Free English BABYLISS FX726EBASE (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BABYLISS FX726EBASE (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up and use the charging base for my BABYLISS FX726EBASE?
To set up and charge your BABYLISS FX726EBASE, please follow these steps:
1. Remove the charging base from the package.
2. Plug your existing adapter that came with your clipper/trimmer into the back of the charging base.
3. Plug the other end of the adapter into the wall outlet.
4. Once the adapter is plugged in, place your clipper/trimmer into the opening on the base to begin charging.
5. The LED on your clipper/trimmer unit should slow blink to confirm that charging has begun.
What should I do if I lose the original adapter for my BABYLISS FX726EBASE?
In case of loss of the original adapter for your BABYLISS FX726EBASE, please contact an official BaBylissPRO wholesaler to purchase a new adapter.
Are there any important precautions I should take when charging my BABYLISS FX726EBASE?
It is important that you do not overcharge your BABYLISS FX726EBASE, as this can cause damage to the battery. If you are not using the appliance for a long period of time, it is recommended to remove it from the charging base.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD BABYLISS FX726EBASE (01) PDF DOCUMENT