• Carefully clean the area around the rubber pads.

• The pan supports may discolour during use and cleaning; this does not affect their use.

Burner Scrub with a non-metallic brush or a non-scratching scouring sponge and soapy water.

• Do not clean in the dishwasher.

• Do not mix up the burner lids.

Thermocouples/ignition plugs Clean using a small non-metallic brush.

• Clean carefully as these parts are sensitive.

• Do not moisten the thermocouple and ignition plug. If there is excessive moisture, the burner may not light.


What should I do if the general electrical operation of my BOSCH PCP6A.I9 is impaired?

If the general electrical operation of your BOSCH PCP6A.I9 is impaired, check the following:

The circuit breaker is faulty.
► Check the circuit breaker in the fuse box.

The circuit breaker or one of the residual-current circuit breakers has been triggered.
► In the fuse box, check whether the circuit breaker or one of the residual-current circuit breakers has been triggered.

The mains plug of the power cord is not plugged in.
► Connect the appliance to the power supply.

There has been a power cut.
► Check whether the lighting in your room or other appliances are working.


What should I do if the automatic ignition on my BOSCH PCP6A.I9 is not working?

If the automatic ignition on your BOSCH PCP6A.I9 is not working, try the following solutions:

Food remnants or dirt are located between the ignition plug and the burner.
► Clean the space between the ignition plugs and burners.

Burner parts are wet.
► Carefully dry the burner parts.

The burner parts are positioned incorrectly.
► Correctly position the burner parts.

The appliance is not earthed or has not been connected correctly, or the earth cable is damaged.
► Contact an electrician.


Why is the burner flame on my BOSCH PCP6A.I9 not uniform and how can I fix it?

If the burner flame is not uniform, it could be due to one of these reasons:

The burner parts are positioned incorrectly.
► Correctly position the burner parts.

Openings on the burner are soiled.
► Clean and dry the openings on the burner.


What could cause the burner flames on my BOSCH PCP6A.I9 to be large or unstable?

If the burner flames are large or unstable, the gas may be reaching the appliance at excessive pressure.

1. Switch off the appliance.

2. Contact an approved installer and have them check the regulator of the gas cylinder or liquid gas tank.


What should I do if gas is not flowing normally or at all on my BOSCH PCP6A.I9?

If there seems to be a problem with the gas flow, check for these possible causes:

The gas supply has been shut off by the intermediate valves.
► Open the intermediate valves.

The gas cylinder is empty.
► Replace the gas cylinder.


Why does the burner on my BOSCH PCP6A.I9 switch off as soon as I release the control knob?

If the burner switches off immediately after you release the control knob, try these troubleshooting steps:

Control knob not pressed down long enough.
1. Keep the control knob pressed down for a few seconds after ignition.
2. Press the control knob down firmly.

Openings on the burner are soiled.
► Clean and dry the openings on the burner.


How should I dispose of an old BOSCH PCP6A.I9 gas hob?

Valuable raw materials can be reused by recycling. To dispose of your old BOSCH PCP6A.I9 in an environmentally friendly manner:

1. Unplug the appliance from the mains.

2. Cut through the power cord.

3. Close the main gas tap.

4. Dispose of the appliance as per local regulations. Information about current disposal methods are available from your specialist dealer or local authority.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD BOSCH PCP6A.I9 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.