Free English BABYLISS FX825EBASE (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BABYLISS FX825EBASE (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up the BABYLISS FX825EBASE for charging?
First, remove the charging base from the packaging.
Next, attach your existing adapter that came with your clipper or trimmer into the back of the charging base. Plug the other end of the adapter into the wall outlet.
What should I do if I lose the original adapter for my BABYLISS FX825EBASE?
In case your original adapter is lost, please see an official BaBylissPRO wholesaler to purchase a separate adapter.
How do I know if my clipper or trimmer is correctly charging on the BABYLISS FX825EBASE?
Once the adapter is plugged in, you can place your clipper or trimmer into the opening to begin charging. The LED on your clipper/trimmer unit should slowly blink to ensure your charging has begun.
What precautions should I take when charging my device with the BABYLISS FX825EBASE?
It is important that you do not overcharge your clipper or trimmer as this can cause damage to the battery. If you will not be using the tool for a period of time, it is highly recommended to remove it from the charging base.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD BABYLISS FX825EBASE (01) PDF DOCUMENT