AT&T SAMSUNG GALAXY S7 EDGE (01) PDF MANUAL

Earpiece: Listen to a call.

Front camera: Take self-portraits and record videos of yourself.

Power key: Press and hold to turn the device on or off, restart it, or for quick access to Emergency mode. Press to lock or wake up the screen.

Back: Return to the previous screen or close a dialog box, menu, or keyboard.

Home key/Finger scanner: Return to the Home screen. Activate the Fingerprint security feature.

Recent: Tap to display recent apps, or touch and hold for Multi window.

Volume keys: Adjust the volume of your device’s sounds and audio playback.

Status light: Display a light when the battery is low, charging, or fully charged, when a notification arrives, or when recording voice.

Proximity sensors: Detect the presence of objects near the device.

SIM card/Memory card tray: Install the SIM card and an optional memory card (not included) for storage of files.

Flash: Illuminate subjects in low-light environments when taking a photo or recording video.

Heart rate sensor: Measure your heart rate using your fingertip when using the S Health™ app.

Headset jack: Connect an optional headset.

USB charger/Accessory port: Connect the USB charger (included) and other optional accessories (not included).

Microphone: Record audio and detect voice commands.

Speaker: Play music and other sounds.

Rear camera: Take pictures and record videos.

1. Insert the removal tool into the hole on the SIM card/Memory card tray, and then push until the tray pops out.

2. Place the SIM card on the tray.

Make sure that the card’s gold contacts face down into the device and that the card is positioned as shown.

3. Place the memory card on the tray with the gold contacts facing down.

4. Slide the SIM card/Memory card tray back into the slot.

Warning: Please be careful when handling the SIM card to avoid damaging it. Keep all SIM cards out of reach of small children.

Note: To improve performance and reliability with high-definition video recording and playback, it is recommended you use a memory card (SD card) that is both rated as at least a Class 10 and provides a high read speed.

Caution: Exercise care when using the removal tool to eject the internal SIM card/Memory card tray.

Important: To prevent water and dust from entering the device, remove any dust on the O-Ring and ensure that the SIM card tray is closed tightly.

Caution: If the SIM card is not inserted correctly, the device cannot detect it. Reorient the card and place it back into the slot if the SIM card is not detected.

This device is rated IP68. Follow these tips carefully to prevent damage:

Whenever your device gets wet, dry it thoroughly with a clean, soft cloth.

Do not expose the device to salt water or ionized water, or to water over 5 feet deep for more than 30 minutes. If your device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If the device is exposed to any liquid other than fresh water, rinse the device with fresh water immediately and dry it thoroughly with a clean, soft cloth. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues.

Do not expose the device to water at high pressure, such as ocean waves or a waterfall.

If the device is dropped or receives an impact, the water and dust resistant features of the device may be damaged.

The touchscreen and other features may not work properly if the device is used in water or in other liquids.

Ensure all compartments are closed tightly.

1. Insert the USB cable into the USB charger/Accessory port.

2. Connect the USB cable to the charging head, and then plug the charging head into a standard outlet.

3. Unplug the charging head from the outlet and remove the USB cable from the device when charging is complete.

Note: It is recommended you fully charge the battery before using your device for the first time.

Note: For fastest charging times, use the Adaptive Fast Charging charger that came with your device. This charger provides faster charging only when connected to devices that support Adaptive Fast Charging.

Caution: Use only charging devices and batteries approved by Samsung. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.

Note: This device is also compatible with wireless charging devices approved by Samsung, which are sold separately.

Turn On: Press and hold the Power key until the device turns on.

Turn Off:

1. Press and hold the Power key until the Device options menu is displayed.

2. Tap Power off, and confirm if prompted.

Use Smart Switch™ to transfer contacts, photos, and other content from your old device using the included USB cable and On-the-Go (OTG) connector.

1. Select Smart Switch during setup, or from a Home screen, tap Apps > Settings > Backup and reset > Open Smart Switch.

2. Follow the instructions and select the content to transfer.

Note: Transferring content via a USB cable may increase battery consumption. Make sure your battery is fully charged.

Note: The USB option must be set a Media device (MTP) on the other device.

Visit samsung.com/smartswitch for more information.

Lock the Device: By default, the device locks automatically when the screen times out. To lock it manually, press the Power key.

Unlock the Device: The default Screen lock is Swipe. Press the Power key or Home key, and then drag your finger across the screen.

Note: To choose a more secure screen lock, see Set a Screen Lock in the Lock Screen and Security settings.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accounts > Google.

If you have more than one Google Account set up, tap the account you want to remove.

3. Tap More > Remove account.

Status icons: Displays information like network signal strength, battery level, and time (right side of status bar).

Status bar: Displays device status icons (right) and notification icons (left).

Notification icons: Displays new messages, emails, software updates, etc. (left side of status bar).

Edge screen handle: Reveals the Edge screen.

Widget: Runs as a simple application extension (not a shortcut) on a Home screen.

App shortcuts: Launches your favorite applications.

App folder: Groups multiple apps into a folder.

Home screen indicator: Indicates which Home screen is currently visible.

Primary app shortcuts: Displays these shortcuts on all Home screens.

Apps list: Allows quick access to all of your applications.

To access the Home screen manager, pinch the screen or touch and hold an empty space on a Home screen.

Use these options to manage screens:

Add a screen: Swipe to the end of the screens, and then tap + Add.

Remove a screen: Touch and hold a screen, and then drag it to Remove.

Set a main Home screen: Tap Main Home screen at the top of a screen. This screen is displayed when you press the Home key.

Change the order of screens: Touch and hold a screen, and then drag it to a new position.

Flipboard Briefing: Swipe to the left of the screens to find the Flipboard Briefing screen. Tap On/Off at the top of the screen to enable or disable this feature.

1. From a Home screen, pinch the screen.

2. Tap Wallpapers to customize the Home and Lock screens.

Alternatively, access Wallpaper settings via Apps > Settings > Personal > Wallpaper.

Add a Widget:

1. From a Home screen, pinch the screen.

2. Tap Widgets.

3. Touch and hold a widget, drag it to a Home screen, and release it.

Remove a Widget:

1. From a Home screen, touch and hold a widget to release it.

2. Drag the widget to Remove and release it.

Note: Removing a widget does not delete the widget, it just removes it from the Home screen.

1. From a Home screen, pinch the screen.

2. Tap Themes to customize visual themes for system screens and icons.

Alternatively, access Theme settings via Apps > Settings > Personal > Themes.

1. From a Home screen, pinch the screen.

2. Tap Screen grid.

3. Tap a dimension option (4 x 4, 4 x 5, or 5 x 5) to preview its appearance.

4. Tap Apply to apply the selected dimensions.

Add a Shortcut:

1. From a Home screen, tap Apps.

2. Touch and hold an app shortcut, drag it to a Home screen, and then release it.

Remove a Shortcut:

1. Touch and hold an app shortcut on the Home screen to release it.

2. Drag the app shortcut to Remove and release it.

Note: Removing a shortcut does not delete the app, it just removes the shortcut from the Home screen.

Create a Folder:

1. From a Home screen, touch and hold an app shortcut and drag it on top of another app shortcut until a highlighted box appears.

2. Release the app shortcut to create the folder.

Enter folder name: Enter a name for the folder.

Palette: Change the color.

Add application: Place more apps in the folder. Tap apps to select them, and then tap Add.

3. Tap anywhere outside of the folder to close it.

To add more apps, touch and hold an app shortcut and drag it to the folder.

Remove a Folder:

1. Touch and hold the folder on the Home screen until it detaches.

2. Drag the folder to Remove and release it.

The Status bar at the top of the Home screen provides device information on the right side and notification alerts on the left.

Status Icons:

Notification Icons:

Use the following motions and gestures:

Tap: Lightly tap items to select or launch them (e.g., tap keyboard keys, select an item, launch an app).

Touch and Hold: Touch and hold items on the screen to activate them (e.g., move a widget, display a pop-up menu).

Drag: Touch and hold an item, and then move it to a new location (e.g., drag an app shortcut or widget).

Pinch and Spread: Pinch the screen using your thumb and forefinger or spread by moving your fingers apart.

Pinch to zoom out (viewing picture/web page).

Spread to zoom in (viewing picture/web page).

Swipe: Lightly drag your finger vertically or horizontally across the screen (e.g., unlock the device, scroll through Home screens or menus).

More: Tap to view more menu options for a screen (often allows selecting items to delete or share).

Delete: Tap to select items to delete.

Share: Tap to select items to share, and a sharing method.

Edit: Tap to customize the screen.

On/Off button: Tap to turn the option on or off.

Checkbox: Tap to enable or select. When enabled, a checkmark is displayed. You can often tap a checkbox at the top of the screen to select all.

Menu: Tap to view available options for the field.

View the Panel: Drag the Status bar down from any Home screen.

View Notification Details: Swipe down the list. Tap an item to open it.

Clear Notifications: Drag a single notification left or right to clear it. Tap Clear to clear all notifications.

Close the Panel: Drag upward from the bottom of the screen or tap Back.

Access Features:

Settings: Tap the gear icon to display the Settings screen.

View all Quick settings: Tap ‘View all’ to see all Quick settings.

Clear notifications: Tap ‘CLEAR’ to clear all notifications.

Notification settings: Tap ‘NOTIFICATION SETTINGS’ to enable/disable notifications per app.

Notification card: Shows details about a notification.

Quick connect: Tap to search for nearby devices to connect with.

Screen brightness: Adjust screen brightness slider.

Quick settings: Tap icons to quickly enable or disable features (e.g., Wi-Fi, Location, Sound).

View Additional Quick Settings:

1. Drag the Status bar down.

2. Swipe left or right across the visible Quick setting icons.

Customize Quick Settings Display:

1. Drag the Status bar down.

2. Tap View all, and then tap Edit.

Quick settings: Drag the icons to change their positions. The first ten icons appear on the Notification panel.

Quick connect: Tap On/Off to show or hide this feature on the Notification panel.

Quick Connect searches for nearby devices automatically to connect quickly.

1. Drag the Status bar down to display the Notification panel.

2. Tap Quick connect. Your device scans for compatible devices.

Use ‘Scan for nearby devices’, ‘Refresh’, or ‘More’ (for Settings, About, Help).

3. Tap a device from the list and select an option:

Share content: Choose a file to share.

Share Wi-Fi profile: Share available Wi-Fi profiles.

To disconnect from a device:

1. Drag the Status bar down.

2. Tap Quick connect.

3. Tap Disconnect next to a paired device.

Multi Window allows using multiple applications at the same time in a split screen view.

Activate Multi Window:

1. From any screen, touch and hold Recent.

2. Tap two apps that support Multi window to open them in split screen view.

Or, if you are currently using an app that supports Multi window, tap another supported app to add it in split screen view.

Launch Recently Used Apps in Multi Window:

1. Tap Recent. Apps supporting Multi window have a Multi window icon in their title bar.

2. Tap the Multi window icon in the title bar to launch an app in split screen view.

3. Tap another app icon below to add it to the split screen view.

Note: Multi window is not available for all apps. Only applications that support Multi window have the Multi window icon.

Select an app window, and then tap the Window controls (circle) in the middle of the window border.

Controls:

Switch windows: Switch locations between Multi window apps.

Drag and drop content: Move items between the app windows. Drag an item to share from one window to another. (Not all applications support this feature).

Minimize window: Minimize the selected app window into a circular, movable icon that can be opened by tapping on it.

Maximize window: Open the selected app window in full screen view.

Close app: Close the selected app.

Edge panels provide access to apps, tasks, contacts, news, sports, and other information.

View Edge Panels: When the screen is turned on, swipe the Edge panel handle from the edge of the screen to the center. Keep swiping to view other panels.

Configure Edge Panels: From any screen, open the Edge screen, and then tap Settings. See Edge Panels settings for more information.

The Apps edge panel lets you add up to ten apps in two columns.

View Apps Edge: When the screen is on, swipe the Edge panel handle towards the center. Keep swiping until the Apps edge panel is displayed.

Configure Apps Edge:

1. Open the Edge screen and swipe until the Apps edge panel is displayed.

2. Tap + Add to add more apps.

To add an app: Find it on the left and tap it to add it to an available space on the right.

To change order: Drag each app to the desired location on the right.

To remove an app: Tap Remove.

To change columns: Tap Add column to switch between one or two columns.

3. Tap Back to save changes.

The Tasks edge panel lets you add shortcuts to common tasks (up to ten tasks in two columns).

View Tasks Edge: When the screen is on, swipe the Edge panel handle towards the center. Keep swiping until the Tasks edge panel is displayed.

Configure Tasks Edge:

1. Open the Edge screen and swipe until the Tasks edge panel is displayed.

2. Tap + Add to add more tasks.

To add a shortcut: Find it on the left and drag it to an available space on the right.

To change order: Drag each task to the desired location on the right.

To remove a task: Tap Remove.

To change columns: Tap Add column to switch between one or two columns.

3. Tap Back to save changes.

People edge lights up the Edge screen with distinct colors for notifications from contacts in your My people list and allows quick communication.

View People Edge: When the screen is on, swipe the Edge panel handle towards the center. Keep swiping until the People edge panel is displayed.

Configure People Edge:

1. Open the Edge screen and swipe until the People edge panel is displayed.

2. Tap + Add to add more contacts.

To remove a contact: Touch and hold the contact and drag it to Remove.

To change order: Drag each contact to the desired location.

3. Tap OnCircle to communicate using images, stickers, etc.

4. Tap Back to save changes.

Enter text using the QWERTY keyboard layout.

Predictive Text: Suggests words that match your text entries and can automatically complete common words. It learns your writing style from contacts, messages, email, and social networking sites.

Special Keys:

Sym (Symbol): Tap to insert symbols.

Touch and hold Options key (gear icon):

Voice input: Enter text using Google voice™ typing.

Clipboard: Access the clipboard.

Emoticon: Insert an emoticon at the cursor position.

Keyboard settings: Access keyboard settings.

Note: Available options depend on the app in use. Not all options are available for all apps.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Samsung keyboard for options.

Enter text by speaking instead of typing.

Enable Google Voice Typing:

1. Tap Voice input on the Samsung keyboard. (You may need to touch and hold the Options key, left of the Space bar, to find it).

2. Speak your text when prompted “Speak now”.

Note: Tap Settings > Languages within the voice input interface to download additional languages.

Configure Google Voice Typing:

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Google voice typing for options.

Changing the screen color to grayscale.

Restricting application usage to essential apps and those you select.

Turning off Mobile data when the screen is off.

Turning off connectivity features like Wi-Fi and Bluetooth®.

Note: When Emergency mode is turned off, Location settings may stay as they were in Emergency mode.

Activate Emergency Mode:

1. Press and hold the Power key to display the Device options window.

2. Tap Emergency mode > Turn on.

If accessing for the first time, read the Terms and conditions, tap the Checkbox if you accept, tap Agree, and confirm when prompted.

Turn Off Emergency Mode:

From the Emergency mode Home screen, tap More > Turn off Emergency mode.

The following apps and features are available on the Home screen in Emergency mode:

Flashlight: Use the device’s flash as a steady light source.

Emergency alarm: Sound an audible siren.

Share my location: Send location information to emergency contacts.

Phone: Launch the call screen.

Internet: Launch the Web browser.

+ Add: Add other available apps (e.g., Facebook, Maps).

Battery percentage: Display estimated battery charge remaining.

Estimated usage time remaining: Display estimated standby time based on current charge and usage.

Emergency call: Dial the emergency number (e.g., 911), possible even without activated cellular service.

More:

Turn off Emergency mode: Return to standard mode.

Remove: Choose apps to remove from the Emergency mode screen.

Manage emergency contacts: Add contacts for Safety Assistance.

Settings: Configure available settings (limited options enabled).

The Phone screen provides access to the dialer keypad, recent calls, favorites, and contacts.

Tabs: Display Log (dialed, received, missed calls), Favorites (marked contacts), Contacts (list to select and call).

Keypad: Dial the number you want to call.

More options: Access Speed dial and Call settings.

Hide the keypad: Hide the keypad and display recent calls.

Video call: Make video calls.

Call: Make a voice call.

Voicemail: Set up and check your voicemail.

Using the Keypad:

1. From a Home screen, tap Phone.

2. Tap Keypad if it’s not displayed.

3. Enter a number on the keypad and tap either Dial (voice call) or Video call.

From Contacts List:

1. From a Home screen, tap Apps > Contacts, or tap Phone > Contacts.

2. Swipe your finger across a contact to the right to call the contact.

From Recent Calls (Call Log):

1. From a Home screen, tap Phone.

2. Tap Log.

3. Tap a contact or number, and then tap Call.

1. From a Home screen, tap Phone.

2. Enter a number and tap Video call.

Note: Not all devices support video calling. The recipient has the option to accept the video call or answer it as a regular voice call.

On the Incoming Call Screen:

Drag Answer (green icon) to the right to answer.

Drag Video answer to the right to answer as a video call.

Drag Reject (red icon) to the left to reject the call and send it to voicemail.

Drag Reject call with message upward and select a message to reject with a text message.

On the Incoming Call Pop-up (while using an app):

Tap Answer to answer the call.

Tap Reject to reject the call and send it to voicemail.

Tap Reject call with message and select a message.

Tap Expand to exit the app and view the main incoming call screen.

Adjust Call Volume: Press the Volume keys up or down. Or, tap Extra volume to quickly boost the incoming audio volume.

Use Speakerphone or Bluetooth: Tap Speaker to use the speakerphone. Tap Bluetooth to use a connected Bluetooth headset.

If your service plan supports this:

1. From the active call screen, tap Add call.

2. Dial the new number and tap Dial.

3. When the second call is answered:

Tap Swap to switch between the two calls.

Tap Merge to conference both callers together.

If your service plan supports this feature, you’ll hear a tone when another call comes in while you’re already on a call.

To answer the waiting call:

1. Drag Answer in any direction.

2. Tap an option:

Put [caller] on hold: Place the current call on hold to answer the new one.

Merge with [caller]: Add the new caller to the current call (conference).

End call with [caller]: End the current call and answer the new one.

3. If you put the first call on hold, tap the ‘On hold’ number entry and select Swap to switch between calls.

Show me / Hide me: Turn your camera on or off (option depends on current state).

Voice call: Change the video call to a voice-only call.

Cancel: Do not change the call type.

Blocking a number sends future calls directly to voicemail and prevents messages from being received.

1. From a Home screen, tap Phone > Log.

2. Tap the caller you want to add to the Block list.

3. Tap More > Block/unblock number:

Call block: Tap On/Off to block calls from this number.

Message block: Tap On/Off to block messages from this number.

4. Tap OK to save your changes.

You can also manage the Block list via Phone > More > Settings > Call blocking > Block list.

Assign a shortcut number (2-100) to a contact for quick dialing.

Create a Speed Dial:

1. From a Home screen, tap Phone.

2. Tap Keypad if needed.

3. Tap More > Speed dial.

4. Tap an unassigned number (+ Add contact). Number 1 is reserved for Voicemail.

5. Tap a contact to assign to the number.

Use Speed Dial:

1. From a Home screen, tap Phone.

2. Tap Keypad if needed.

3. Touch and hold the assigned Speed dial number.

If the number is more than one digit, enter the first digits, then touch and hold the last digit.

You can dial the emergency number (e.g., 911 in North America) regardless of cellular service status, even if the phone isn’t activated.

From the Phone App (Unlocked):

1. From a Home screen, tap Phone.

2. Enter the emergency number (911) and tap Dial.

3. Complete your call. Most in-call features are available.

From a Locked Screen (Swipe Lock):

1. Drag Phone upward, OR swipe the screen to unlock and tap Phone.

2. Enter 911 and tap Dial.

3. Complete your call.

From a Locked Screen (Secure Lock – PIN, Pattern, etc.):

1. Drag Phone upward.

2. Tap Emergency call.

3. Enter 911 and tap Dial.

4. Complete your call. Only emergency calling features are accessible; the rest of the phone remains secured.

Note: The first step for locked screens might differ based on device and lock screen settings.

From Your Device:

1. From the Home screen, tap Phone > Voicemail (icon).

2. You may be prompted to enter your password.

3. Follow the voice prompts from the voicemail center.

From Another Phone:

1. Dial your wireless phone number.

2. Wait until you hear your voicemail greeting.

3. Press the asterisk (*) key on the phone you are using.

4. Enter your password when prompted.

Visual Voicemail allows you to:

Review and manage voicemail messages directly from your phone without dialing in.

See a list of your messages and choose which ones to play, call back, forward, delete, or save, in any order.

To get started:

1. From the Home screen, tap Apps > Visual Voicemail.

2. Read the instructions.

Play Store: Download new apps from the Google Play store. Visit play.google.com/store/apps to learn more.

Galaxy Apps: View and download Samsung apps optimized for Galaxy devices. Visit samsung.com/levant/apps/mobile/galaxyapps to learn more.

You can uninstall apps you downloaded. Preloaded apps cannot be uninstalled but can often be disabled (turned off and hidden).

To uninstall or disable:

1. From a Home screen, tap Apps.

2. Tap Edit.

3. Apps that can be uninstalled or disabled will display an Uninstall/Disable icon (minus sign or similar).

4. Tap the Uninstall/Disable icon on the app you want to remove/disable and follow the prompts.

Change Custom Order:

1. From a Home screen, tap Apps > Edit.

2. Touch and hold an app shortcut or folder, then drag it to a new location.

3. Tap Done when finished.

Alphabetize Apps:

1. From a Home screen, tap Apps > A-Z.

2. Tap Save.

Create a Folder:

1. From a Home screen, tap Apps > Edit.

2. Touch and hold an app shortcut, then drag it on top of another app shortcut until a highlighted box appears.

3. Release the app shortcut to create the folder.

Enter folder name: Name the folder.

Palette: Change the folder color.

+ Add application: Tap apps to select them, then tap Add to place more apps in the folder.

4. Tap anywhere outside the folder to close it.

To add more apps later: Touch and hold an app shortcut and drag it into the folder.

5. Tap Done when finished editing.

Launch Apps in a Folder:

Tap the folder, then tap an app shortcut inside it.

Delete a Folder:

1. From a Home screen, tap Apps > Edit.

2. Tap the folder to delete.

3. Tap Delete folder. Confirm when prompted.

4. Tap Done when finished.

To configure the Edge feeds:

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Edge screen > Edge feeds.

3. Tap On/Off to activate the Edge feeds feature.

Configure the following options:

• Download: Search for and download more Edge feeds from Galaxy Apps.

• Reorder: Change the order of the panels by dragging them to the left or right.

• Checkbox: Enable or disable each feed.

• Feed name: See the name of a feed by tapping the middle of the panel.

• Edit (if available): Configure a feed.

• Edge feed timeout: Configure how long the Edge screen stays on when activated.

4. Tap Back to save changes.

Quick reply allows you to reject an incoming phone call with a text message by placing your finger on the heart rate sensor for two seconds. The call is rejected, and a preset message is sent to the caller.

To turn on and configure Quick reply:

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Edge screen > Edge lighting > Quick reply.

3. Tap On/Off to enable Quick reply.

4. Tap the message to edit the text reply.

5. Tap Back to save changes.

Edge lighting illuminates the Edge screen when a notification is received. If People edge is also on, the color of the indicator is the one assigned to the contact who is calling or messaging. Edge lighting and Quick reply activate when your device is turned over (display side down).

To turn on Edge lighting:

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Edge screen > Edge lighting.

3. Tap On/Off to turn on the feature.

You can view the current software version and license information for the Edge screen feature.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Edge screen > About Edge screen.

Manage useful features while you play games.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Advanced features > Games.

3. Tap On/Off to enable or disable the following:

• Game launcher: Automatically arranges all your games in one place.

• Game tools: When enabled, a button floating over top of your game provides convenient game features, such as No alerts during game, Minimize and alive, Screenshot, and Record. Game tools can also access your Contacts, Storage, Microphone, and Camera.

Change the screen layout to accommodate operating your device with one hand.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Advanced features > One-handed operation.

3. Tap On/Off to enable or disable the following:

• Reduce screen size: Press the Home key three times in quick succession to reduce the size of the display.

• One-handed input: Adjust the size and position of the keyboard and other input methods for easier input with one hand.

Configure other useful features. For example, you can control certain device actions by picking up the device and by touching the screen with the palm of your hand or turning over the device.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Advanced features.

3. Tap On/Off to enable each of the following:

• Quick launch camera: Open the Camera by quickly pressing the Home key twice.

• Pop-up view gesture: View an app in pop-up view by swiping downwards diagonally from either corner at the top of the screen while the app is open and shown on the screen.

• Smart capture: Capture an image of any scrollable areas of the screen that are currently hidden, as well as the area that is visible, and crop and share the screenshot immediately.

• Palm swipe to capture: Capture an image of the screen by swiping the edge of your hand across it, from side to side, keeping in contact with the screen.

• Direct call: Call the contact whose call log, message, or contact details are currently on the screen by bringing the device close to your ear.

• Smart alert: Set the device to vibrate when you pick it up to notify you about missed calls and messages.

• Easy mute: Mute sounds and video by covering the screen or turning over the device.

If have disabled apps, you can choose whether to display them.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Applications > Application manager.

3. If you have disabled applications:

• Tap All apps at the top left of the screen.

• Tap All apps, Enabled, or Disabled.

4. Tap More for the following options:

• Show/Hide system apps: Show or hide system (background) apps.

• Apps that can appear on top: Choose apps that can run on top of other running apps.

• Change system settings: Select which apps can change system endings.

• Reset app preferences: Reset options that have been changed. Existing app data is not deleted.

Note: Options vary by application.

You can view and update information about an application, including memory usage, default settings, and permissions.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Applications > Application manager.

3. Tap an application to view and update information about the application. The following options are displayed:

• Uninstall/Disable: Uninstall or disable the application. Preloaded apps can only be disabled.

• Force stop: Stop an app that is misbehaving. Restart your device if stopping an app, process, or service causes your device to stop working correctly.

• Storage: Manage the app’s storage usage.

• Data usage: View mobile data usage.

• Permissions: View permissions granted to the app for access to your device’s information.

• Notifications: Configure notifications from the app.

• Set as default: Set the app as a default for a certain category of apps.

• Battery: View battery usage since the last full charge.

• Memory: View memory usage.

If you have multiple applications of the same type, such as email apps, you can select one app to be the default.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Applications > Default applications.

3. Tap the following to choose default apps:

• Browser app: Choose a default browser app.

• Calling app: Choose a default calling app.

• Messaging app: Choose a default messaging (text and multimedia) app.

• Set as default: Choose default apps for other functions.

• Home screen: Choose a Home screen type.

• Device assistance app: Choose an app that provides assistance for using your device.

Shortcuts to the settings for various apps are available in one convenient location.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Applications.

3. Tap one of the following to display the settings for the selected app:

• Calendar

• Camera

• Contacts

• Email

• Internet

• Messages

• Phone

• S Voice app

• Weather

• Google

Change the look of the Home and Lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.

To change wallpaper:

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Wallpaper.

3. Tap Home screen, Lock screen, or Home and lock screen.

4. Tap an image to preview it, and then tap Set as wallpaper.

• Tap Wallpaper motion effect to allow the wallpaper to shift slightly as you move the device.

• Tap From Gallery for additional wallpapers.

Set the theme to be applied to your Home and Lock screens, wallpapers, and app icons. You can apply a theme to your Home or Lock screen.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Themes.

• Tap a theme to view a preview of various screens.

• Tap More themes to download additional themes from the Theme Store with your Samsung account.

3. Tap Apply to apply the selected theme.

Customize your Home screen by adding application shortcuts, widgets, folders, and using wallpapers.

To customize Home screen:

• From a Home screen, tap Apps > Settings > Personal > Home screen.

– or –

• From a Home screen, either tap and hold an empty space on a screen or pinch the screen.

For more information, see Home Screen.

It is recommended that you secure your device using a Screen lock.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Screen lock type to select a screen lock and level of security:

• Swipe: Swipe the screen to unlock it. This option provides no security.

• Pattern: Create a pattern that you draw on the screen to unlock your device. This option provides medium security.

• PIN: Select a PIN to use for unlocking the screen. This option provides medium to high security.

• Password: Create a password for unlocking the screen. This option provides high security.

• None: Never use a Lock screen.

• Fingerprints: Use fingerprint recognition to unlock the screen. This option provides medium to high security.

3. Select your notification preferences, if you choose a secured lock screen option:

• Show content

• Hide content

• Do not show notifications

4. Tap Set up to set up and use fingerprints to unlock the device in addition to a PIN, pattern, or password. Tap Later to skip fingerprints setup.

5. Choose a screen lock option:

• Info and app shortcuts: Display a dual clock, or information such as the weather, on the Lock screen.

• Notifications on lock screen: Show notifications on the Lock screen.

• Secure lock settings: Set your secure lock functions such as Secured lock time, and Smart lock. This option is not available with Swipe.

Note: Options vary based on the screen lock type.

You can register up to three fingerprints. A password is also set up as an alternative to your fingerprint.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Fingerprints.

• To add a fingerprint, tap + Add fingerprint and follow the prompts to register a fingerprint and password. You must set a pattern, PIN, or password to protect your fingerprints.

• To rename a fingerprint, tap the fingerprint, enter a new name, and then tap Rename.

• To delete a fingerprint, touch and hold the fingerprint, and then tap Remove.

Fingerprint verification can be used for other accounts accessed from your device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Fingerprints.

• Web sign-in: Access your online accounts using your fingerprint.

• Verify Samsung account: Verify your identity using your fingerprint when logging in to your Samsung account.

• Use with Samsung Pay: Use your fingerprint for secure and fast payments with the Samsung Pay app.

• Fingerprint unlock: Tap the On/Off switch to enable or disable fingerprint security.

Protect your device from loss or theft allowing your device to be locked, tracked, and for your data to be deleted remotely. To access your device remotely, visit findmymobile.samsung.com.

Note: You must sign up for a Samsung account and enable Google location service to use Find My Mobile.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Find My Mobile.

3. Enter your Samsung account password or, if you are not logged in to your Samsung account, tap Add account and follow the prompts. The following options are available:

• Remote controls: Allows you to access your device remotely.

• Google location service: Activate or deactivate Google location service. This service must be on in order to find your device.

• SIM change notification number: Prevent unauthorized changes to your SIM card by being alerted whenever an app or service attempts to change data on your SIM card.

Enable installation of non-Google Play applications.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Unknown sources to enable this option.

Warning: Enabling installation of third-party applications can cause your device and personal data to be more vulnerable to attacks by unknown sources.

Require a numeric PIN or password to decrypt your device each time you power it on.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Protect encrypted data and follow the prompts to encrypt all data on your device.

Require a numeric PIN or password to decrypt your SD card (not included) when you first access it after powering on your device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Encrypt SD card.

3. Tap Encrypt SD card and follow the prompts to encrypt all data on your memory card.

Protect your device from being reset accidentally by requiring a special password before it can be reset to its factory defaults.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings.

3. Tap Set up/change password and follow the prompts.

Require both your SIM card PIN and your ordinary screen lock type when unlocking the device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings > Set up SIM card lock and follow the prompts.

3. Tap Lock SIM card to enable the feature.

4. Tap Change SIM card PIN to create a new PIN.

Display password characters briefly as you type them.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings > Make passwords visible to turn the feature on.

Automatically receive security updates.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings for the following Security update service options:

• Security policy updates: Automatically or manually check for security policy updates.

– Automatic updates can also be limited to only when your device is connected to a Wi-Fi network.

• Send security reports: Use Wi-Fi to send security reports to Samsung for threat analysis.

Manage your device administrators and application installation privileges.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security Settings > Device administrators.

• Tap Android Device Manager to allow it to lock or erase a lost device.

Manage your security certificates. If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings for the following Credential storage options:

• Storage type: Select a storage location for credential contents.

• View security certificates: Display certificates in your device’s ROM and other certificates you have installed.

• User certificates: View user certificates.

• Install from device storage: Install a new certificate from storage.

• Clear credentials: Erase the credential contents from the device and reset the password.

Use these options to configure advanced security settings.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Lock screen and security > Other security settings for the following advanced options:

• Trust agents: Perform selected actions when trusted devices are connected.

– To view Trust agents, set up a secured screen lock (Password, PIN, Pattern, or Fingerprints). For more information, see Set a Screen Lock.

• Pin windows: Pin an app on your device screen, preventing access to other features of your device.

• Usage data access: View the applications that can access your device’s usage history.

• Notification access: View the applications that can access notifications you receive on your device.

• Do not disturb permission: View which apps have permission to change the Do not disturb settings.

Before using any features that require location assistance, you must enable your device’s location services.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Location.

3. Tap On/Off to turn on Location services.

4. Tap Locating method to select how your location is determined:

• GPS, Wi-Fi, and mobile networks: Use GPS, Wi-Fi, and mobile networks.

• Wi-Fi and mobile networks: Use Wi-Fi and mobile networks (no GPS).

• GPS only: Use GPS only.

Follow steps 1-3 in “How do I configure the Locating Method for location services?”. Then:

5. Tap Improve accuracy to use other connections for determining your location:

• Wi-Fi scanning: Allow apps and services to scan for Wi-Fi networks automatically, even when Wi-Fi is turned off.

• Bluetooth scanning: Allow apps to scan for and connect to nearby devices automatically through Bluetooth, even when Bluetooth is turned off.

Apps that have requested your location are listed under Recent location requests.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Location.

3. Tap On/Off to turn on Location services.

4. Tap an entry under Recent location requests to view the app’s settings.

Google uses Location History to store and use your device’s most recent location data. Google apps, such as Google Maps, can use this data to improve your search results based on places that you have visited.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Location.

3. Tap On/Off to turn on Location services.

4. Tap Google location history and sign in to your Google Account for more options.

Control which apps have permissions to use certain features of your device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > App permissions.

3. Tap the following features to see which apps have permission to access them:

• Body sensors

• Calendar

• Camera

• Contacts

• Location

• Microphone

• Phone

• SMS

• Storage

• Additional permissions

4. Tap On/Off next to each app to enable or disable permissions for that feature.

This feature sends diagnostic information about your device when you are having technical problems.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Report diagnostic info.

3. Read the consent information, and then tap Yes to enable this feature or tap No thanks.

Send a quick alert to your primary contacts when you are in an emergency situation.

Setup:

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Send SOS messages.

3. Tap On/Off to turn the feature on and configure the following options:

• Send messages to: Add recipients by creating new contacts or selecting from Contacts.

• Attach pictures: Send pictures to your emergency contacts.

• Attach audio recording: Send a short audio message to your emergency contacts.

To send a help message:

• Press the Power key quickly three times.

Hide personal content from being accessed by anyone else using your device. Private mode is only available for certain applications.

Note: A secure screen lock (Pattern, PIN, Password, or Fingerprint) is required to use Private mode.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Privacy and safety > Private mode.

3. Tap On/Off to enable Private mode.

4. Follow the prompts to learn about and set up Private mode.

Switch between the default screen layout and a simpler layout. The Easy mode layout has larger text and icons, making for a more straightforward visual experience.

To enable Easy mode:

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Easy mode.

3. Tap Easy mode to enable this feature.

• When Easy mode is enabled, you can swipe down the page and select which apps you want to display on the Home screens.

4. Tap the apps you want to add or remove.

5. Tap Done to save your settings.

To disable Easy mode:

1. From a Home screen, tap Settings > Personal.

2. Tap Easy mode > Standard mode to exit Easy mode.

3. Tap Done to confirm.

Accessibility services are special features that make using the device easier for those with certain physical disabilities.

Note: You can download additional accessibility applications from the Google Play store.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accessibility for options.

• Voice assistant: Give spoken feedback aloud to assist blind and low-vision users. (Can collect text input except passwords, log UI interactions. Turn on/off via triple-press Home key).

• Voice assistant help: View help on using Voice Assistant.

• Dark screen: Keep the screen turned off at all times for privacy.

• Rapid key input: Release your finger to enter selection instead of double tapping.

• Speak passwords: Read the characters aloud as you enter your passwords.

• Text-to-speech: Set your preferred TTS engine and options. See Text-to-Speech Options.

• Accessibility shortcut: Quickly enable accessibility features in two quick steps.

• Voice label: Write voice recordings to NFC tags to provide information about nearby objects.

• Font size: Set the font size.

• High contrast fonts: Adjust the color and outline of fonts to increase the contrast with the background.

• High contrast keyboard: Adjust the size of the Samsung keyboard and change its colors to increase the contrast between the keys and the background.

• Show button shapes: Show buttons with shaded backgrounds to make them stand out.

• Magnifier window: Magnify content shown on the screen.

• Magnification gestures: Use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen.

• Grayscale: Change all colors to gray.

• Negative colors: Reverse the display of colors from white text on a black background to black text on a white background.

• Color adjustment: Adjust the color of the screen if you are color blind or have difficulty reading the display because of the screen color.

• Sound detectors: Give an alert when a crying baby or a doorbell is detected.

• Flash notification: Set your camera light to blink whenever you receive a notification.

• Turn off all sounds: Turn off all notifications and audio for privacy.

• Hearing aids: Improve the sound quality for use with hearing aids.

• Samsung subtitles (CC): Use Samsung subtitles with multimedia files when available.

• Google subtitles (CC): Use Google subtitles with multimedia files when available.

• Left/right sound balance: Use the slider to set the left and right balance when using a stereo device.

• Mono audio: Switch audio from stereo to mono for use with one earphone.

• Universal switch: Control your device with your customized switches.

• Assistant menu: Improve the device accessibility for users with reduced dexterity.

• Easy screen turn on: Wake up your device by waving your hand over the sensor.

• Press and hold delay: Select a time interval for this action.

• Interaction control: Block areas of the screen from touch interaction. Disable auto screen rotation and hard key functions. Only show application notifications in the Notification panel and the Status bar.

• Direction lock: Unlock the screen by swiping in a series of four to eight directions.

• Direct access: Open your accessibility settings by pressing the Home key quickly three times in succession.

• Notification reminder: Beep at set intervals to remind you of any unread notifications.

• Answering and ending calls: Select shortcuts for answering and ending calls.

• Single tap mode: Tap to stop/snooze alarms and calendar events.

• Manage accessibility: Export your accessibility settings and share them with another device.

You can add and manage all your email, social networking, and picture and video sharing accounts.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accounts > + Add account.

3. Tap one of the account types.

4. Follow the prompts to enter your credentials and set up the account.

You can synchronize your calendar, contacts, and other types of accounts. Depending on the account, you can choose to synchronize your calendar, contacts, and other types of content.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accounts > [Account type].

3. Tap an account to view the sync settings for that account.

4. Tap individual data items to sync.

5. Tap More > Sync all or Sync now to synchronize the account.

Note: Sync options and the location of the sync command differ depending on the account type.

Each account has its own set of settings. In addition, you can configure common settings for all accounts of the same type.

Note: Account settings and available features vary between account types and service providers. Contact your service provider for more information on your account’s settings.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accounts > [Account type].

3. Tap an account to configure that account’s sync settings.

4. Tap other available options for the account type.

You can remove accounts from your device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Accounts > [Account type].

3. Tap the account and then tap More > Remove account.

Transfer content from your old device to this device.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Backup and reset > Open smart switch, and then follow the prompts.

Enable backup of your information to Google servers.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Backup and reset for options:

• Back up my data: Enable back up of application data, Wi-Fi passwords, and other settings to Google servers.

• Backup account: Select a Google Account to be used as your backup account.

• Automatic restore: Enable automatic restoration of settings from Google servers. When enabled, backed-up settings are restored when you reinstall an application.

You can reset your device to its factory default settings, which resets everything except the security, language, and account settings. Personal data is not affected.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Backup and reset > Reset settings.

3. Tap Reset settings, and confirm when prompted.

You can reset Wi-Fi, Mobile data, and Bluetooth settings with Reset network settings.

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Backup and reset > Reset network settings.

3. Tap Reset settings, and confirm when prompted.

You can reset your device to factory defaults, erasing all data from your device. This action permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, as well as your music, photos, videos, and other files. Any data stored on an external SD card is not affected.

Note: When you sign in to a Google Account on your device, Factory Reset Protection is activated. This protects your device in the event it is lost or stolen. If you reset your device to factory default settings with the Factory Reset Protection (FRP) feature turned on, you must enter the user name and password for a registered Google Account to regain access to the device. You will not be able to access the device without the correct credentials.

Warning: If you reset your Google Account password, you must wait 72 hours after changing your password to perform a factory data reset on your device.

Before resetting your device:

1. Verify that the information you want to keep has transferred to your storage area.

2. Log in to your Google Account and confirm your user name and password.

To reset your device:

1. From a Home screen, tap Apps > Settings > Personal.

2. Tap Backup and reset > Factory data reset.

3. Tap Reset device and follow the prompts to perform the reset.

4. When the device restarts, follow the prompts to set up your device.

You can select a default language for your device’s menus and keyboards.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Language.

3. Select a language from the list.

You can select a default keyboard for your device’s menus and keyboards.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Default keyboard.

3. Select a keyboard.

Note: Additional keyboards can be downloaded from the Google Play store.

Configure options for using the Samsung keyboard.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Samsung keyboard for options:

• English(US): Set the keyboard type: Qwerty keyboard or 3×4 keyboard.

• + Add input languages: Choose which languages are available on the keyboard. To switch between languages, slide the Space bar sideways.

• Predictive text: Predictive text suggests words that match your text entries, and can automatically complete common words. Predictive text can learn your personal writing style from your contacts, messages, Gmail, and social networking sites—improving its accuracy of predicting your text entries.

• Additional keyboard settings provide assistance with capitalization, punctuation, and much more.

Speak rather than type your text entries using Google voice typing.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Google voice typing for options:

• Languages: Select languages for Google voice typing.

• “OK Google” detection: Launch a Google search whenever you say “OK Google”.

• Now on tap: Get info based on the current app screen when searching by voice or holding down the Home key.

• Hands-free: Allow requests with the device locked.

• Speech output: Select options for spoken feedback.

• Offline speech recognition: Download and install speech recognition engines, allowing you to use voice input while not connected to the network.

• Block offensive words: Hide search results that contain offensive words.

• Bluetooth headset: Use audio input from a Bluetooth headset (not included) if one is connected.

Configure your Text-to-Speech (TTS) options. TTS is used for various accessibility features, such as Voice Assistant.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Text-to-speech for options:

• Preferred TTS engine: Choose either the Samsung or Google Text-to-speech engine. Tap Settings next to each TTS engine for options.

• Speech rate: Set the speed at which the text is spoken.

• Default language status: Display the default language in use.

Configure pointer speed for an optional mouse or trackpad (not included).

1. From a Home screen, tap Apps > Settings > System.

2. Tap Language and input > Pointer speed.

3. Drag the slider to the right to go faster or to the left to go slower.

4. Tap OK to save your setting.

View how battery power is used for device activities.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Battery for options:

• Power saving mode: Save battery power by limiting your device’s performance, limiting vibration feedback, and restricting location services and most background data.

• Ultra power saving mode: Save battery power by applying a simplified grayscale theme to your Home screen and limiting the number of usable apps.

• Fast cable charging: Charge the battery more quickly.

• Display battery percentage: Display the battery charge percentage next to the battery icon on the Status bar.

• Past and predicted usage: View estimated usage time remaining based on your usage over the last 7 days.

• Recent battery usage: Tap an item to view details of its battery usage.

3. Tap More for the following options:

• Refresh: Update the listing.

• Optimize battery usage: Choose apps to optimize their individual battery usage.

View and manage the memory used by the device.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Storage.

– or –

Tap Storage > Internal storage (if an optional SD card is installed).

Information displayed includes:

• Device storage used out of the total space available is displayed.

• Total space: The total amount of memory on your device.

• Available space: The amount of storage space currently available.

• System memory: The minimum amount of storage space required to run the system.

• Used space: The amount of storage space currently being used.

• Other: The space used by app data, downloaded files, and Android system files.

• Cached data: The amount of data currently cached.

• Explore: Launch My Files to view content stored on your device.

To increase available memory:

1. From a Home screen, tap Apps > Settings > System.

2. Tap Storage.

– or –

Tap Storage > Internal storage (if an optional SD card is installed).

3. Tap Cached data to clear cached data for all apps.

4. Tap Delete to confirm.

When you install an optional memory card, it is automatically mounted (connected to the device) and prepared for use. However, should you unmount the card without removing it from the device, you need to mount it before it can be accessed.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Storage > SD card.

3. Tap Mount.

Warning: To prevent damage to information stored on the memory card, unmount the card before removing it from the device.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Storage > SD card.

3. Tap Unmount.

4. Insert the removal tool into the hole on the SIM card/Memory card tray, and push until the tray pops out.

5. Remove the memory card from the tray, and slide the tray back into the slot.

Warning: When formatting an SD card, you should back up your music and photo files that are stored on the card because formatting the SD card deletes all the stored data.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Storage > SD card.

3. Tap Format and follow the prompts.

By default, your device receives date and time information from the wireless network. When you are outside network coverage, you may want to set date and time information manually using the date and time settings.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Date and time. The following options are available:

• Automatic date and time: Receive date and time updates from the wireless network.

• Set date: Enter the current date (only available when Automatic date and time is disabled).

• Set time: Enter the current time (only available when Automatic date and time is disabled).

• Select time zone: Choose your local time zone (only available when Automatic date and time is disabled).

• Use 24-hour format: Set the format for displaying time.

View tips and guidelines for using your device.

1. From a Home screen, tap Apps > Settings > System.

2. Tap Help for information about:

• New features

• Getting started

• Applications

• Settings

View information about your device, including current status, legal information, hardware and software versions, and more.

1. From a Home screen, tap Apps > Settings > System.

2. Tap About device, and then tap items for more details:

• Software update: Check for and install available software updates.

• Status: View the status of the battery, network, and other information about your device.

• Legal information: View legal notices and other legal information.

• Device name: View and change your device’s name.

• Additional device information includes the Model number, Android version, Build number, and more.

You can use your calculator to perform basic operations.

1. From a Home screen, tap Apps > Calculator.

2. Enter the first number using the numeric keys.

3. Tap the appropriate arithmetic function key.

4. Enter the next number.

5. Tap Equals to view the result.

6. Tap C Clear to clear the results.

To clear the calculator history:

Tap History > Clear history.

Tip: Tap Keypad to return to the calculator keys.

To copy all or part of the calculation to the clipboard:

Touch and hold an entry in the display field, and then tap Copy.

The Calculator app also provides advanced arithmetic functions, such as sin, cos, and tan.

To use the Scientific calculator:

• If Auto rotate is enabled, turn the device to landscape.

– or –

• If Portrait is enabled, tap Rotate.

Note: Auto rotate and Portrait are found in the Quick settings of the Notification panel. For more information, see Quick Settings.

To choose a calendar view:

1. From a Home screen, tap Apps > Calendar.

2. Tap Menu and tap one of the following:

• Year: Display all twelve months of this year. Swipe across the screen to display another year.

• Month and agenda: Display the current month. Swipe across the screen to display another month. Events and tasks are also listed.

• Week: Display the current week. Swipe across the screen to display another week.

• Day: Display today’s schedule by hour. Swipe across the screen to display another day.

• Tasks: Display all tasks.

3. Tap Today to return to the current date.

You can use your Calendar to create events.

1. From a Home screen, tap Apps > Calendar.

2. Tap Add to add an event.

3. Enter details for the event, and then tap Save.

You can share events you create from your Calendar.

1. From a Home screen, tap Apps > Calendar.

2. Tap an event to view it.

3. Tap Share, choose a sharing method, and follow the prompts.

You can delete events you create from your Calendar.

1. From a Home screen, tap Apps > Calendar.

2. Tap an event to view it, and then tap Delete.

You can use your Calendar to create tasks. Tasks are items you add to the calendar to be accomplished on a certain day. A task appears as a checklist item and is removed once you mark the task as complete.

1. From a Home screen, tap Apps > Calendar.

2. Tap Menu (by default, the Month and Year are shown) and tap Tasks.

3. Tap the Enter new task field to enter a new task.

4. You can choose to set the task for Today, Tomorrow, or tap Expand to set the following options:

• Set date: Choose a date on the calendar for the task.

• My task: Choose a calendar.

• Reminder: Set a reminder alert.

• Notes: Save a note with your task.

• Priority: Assign a priority to the task.

5. Tap Save to save the task.

You can delete tasks you create from your Calendar.

1. From a Home screen, tap Apps > Calendar.

2. Tap a day on the calendar to view the tasks for the day, or tap Menu > Tasks from the drop-down menu.

3. Tap the Checkbox by the task to mark it as complete and remove it from the calendar.

• To delete the task permanently, tap the task to open it, and then tap Delete.

These settings allow you to modify settings associated with using the Calendar.

1. From a Home screen, tap Apps > Calendar.

2. Tap More > Settings.

3. Tap an option and follow the prompts.

• Gallery: Open the Gallery to view photos and videos.

• Record video: Record a video.

• Take a picture: Take a picture.

• Switch cameras: Switch between the rear and front cameras.

• Shooting mode: Change the shooting mode.

• More settings: Configure other camera settings.

• Quick settings: Select camera settings or options (e.g., Effect, HDR, Timer, Flash, Picture size).

• Show or hide settings: Show or hide the camera settings.

Take pictures with your device’s front or rear camera.

Note: Prior to using the camera, remove the plastic protective covering from the camera lens.

1. From a Home screen, tap Apps > Camera.

2. Using the display screen as a viewfinder, compose your shot by aiming the camera at the subject. While composing your picture, use the available options or these gestures:

• Touch the screen with two fingers and pinch or spread them on the screen to zoom in or out.

• Tap the screen to focus on the area you touched. When you tap the screen, a brightness scale is displayed. Slide the light bulb up or down to adjust the brightness.

3. Before taking the photo, you can tap the icons to access various camera options and settings.

4. Tap Take a picture to take the picture.

Note: You can also press the Volume key up or down to take a picture. This is the default action of the Volume key while the camera is active. You can also set the Volume key to act as the video record key or as a zoom key.

Several visual effects are available. Some modes are not available when taking self-portraits.

1. From a Home screen, tap Apps > Camera.

2. Tap Mode for the following options. Each section indicates which camera (front or rear) the modes are available for.

Both cameras:

• Video collage: Create your own short collages and slow-motion videos without any editing tools.

• Live broadcast: Broadcast live on YouTube. Share your link with friends so they can watch your video in real time. For more information, see Live Broadcast.

• Virtual shot: Create multi-directional views of objects.

• Download: Download additional shooting modes from the Galaxy Apps store.

• Info: Read information about each available camera mode.

• More: See more options for the camera modes.

Rear camera:

• Auto: Allow the camera to evaluate the surroundings and determine the ideal mode for the picture.

• Pro: Manually adjust the ISO sensitivity, exposure value, white balance, and color tone while taking pictures.

• Selective focus: Change the focus of pictures after they have been taken. You can focus on subjects near to the camera, far away from the camera, or both.

• Panorama: Create a linear image by taking pictures in either a horizontal or vertical direction.

• Slow motion: Record videos at a high frame rate for viewing in slow motion. You can play a specific section of each video in slow motion after recording it.

• Food: Take pictures that emphasize the vivid colors of food.

• Hyperlapse: Create your own time lapse video by recording at various frame rates. The frame rate is automatically adjusted depending on the scene being recorded and the movement of the device.

Front camera:

• Selfie: Take selfie shots and apply various effects, such as an airbrushed effect.

• Wide selfie: Take wide-angle selfie shots to fit more people into your pictures.

You can adjust your camera’s settings using the icons on the main camera screen and the full camera settings menu.

1. From a Home screen, tap Apps > Camera.

2. Quick settings are listed across one side of the camera view finder. Available options vary depending on the camera or recording mode used. Default settings include:

• Effect: Add special graphical effects.

• HDR: Enables the light sensitivity and color depth features of the device to produce a brighter and richer picture.

• Timer: Take time-delayed pictures or videos.

• Flash: Activate or deactivate the flash.

• Picture size: Select a resolution. Use higher resolution for higher quality. Higher resolution pictures take up more memory.

3. Tap Settings to configure settings for the Camera. Available options vary depending on the camera or recording mode used.

Both cameras:

• Video size: Select a resolution. Higher resolution videos take up more memory.

• Motion photo: Create a short video by taking pictures.

• Video stabilization: Activate anti-shake.

• Grid lines: Display viewfinder grid lines.

• Location tags: Attach a GPS location tag to the picture.

• Review pictures: Set to show pictures after taking them.

• Quick launch: Open camera by pressing the Home key twice in quick succession.

• Storage location: Select the memory location for storage (only appears if SD card installed).

• Volume keys function: Use the Volume key as the camera key, the record key, or as a zoom key.

• Shutter sound: Enable or disable a shutter sound.

• Reset settings: Reset the camera settings.

• Help: View information on using the camera.

Rear camera:

• Tracking AF: Focus on and track a subject selected on the preview screen.

• Shooting methods (rear): Voice control (say “smile”, “cheese”, “capture”, or “shoot” for pictures; “Record video” for videos).

• Save as raw file: Save pictures as high-resolution, uncompressed image files.

Front camera:

• Save pictures as previewed: Save the self-portrait or self-recording as viewed on the camera screen, not as flipped images.

• Shooting methods (front): Voice control, Tap to take pics (tap screen for selfies), Gesture control (detect palm for 2-sec timer), Use heart rate sensor (tap sensor after face recognition).

Use YouTube to share what is happening around you.

To access the Live Broadcast:

• From a Home screen, tap Apps > Camera > Mode > Live broadcast.

Note: You need to sign in to your Google Account and enable Live broadcasting in your YouTube settings to use this feature.

Live Broadcast Options:

• Rear/Front: Choose which camera to record with.

• Invite: Invite contacts to view your Live broadcast by sending them a link.

• Settings: Set your privacy settings, Video size, Auto save, and manage your account.

• Live: Start recording your Live broadcast.

• Share: Share while recording your Live broadcast.

• Stop: End your Live broadcast.

Record a Live Broadcast:

1. From a Home screen, tap Apps > Camera > Mode > Live broadcast.

2. Tap Invite and select contacts to share your Live broadcast with. You also have the option to share during recording and when you finish.

3. Press Live to begin recording.

4. When you are finished, tap Stop.

You can share your Live broadcast with contacts before recording or share the link after you have finished recording and it has been posted to YouTube.

To invite contacts before broadcasting:

1. From a Home screen, tap Apps > Camera > Mode > Live broadcast.

2. Tap Invite and select contacts or groups to share your Live broadcast with.

3. Tap Save to send invites.

To share a Live broadcast while broadcasting:

• Tap Share and select a sharing method to share your Live broadcast.

To share a Live broadcast after broadcasting:

• After recording, tap Share link and select a sharing method to share your Live broadcast.

Customize your Live Broadcasts.

1. From a Home screen, tap Apps > Camera > Mode > Live broadcast.

2. Tap Settings and select an option to customize:

• Account: Tap to add or switch your Google Account.

• Privacy: Choose either to have your videos unlisted (only friends with a link can view) or public (anyone can view).

• Video size: Tap to choose a size option.

• Social media settings: Share your link with social media when you start broadcasting.

• Auto save: Tap to enable auto saving your videos to the Gallery app.

• Auto dim: Dims the brightness if you broadcast without touching the screen.

• Add shortcut on Home screen: Tap to create a shortcut to Live broadcast on the Home screen.

The Clock app offers features for keeping track of time and setting alarms.

1. From a Home screen, tap Apps > Clock.

2. Tap a tab to use a feature:

• Alarm: Set an alarm to ring at a specific time.

• World clock: View the time of day or night in other parts of the world.

• Stopwatch: Measure intervals of time.

• Timer: Use a timer to count down to an event.

Create an alarm event. You can set one-time or recurring alarms, and choose options for how to be notified.

1. From a Home screen, tap Apps > Clock.

2. Tap the following items to configure an alarm (under the Alarm tab):

• Date: Choose the day for this alarm.

• Time: Set a time for the alarm.

• Repeat: Choose when to repeat the alarm, if so desired.

• Options: Tap to view and set the following options:

– Alarm type: Choose whether the alarm uses sound, vibration, or vibration and sound.

– Volume: Drag the slider to set the volume.

– Alarm tone: Choose a sound.

– Snooze: Allow snoozing. Set interval and repeat values.

– Increasing volume: Start playing the alarm tone at a low volume and slowly increase (available for sound alarm types).

– Alarm name: Enter a name for the alarm.

3. Tap Save to save the alarm.

You can delete an alarm that you created.

1. From a Home screen, tap Apps > Clock.

2. Find the alarm in the alarm list (under the Alarm tab), and then tap X Delete in the upper right corner of the alarm entry.

The World clock lets you keep track of the current time in multiple cities around the globe.

To list a city on the main World clock screen:

1. From a Home screen, tap Apps > Clock.

2. Tap World clock.

3. Tap a city to view it on the globe.

4. Tap + Add city in the pop-up for the city.

5. Repeat to add more cities.

To remove a city from the main World clock screen:

1. From a Home screen, tap Apps > Clock.

2. Tap World clock.

3. Find the city to remove, and then tap X Delete in the upper right corner of the city entry.

The Stopwatch lets you time events down to a hundredth of a second.

1. From a Home screen, tap Apps > Clock.

2. Tap Stopwatch and use the following options:

• Start: Begin timing.

• Stop: Stop timing.

• Lap: Keep track of lap times.

• Resume: Continue timing after stopping the clock.

• Reset: Reset the Stopwatch to zero.

The Timer provides a countdown timer for up to 99 hours, 59 minutes, and 59 seconds.

1. From a Home screen, tap Apps > Clock.

2. Tap Timer.

3. Use the keypad and tap Hours, Minutes, and Seconds to set the length of the Timer. The following options are available:

• Start: Begin the Timer.

• Pause: Pause the Timer.

• Resume: Resume the Timer.

• Cancel: Stop the Timer.

• Reset: Reset the Timer.

Store and manage your contacts with the Contacts app, which can be synchronized with a variety of your existing personal accounts, including Google, Email, Facebook, and your Samsung account.

Access your list of contacts by using the Contacts app. To access your Contacts list:

• From a Home screen, tap Apps > Contacts.

Note: The Contacts app is different from the Contacts tab in the Phone app. Although both list the contacts in your phone and accounts, the available options and functions are different.

You can search for a contact or swipe the list to find one by name.

1. From a Home screen, tap Apps > Contacts.

2. Tap the Search field, and then enter characters to find contacts that match.

– or –

Tap a letter on the side of the list to jump directly to that letter in the alphabetical list. You can also slide your finger across the alphabetical list to select a letter with better precision.

Use the following procedure to add a new contact.

1. From a Home screen, tap Apps > Contacts.

2. Tap Create contact, and then tap contact fields to enter information.

• Choose a storage account for the contact. You can store the contact on the device, your SIM card, or sync it with an account.

• Tap Contact photo to assign a picture to the new contact.

• Enter a name, phone number, email address, assign the contact to a group, and choose a default ringtone.

– Tap + Add to enter additional entries.

– Tap Remove to remove an entry.

– Tap More for additional fields.

– Tap the label to the right of an entry to choose a label for the field (for example, Home or Work).

• Tap Scan business card to import contact information from a business card through the device’s camera.

3. Tap Save.

When editing a contact, you can tap a field and change or delete the information, or you can add more fields to the contact’s list of information.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it, and then tap Edit.

3. Tap any of the fields to add, change, or delete information.

4. Tap Save.

When you share a contact, the contact’s information is sent as a vCard file (.vcf). You can share a vCard using Bluetooth or Wi-Fi Direct, attach it to a message, or save it to a storage location.

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap More > Share contact.

3. Choose a sharing method and follow the prompts.

When you have contacts from various sources, such as Gmail or Facebook, you may have multiple similar entries for a single contact. Contacts lets you link multiple entries into a single contact.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it.

3. Tap Linked contact.

4. Tap Link another contact, and then tap contacts to choose them.

5. Tap Link.

You can unlink a contact that you previously linked.

1. From a Home screen, tap Apps > Contacts.

2. Tap the contact to display it.

3. Tap More > Manage linked contacts.

4. Tap Separate beside contacts to unlink them from the main contact.

You can delete a single contact or choose multiple contacts to delete.

1. From a Home screen, tap Apps > Contacts.

2. Touch and hold a contact to select it. You can also tap other contacts or tap the All checkbox at the top of the screen to select all contacts.

3. Tap Delete, and then confirm when prompted.

When you mark contacts as favorites, they are easily accessible from other apps. Favorites display together on the Favorites tab in the Phone app.

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap Add to Favorites (the star brightens).

You can remove contacts from Favorites.

1. From a Home screen, tap Apps > Contacts.

2. Tap a contact to display it, and then tap Remove from Favorites (the star dims).

You can use groups to organize your contacts. Your device comes with preloaded groups, and you can create your own. Groups make it easy to find contacts, and you can send messages to the members of a group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap Create.

3. Tap fields to enter information about the group:

• Group name: Enter a name for the new group.

• Group ringtone: Customize the sounds for the group.

• Add member: Select contacts to add to the new group, and then tap Done.

4. Tap Save.

You can rename a contact group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap Edit and enter a new name.

4. Tap Save.

You can add contacts to a group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap Edit > Add member, and then tap the contacts you want to add. When finished, tap Done.

4. Tap Save.

You can send a text message to members of a group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap More > Send message.

4. Type your message and tap Send.

You can send an email to members of a group.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap a group.

3. Tap More > Send email.

4. Tap contacts to select them, or tap the All checkbox at the top of the screen to select all, and then tap Done.

• Only group members that have an email address in their records display.

5. Choose an email account and follow the prompts.

6. Type your message and tap Send.

Preset groups cannot be deleted.

1. From a Home screen, tap Apps > Contacts.

2. Tap Groups, and then tap the group to delete.

3. Tap More > Delete.

4. Tap Group only to only delete the group or tap Group and members to delete the group and the contacts in the groups.

These settings allow you to modify settings associated with using the Contacts app.

1. From a Home screen, tap Apps > Contacts.

2. Tap More > Settings.

3. Tap an option and follow the prompts.

Use the Email app to view and manage all your email accounts in one app.

To access Email:

• From a Home screen, tap Apps > Samsung folder > Email.

Configure Email Accounts:

You can configure Email for most accounts in just a few steps.

1. From a Home screen, tap Apps > Samsung folder > Email.

2. Follow the prompts to set up your email account.

To add an Email account:

1. From a Home screen, tap Apps > Samsung folder > Email.

2. Tap More > Settings > + Add account.

3. Enter your email address and password.

The device communicates with the appropriate server to set up your account and synchronize your email. When complete, your email is displayed in the Inbox for the account.

Note: To configure email account settings at any time, tap More > Settings. Tap the email account to display its settings.

You can view email you receive for multiple accounts on the Combined inbox screen or you can view email accounts individually.

1. From a Home screen, tap Apps > Samsung folder > Email.

2. Tap Menu at the top left of the screen to view the current account mailbox.

3. Tap the account name to view:

• Combined inbox: View all email in a combined inbox.

• [Account Name]: View email for only one email account.

There are several tools available from the Inbox screen.

• From a Home screen, tap Apps > Samsung folder > Email.

• Tap a message to read and reply or forward it.

• Tap Search to search for key words in your email inbox.

• Tap More for additional message options like sorting, deleting, sharing and more.

This section describes how to create and send an email using the Email app.

1. From a Home screen, tap Apps > Samsung folder > Email > Compose.

2. Tap the To field to manually add an email address or tap Add Recipient to select a recipient from Contacts or Groups.

• If manually entering recipients, enter additional recipients by separating each entry with a semicolon (;). More recipients can be added at any time before the message is sent.

• If adding a recipient from your Contacts, tap the contact to place a checkmark, and then tap Done. The contact is displayed in the recipients field.

• Tap More to add Cc and Bcc fields.

3. Tap the Subject and Message fields to enter text.

• Tap Attach to add Files, Images, Audio, and more to your email.

• Tap More for additional email options.

4. Review your message and tap Send.

To remove an email account:

1. From a Home screen, tap Apps > Samsung folder > Email.

2. Tap More > Settings.

3. Tap the account you want to remove.

4. Tap Remove. Confirm when prompted.

These settings allow you to modify settings associated with using the Email app.

1. From a Home screen, tap Apps > Samsung folder > Email.

2. Tap More > Settings.

3. Under General, tap an option, and then follow the prompts.

4. Tap an account to configure specific settings for only that account.

Samsung Galaxy Apps provides a quick and easy way to find and download free premium apps that are compatible with your Galaxy device.

To access the Samsung Galaxy Apps website:

• From a Home screen, tap Apps > Samsung folder > Galaxy Apps.

Galaxy Essentials is a collection of specially chosen apps available through Samsung Apps. From Galaxy Essentials, you can access and download a collection of premium content, free of charge.

To access Galaxy Essentials:

1. From a Home screen, tap Apps > Samsung folder > Galaxy Apps.

2. Swipe across to Exclusives and find Galaxy Essentials.

3. Follow the prompts to download Galaxy Essentials apps.

Note: A Samsung account is required to purchase and download apps.

View, edit, and manage pictures and videos.

Note: Some functions described in this section are only available if there are images or videos in the Gallery.

Launching Gallery displays available folders. When another app, such as Email, saves an image, a Download folder is automatically created to contain the image. Likewise, capturing a screenshot automatically creates a Screenshots folder.

1. From a Home screen, tap Apps > Gallery.

2. Tap Menu in the upper left corner, and then tap an option to choose the way items display.

• In Albums view, you can create albums to organize your images. On the drop-down menu, tap Albums, and then tap More > Create album.

3. Depending on the view mode selected, either tap an image or video to view it, or first tap an album or folder and then tap an image or video.

• When viewing an image or video, you can swipe left or right to view the next or previous image or video.

Use one of the following methods to zoom in or out on an image:

• Double-tap anywhere on the screen to zoom in or zoom out.

• Spread two fingers apart on any place to zoom in. Pinch the screen to zoom out.

You can play videos stored on your device.

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder or category to open it.

3. Tap a video to view it.

4. Tap Play to play the video.

You can trim segments of a video.

1. Select a video, and then tap the screen once to see the video options.

2. Tap Edit, and then tap Trim.

3. Use the sliders at the bottom of the screen to trim the video. Move the left bracket to the desired starting point, and then move the right bracket to the desired ending point.

4. Tap Export to save the video. Modify the File name or Resolution, and then tap Export to confirm the changes.

You can edit images stored on your device.

While viewing an image, tap the screen once to see the following options:

• Auto adjust: Apply adjustments determined by built-in correction software.

• Share: Send the image to your contacts by email, messaging, social media, cloud accounts, or other methods.

• Edit: View and use the editing tools.

• Delete: Delete the image from your device.

• More:

– Rotate left: Rotate the picture counter-clockwise.

– Rotate right: Rotate the picture clockwise.

– Details: View and edit information about the image, including the date created, location, and properties.

– Slideshow: Start a slideshow with the images and videos in the current folder.

– Set as contact picture: Set the image as the photo for a contact.

– Set as wallpaper: Set the image as a wallpaper for the Home and Lock screens.

You can share images and videos from your Gallery.

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder to open it.

3. In a folder, tap More > Share, select images and videos, and then tap Share to send them to others or share them with social network services.

– or –

While viewing a single image or video, tap Share to send it to others or share it with social network services.

You can delete images stored on your device.

1. From a Home screen, tap Apps > Gallery.

2. Tap a folder to open it.

3. Tap More > Edit.

4. Tap images and videos to select them, or tap the All checkbox at the top of the screen to select all images and videos.

5. Tap Delete, and confirm when prompted.

– or –

When viewing a single image or video, tap Delete.

Access the Internet with a fully-featured web browser.

• From a Home screen, tap Apps > Samsung folder > Internet.

The following command keys are available:

• < Back or Back: Return to the previous page.

• Forward: Go forward to a recent page.

• Home: Display your Internet Home screen.

• Bookmarks: Manage bookmarked pages, saved pages, and history.

• Tabs: Manage open tabs. The number on the icon indicates the number of tabs that are currently open.

• Refresh: Refresh or reload the current Web page.

To view a web site:

• Tap the address field, enter the web address, and then tap Go on the keyboard.

To zoom in or out:

• Tap the screen twice or pinch the screen to zoom out. Stretch the screen to zoom in.

Use tabs to view multiple web pages at the same time.

To open a new tab:

• Tap Tabs > New tab.

To close a tab:

1. Tap Tabs.

2. Tap Close by the tabs you want to close.

The Bookmarks page stores Bookmarks, Saved pages, and History.

To bookmark the current web page:

1. Tap Bookmarks > Add.

2. Type a title for the bookmark and tap Save.

To open a bookmarked web page:

1. Tap Bookmarks > Bookmarks.

2. Tap a bookmark entry.

Saving a web page stores the web page content on your device so that you can access it offline.

To save the current web page:

• Tap More > Save web page.

To view saved web pages:

1. Tap Bookmarks > Saved pages.

2. Tap a saved page to open it in the browser.

To view a list of recently visited web pages:

• Tap Bookmarks > History.

To share a web page address with others:

• Tap More > Share, and follow the prompts.

Pages viewed in secret mode are not listed in your browser history or search history, and leave no traces (such as cookies) on your device. Secret tabs are a darker shade than the normal tab windows.

Note: Any downloaded files remain on your device after you close the secret tab.

To enable Secret mode:

1. From a Home screen, tap Apps > Samsung folder > Internet.

2. Tap Tabs.

3. Tap Turn on secret.

4. Tap Create password to protect your Secret mode data with a password.

– or –

Tap Do not use password.

To turn off Secret mode:

1. From a Home screen, tap Apps > Samsung folder > Internet.

2. Tap Tabs.

3. Tap Turn off secret.

These settings allow you to modify settings associated with using the Internet app.

1. From a Home screen, tap Apps > Samsung folder > Internet.

2. Tap More > Settings.

3. Tap an option and follow the prompts.

Use Memo to write and save notes on your device. You can create Memos using the Memo app.

1. From a Home screen, tap Apps > Memo.

2. Tap + Create memo and type a memo. Available options include:

• Category: Add or change the category.

• Tasks: Add tasks.

• Image: Insert an image into the memo.

• Drawing: Create a drawing and add it to the memo.

• Voice: Use your voice to insert text into the memo.

3. Tap Save when finished.

You can make edits to Memos you create.

1. From a Home screen, tap Apps > Memo.

2. Tap a memo to view it.

3. Tap the content and make edits. When you are finished, tap Save.

You can browse Memos you create.

• From a Home screen, tap Apps > Memo.

• Browse memo entries by swiping up or down.

• To search for a memo, tap Search.

You can edit, share, or manage Memos.

1. From a Home screen, tap Apps > Memo.

2. While browsing memos, tap More for the following options:

• Edit: Select notes to share, delete, or move.

• Manage categories: Create and manage categories to organize your memos.

The Samsung Messages app provides the following message types:

• Text Messages (SMS): The Short Message Service (SMS) lets you send and receive text messages to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service provider’s message service.

• Multimedia Messages (MMS): The Multimedia Messaging Service (MMS) lets you send and receive multimedia messages (such as picture, video, and audio messages) to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service provider’s multimedia message service.

Messaging icons are displayed at the top of the screen and indicate when messages are received and their type.

This section describes how to create and send a message using the Messages app.

1. From a Home screen, tap Apps > Messages.

2. Tap Compose.

3. Tap the Enter recipients field to manually enter a recipient or tap Add Recipient to select a recipient from your Contacts. You can also select the recipient based on Groups, Favorites, or Logs.

• If adding a recipient from your Contacts, tap the contact to place a checkmark, and then tap Done. The contact is placed in the recipients field.

• Enter additional recipients by separating each entry with a semicolon (;) and then using the previous procedure. More recipients can be added at any time before the message is sent.

• For the Group option, if the number of recipients is less than ten, all members in the group are added. You must delete any unnecessary members in the list by selecting the trash can icon and deleting unwanted entries.

4. Tap the Enter message field to enter a message.

• Attach: Add images, audio, and more to your message.

• Add emoji: Choose an available emoji from the list and add it into your message at the cursor location.

5. Review the message and tap SEND Send.

Note: If you exit a message before you send it, the message is automatically saved as a draft.

When you receive a new message, the New message icon appears on the Status bar.

To view the message:

• Open the Notification panel and tap the message. For more information, see Notification Panel.

– or –

• From a Home screen, tap Apps > Messages, and then tap the new message to view it.

• To play a multimedia message attachment (audio or video), tap Play.

• To scroll through the list of messages, swipe up or down the page.

To delete messages, follow these steps:

1. From a Home screen, tap Apps > Messages.

2. Tap More > Delete.

3. Tap each message you want to delete or tap the All checkbox at the top of the screen to select all messages.

4. Tap Delete and confirm if prompted.

You can search through your messages by using the Message Search feature.

1. From a Home screen, tap Apps > Messages.

2. Tap Search.

3. Enter a word or phrase to search for, and then tap Search on the keyboard.

Configure the settings for text messages, multimedia messages, push messages, and more.

• From a Home screen, tap Apps > Messages > More > Settings.

This device is designed to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS). Emergency alerts allow customers to receive geographically-targeted messages notifying them of imminent threats to safety in their area. There is no charge for receiving an Emergency alert message.

There are three types of Emergency alerts:

• Alerts issued by the President

• Alerts involving imminent threats to safety of life (extreme and severe)

• AMBER alerts (missing child alert)

Users may choose not to receive Imminent alerts (extreme and severe) and AMBER alerts.

Note: Alerts issued by the President cannot be disabled.

To disable Imminent and AMBER alerts:

1. From a Home screen, tap Apps > Messages.

2. Tap More > Settings > Emergency alert settings.

3. Tap Emergency alerts.

• All alerts are enabled (on) by default.

4. Tap an alert option to disable it.

Access files stored on your device, including images, videos, music, and sound clips.

1. From a Home screen, tap Apps > Samsung folder > My Files.

2. Tap a category to view the relevant files or folders.

3. Tap a file or folder to open it.

Files stored in the device are organized into the following groups:

• Recent files: View recently saved files (appears if files have been accessed recently).

• Device storage: View folders and files located on the device.

• SD card: View folders and files located on the optional SD card (not included; appears if card is installed).

• Download history: View all apps and files that have been downloaded to the device.

• Documents: View document files.

• Images: View image files.

• Audio: View audio files.

• Videos: View video files.

• Google Drive: Use a Google account for cloud storage.

Note: Cloud drives vary depending on the services you sign in to.

Use My File options to search, edit, clear file history, and more.

• From a Home screen, tap Apps > Samsung folder > My Files. The following options are available:

• Search: Search for a file or folder.

• More: Tap for the following options:

– Clear recent file history: Clear the Recent files category.

– Show/Conceal hidden files: Show or conceal hidden files.

– Access cloud: Access your cloud server data in Gallery and My Files on your device.

• Storage usage: Tap to view memory information for your device.

Use S Health to plan, track, and manage your health goals and activities, including exercise, sleep, and meals.

Note: This device and related software are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease.

1. From a Home screen, tap Apps > Samsung folder > S Health.

2. Read and accept the terms and conditions.

3. Set up your health profile and goals.

While moderate physical activity, such as brisk walking, is safe for most people, health experts suggest that you talk with your doctor before you start an exercise program, particularly if you have any of the following conditions:

• Heart disease;

• Asthma or lung disease;

• Diabetes, or liver or kidney disease;

• Arthritis.

You should also check with your doctor if you have symptoms suggestive of heart, lung, or other serious disease, such as:

• Pain or discomfort in your chest, neck, jaw, or arms during physical activity;

• Dizziness or loss of consciousness;

• Shortness of breath with mild exertion or at rest, or when lying down or going to bed;

• Ankle swelling, especially at night;

• A heart murmur or a rapid or pronounced heartbeat;

• Muscle pain when walking upstairs or up a hill that goes away when you rest.

Finally, the American College of Sports Medicine recommends that you see your doctor before engaging in vigorous exercise if two or more of the following apply:

• You are a man older than age 45 or a woman older than age 55;

• You have a family history of heart disease before age 55;

• You smoke or quit smoking in the past six months;

• You have not exercised for three months or more;

• You are overweight or obese;

• You have high blood pressure or high cholesterol;

• You have impaired glucose tolerance, also called prediabetes.

If you are unsure of your health status, have several health problems, or are pregnant, you should speak with your doctor before starting a new exercise program.

Speak commands to perform operations on your device, and to speak criteria for searches and other operations.

You can access S Voice™ from the Apps list.

1. From a Home screen, tap Apps > Samsung folder > S Voice.

2. Speak a command.

3. Tap Microphone if the device does not hear you, or to give it another command.

Tip: Tap ? Help for example commands.

These settings allow you to modify settings associated with using the S Voice app.

1. From a Home screen, tap Apps > Samsung folder > S Voice.

2. Tap Settings.

3. Tap an option and follow the prompts.

Samsung Pay is the new way to pay with your Samsung Galaxy device. It is simple, secure and works in more stores than any other mobile payment service. Samsung Pay is accepted almost anywhere you can swipe or tap your credit card.

Note: Make sure the NFC feature is enabled on your device. For more information, see NFC and Payment.

Note: For added security, your credit and debit card information is not stored on a cloud service. If you are using the Samsung Pay app on multiple devices, you must sign in to the app and add all payment cards on each device.

To set up Samsung Pay:

1. From a Home screen, tap Apps > Samsung folder > Samsung Pay.

2. Tap Install and follow the prompts.

Note: You must log in to your Samsung account or create a new Samsung account to use Samsung Pay.

Access Samsung Pay from the Screen off, Lock Screen or Home screen using Simple Pay.

To customize Simple Pay:

1. From a Home screen, tap Apps > Samsung folder > Samsung Pay.

2. Tap More > Settings > Use Simple Pay.

3. Tap On/Off to enable Simple Pay on each screen.

To use Simple Pay:

1. From any screen, swipe up from the Home key.

• Your payment card and Simple Pay are displayed.

2. Drag the card down to close Simple Pay.

Use Samsung Pay quickly and conveniently whenever you have your device with you.

1. From a Home screen, tap Apps > Samsung folder > Samsung Pay.

– or –

From any screen, swipe up from the Home key.

2. Select a card to pay with and authorize payments by scanning your finger on the Home key or entering your Samsung Pay PIN.

3. Hold your phone over the store’s card reader.

• When your payment is complete, a receipt is sent to your registered email.

Purchase, send, and redeem gift cards from an expanding selection of your favorite retailers.

To view the list of supported retailers:

1. Visit samsung.com/us/samsung-pay.

2. Scroll down to “Gift cards now available on Samsung Pay” and click the link.

Samsung Pay is designed with the latest security technology and works on most recent Samsung Galaxy devices. Payments are authorized with your fingerprint or PIN and each transaction uses a unique token each time, so your device only allows payments with your consent.

If your device is ever lost, you can use the Find My Mobile function to remotely wipe your data for even more protection. For more information, see Find My Mobile.

For more information about Samsung Pay, visit: samsung.com/SamsungPay

For Samsung Pay support, visit: samsung.com/us/support/owners/app/samsung-pay

There are a couple of ways to access your device settings.

• From a Home screen, tap Apps > Settings.

– or –

• Drag down from the Status bar to display the Notification panel, and then tap Settings.

Settings are grouped into categories.

• Quick settings: Add shortcuts to settings you use often.

• Connections: Configure your connections to other devices and networks.

• Device: Customize the device’s display, sounds and more.

• Personal: Configure your personal accounts and preferences.

• System: Customize the device’s system settings.

If you are not sure exactly where to find a certain setting, you can use the Search feature.

1. From a Home screen, tap Apps > Settings.

2. Tap Search.

• Enter a word or words in the Search field. As you type, settings that match display on the screen.

• Tap an entry to go to that setting.

Quick settings are the settings that you are most likely to frequently use. When you first access the Settings menu, the Quick settings are set to a default list of settings.

To edit the Quick settings list:

1. From a Home screen, tap Apps > Settings.

2. Tap More > Edit quick settings.

• Choose additional settings to display in your Quick settings menu. Settings that are already in the Quick settings menu are checked.

• Uncheck a setting to remove it from the Quick settings list.

3. Tap Back to save your new Quick settings menu.

Turning Wi-Fi on makes your device able to discover and connect to compatible in-range wireless APs.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on or off.

Status bar icons indicate your current Wi-Fi connection status:

• When Wi-Fi is connected, active, and communicating with a wireless Access Point, Wi-Fi active is displayed in the Status bar.

• If a Wi-Fi access point is available, but your device is not connected to it, Wi-Fi available is displayed. It may also display if there is a communication issue with the target wireless Access Point.

To scan for a Wi-Fi network and connect to it:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

• When Wi-Fi is turned on, your device automatically scans for available networks and displays them.

3. Tap the network you want to connect to.

• When you select an open network, you are automatically connected to the network. Otherwise, enter a password to connect.

You can connect your device to a Wi-Fi network manually.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

3. Tap More > Add network.

4. Enter information about the Wi-Fi network:

• Enter network name: Enter the name of the Wi-Fi network.

• Security: Select a security option and enter your password.

• Show advanced options: Add advanced options, such as IP settings and Proxy settings.

5. Tap Connect to store the new information and connect to your target wireless Access Point.

The Wi-Fi settings menu allows you to set up many of your device’s advanced Wi-Fi services.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

3. Tap More for options:

• Add network: Manually add a Wi-Fi network.

• WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other equipment.

• WPS PIN entry: View the PIN used by your device to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).

• Smart network switch: Connect automatically to a mobile network connection when the Wi-Fi connection is unstable.

• Advanced:

– Network notification: Receive notifications when open networks in range are detected.

– Passpoint: Automatically connect to Passpoint-certified Wi-Fi access points.

– Keep Wi-Fi on during sleep: Specify when to disconnect from Wi-Fi.

– Auto connect to AT&T Wi-Fi: Automatically connect to an AT&T Wi-Fi hotspot as soon as your device detects it.

– Install network certificates: Install authentication certificates.

– MAC address: View your device’s MAC address (not configurable).

– IP address: View your device’s IP address (not configurable).

• Help: Learn about setting up and using Wi-Fi networks, and other settings.

Wi-Fi Direct allows direct device-to-device connections using Wi-Fi, without having to connect to a Wi-Fi network.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

• Wi-Fi must be on to configure settings.

3. Tap Wi-Fi Direct. Your device automatically scans for nearby Wi-Fi Direct devices.

4. Select a device, and then follow the prompts to complete the connection.

Wi-Fi Direct Status Indicator:

• When your device is connected to another device using Wi-Fi Direct, Wi-Fi Direct is displayed in the Status bar.

Use the settings menu to turn your device’s Bluetooth on or off.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Bluetooth, and then tap On/Off to turn Bluetooth on or off.

Bluetooth Status Indicator:

• When Bluetooth is turned on, Bluetooth icon is displayed in the Status bar.

When you want to pair with another Bluetooth device, you can scan for nearby devices that are visible.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Bluetooth, and then tap On/Off to turn on Bluetooth.

• When Bluetooth is first turned on, it scans for nearby Bluetooth devices and displays them.

• To manually perform a new scan, tap Scan.

The Bluetooth pairing process allows you to establish trusted connections between your device and another Bluetooth device. Pairing between two Bluetooth devices is a one-time process. Once a pairing is created, the devices continue to recognize their partnership and exchange information without having to re-enter a passcode.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Bluetooth, and then tap On/Off to turn on Bluetooth.

• Make sure that the target device is discoverable so that your device can find it. Refer to the instructions that came with the device to find out how to set it to discoverable mode.

3. Tap the name of the target device when you see it displayed in the Bluetooth devices section.

• Your device automatically tries to pair with the target device. If automatic pairing fails, enter the passcode supplied with the target device.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth compatible devices.

Once you have paired your device to another device, you can rename the paired device to make it easier to recognize.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Bluetooth, and then tap On/Off to turn on Bluetooth.

3. Tap Settings next to the previously paired device, and then tap Rename.

4. Enter a new name, and tap Rename.

When you unpair from a Bluetooth device, the two devices no longer recognize each other. To connect again, you have to pair the devices.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Bluetooth, and then tap On/Off to turn on Bluetooth.

3. Tap Settings next to the paired device, and then tap Unpair to delete the paired device.

Airplane mode disconnects your device from all networks and turns off connectivity features, such as phone calls and Wi-Fi. While in Airplane mode, you can use other features such as playing music, watching videos, and other offline applications.

To enable or disable Airplane mode:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Airplane mode, and then tap On/Off to enable or disable the option.

Activate Mobile hotspot to allow other devices to use your device’s Internet connection. Use Mobile hotspot and Tethering to share your device’s Internet connection with other devices.

Note: You must have a tethering plan on your service account in order to use Mobile hotspot.

Warning: Mobile hotspot consumes battery power and uses data service.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap On/Off to turn Mobile hotspot on or off.

Use the other device’s Wi-Fi control to connect to Mobile hotspot.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap On/Off to turn on Mobile hotspot.

4. Activate Wi-Fi on the target device.

5. Scan for Wi-Fi hotspots and select the target device (your Mobile Hotspot name) from the list.

6. Enter your device’s Mobile hotspot password on the target device.

Control whether devices connect to your Mobile hotspot with the Allowed devices list. After you add devices to the list, they can scan for your device and connect using your device’s Mobile hotspot name and password.

Note: Using your device as a Mobile hotspot consumes battery power and uses data service. While Mobile hotspot is active, your device’s applications use the Mobile hotspot data service. Roaming while using your device as a Mobile hotspot incurs extra data charges.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap On/Off to turn on Mobile hotspot.

4. Tap More > Allowed devices, and then tap Add to enter the other device’s Device name and MAC address.

5. Tap Add to add the device.

You can change your Mobile hotspot password.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap On/Off to turn on Mobile hotspot.

4. Tap the password and enter a new password.

5. Tap Save.

Manage your Mobile hotspot security and connecting settings.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap More > Configure mobile hotspot for the following settings:

• Network name: View and change the name of your Mobile hotspot.

• Hide my device: Make your Mobile hotspot invisible to other Wi-Fi devices during a scan. Other devices can still connect to your Mobile hotspot, but have to set up the connection manually with your Network SSID and Password.

• Security: Choose the security level for your Mobile hotspot.

• Password: If you choose a security level that uses a password, enter the password. A default password is displayed on the Mobile hotspot screen.

• Show password: Display your password instead of masking it.

• Show advanced options: Access advanced options, including Broadcast channel, and to specify the channel your device uses for Mobile hotspot.

Automatically turn off Mobile hotspot if there are no connected devices.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap More > Timeout settings, and then select an interval.

Your Wi-Fi network may be shared with other devices. Be aware that your device may switch between your saved Wi-Fi networks without notice.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering > Mobile hotspot.

3. Tap More > Wi-Fi sharing for the following options:

• Turn on Wi-Fi sharing

• Turn off Wi-Fi sharing

You can use USB tethering to share your device’s Internet connection with a computer.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile hotspot and tethering.

3. Connect the computer to the device using the USB cable, and then tap USB tethering to turn tethering on.

Monitor how your data is being used, and set limits and restrictions to conserve it.

Note: Your service provider may account for data usage differently.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Data usage for options:

• Data usage cycle: Tap the drop-down menu, and then choose a time period for data usage. Data usage for the period is displayed on the graph, along with usage by application at the bottom of the screen.

• Mobile data: Enable mobile data.

• International data roaming: Enable data roaming on your device.

• Set mobile data limit: Your mobile data connection is turned off when the specified limit is reached.

• By application: View data usage by application.

3. Tap More for the following options:

• Restrict background data: Restrict some apps and services from working unless you are connected to a Wi-Fi network.

• Show/Hide Wi-Fi usage: Display or hide a Wi-Fi tab that shows Wi-Fi usage.

• Restrict networks: Select Wi-Fi networks that are mobile hotspots. You can restrict apps from using these networks, and you can configure apps to warn you before using these networks for large downloads.

• Help: View help topics for data usage.

Control your device’s access to networks and mobile data service.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile networks for options:

• Mobile data: Allow your device to connect to a mobile data network.

• International data roaming: Allow your device to connect to data services while roaming. Significantly higher charges may result.

• Access Point Names: Choose or add APNs.

• Network operators: Choose available and preferred networks.

To search for an AT&T MicroCell:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap Mobile networks.

3. Tap Network operators > Search for AT&T MicroCell.

Your AT&T MicroCell must be installed and activated before you can connect to it. For more information, visit att.com/esupport.

NFC (Near Field Communication) allows data exchange when you touch your device with another compatible device. This is used for features like Android Beam.

Activate NFC to allow your device to exchange data with other NFC devices.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap NFC and payment.

3. Tap On/Off to turn NFC on.

When Android Beam is activated, you can beam app content to another NFC-capable device by holding the devices close together. You can beam browser pages, YouTube videos, contacts, and more.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap NFC and payment.

3. Tap On/Off to turn NFC on.

4. Tap Android Beam, and tap On/Off to turn Android Beam on.

5. Touch the back of your device with another NFC-capable device to transfer content.

Tap and pay allows you to select the default payment application you want to use for making purchases on your device.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap NFC and payment.

3. Tap On/Off to turn NFC on.

4. Tap Tap and pay.

5. Tap Payment for the following options:

• Choose the app that you want as your default.

• Tap If open app supports tap and pay to choose whether you want to always use the default payment application, or use an open app if it supports Tap and pay.

6. Tap Others to choose other types of payment apps.

Scan for nearby devices to connect to and set them up easily. You receive a notification when there are available devices to connect to.

Note: This function uses Bluetooth Low Energy scanning even if Bluetooth is turned off on your device.

To enable nearby device scanning:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > Nearby device scanning.

3. Tap On/Off to enable the feature.

Print images and documents to Samsung printers and other compatible printers (not included).

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > Printing.

3. Tap a print service and follow the prompts.

Note: Tap + Download plug-in to install additional print service drivers.

Mirror your device’s display on your car’s entertainment and information screen using a USB connection.

Note: To use this feature, your car system must support MirrorLink.

To turn on MirrorLink:

1. Connect your device to your car’s system using the USB cable.

2. On your device’s Home screen, tap Apps > Settings > Connections.

3. Tap More connection settings > MirrorLink.

4. Tap On/Off and follow the prompts.

5. Tap More > MirrorLink device ID to view the MirrorLink ID for your device.

Set up and manage your Virtual Private Networks (VPNs). Use the VPN settings menu to add a VPN connection to your device.

Note: You must set a secured screen lock before setting up a VPN. For more information, see Lock Screen and Security.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > VPN.

3. Tap Add VPN and follow the prompts to set up your VPN.

To connect to a VPN:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > VPN.

3. Tap the VPN, enter your log in information, and tap Connect.

To disconnect from a VPN:

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > VPN.

3. Tap the VPN, and tap Disconnect.

Once you have set up a VPN connection, you can edit or delete the connection.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > VPN.

3. Tap Settings next to the VPN that you want to edit or delete.

4. Edit the VPN and tap Save.

– or –

Tap Forget to delete the VPN.

You can reset Wi-Fi, Mobile data, and Bluetooth settings with Reset network settings.

1. From a Home screen, tap Apps > Settings > Connections.

2. Tap More connection settings > Reset network settings.

3. Tap Reset settings, and confirm when prompted.

You can switch between sound modes, while preserving the individual sound settings you have made.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Sound mode, and then choose a mode:

• Sound: Use the sounds, vibrations, and volume levels you have chosen in Sound settings for notifications and alerts.

• Vibrate: Vibrate for notifications and alerts. This uses the Vibration intensity you choose in Sound settings.

• Mute: Mute all sounds and notifications.

Your device can vibrate in addition to ringing when you receive a call.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Vibrate while ringing to enable this option.

Set the system volume level and default volume for call ringtones, notifications, and other audio.

Tip: You can also set the Ringtone volume from a Home screen by pressing the Volume key.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Volume and drag the sliders to set the default volume for:

• Ringtone

• Media

• Notifications

• System

Set the amount of vibration for incoming calls, notifications, and haptic feedback.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Vibration intensity.

3. Drag the sliders to set the various vibration intensities.

Choose from preset ringtones or add your own.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Ringtone.

3. Tap a ringtone to hear a preview and select it.

– or –

Tap + Add ringtone to use an audio file as a ringtone.

Choose from preset vibration patterns or create your own pattern.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Vibration pattern.

3. Tap a pattern to preview and select it.

Choose a sound for notifications, such as for new messages and event reminders.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Notification sound and configure the following options:

• Default notification sound: Choose a default sound for all notifications.

• Messages notifications: Choose a sound for message notifications, and configure vibration and Preview message options.

• Calendar notifications: Choose a sound for calendar notifications, and enable or disable vibration alert.

• Email notifications: Configure email account notifications. An email account must be configured for this option to be available.

This setting allows you to block all notifications and alerts.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Do not disturb.

3. Tap Turn on now to enable this option.

This option allows you to turn Do not disturb mode on or off automatically at scheduled times.

Note: Scheduling is not available if Do not disturb mode has been turned on manually.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Do not disturb.

3. Tap Turn on as scheduled, and set the Days, Start time, and End time.

This option lets you customize which notifications are allowed while your device is in Do not disturb mode.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Do not disturb.

3. Tap Allow exceptions, and tap one of the following options:

• No exceptions

• Alarms only

• Custom

Set various other system sound options.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration, and tap to enable each option:

• Touch sounds: Play tones when you touch or tap the screen to make selections.

• Screen lock sounds: Play a sound when you unlock the screen.

• Charging sound: Play a sound when a charger is connected.

• Vibration feedback: Vibrate when Back or Recent are tapped, and for other actions.

Play tones when the dialing keypad or the keyboard is tapped.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration, and tap to enable each option:

• Dialing keypad tone: Play tone when the dialing keypad is tapped.

• Keyboard sound: Play a sound when the Samsung keyboard is tapped.

• Keyboard vibration: Vibrate when the Samsung keyboard is tapped.

You can enable sound effects when connected to a headset.

Note: Sound effects are only available when headphones or a compatible Bluetooth headset (not included) is connected.

Choose from advanced sound options to customize your audio experience.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Sounds and vibration > Sound quality and effects.

3. Tap Equalizer and choose a setting, or tap Advanced or Basic to customize your sound settings.

4. Tap On/Off to enable each option:

• UHQ Upscaler: Enhance the sound resolution of music and videos for a clearer listening experience.

• Surround: Recreate the effects of rich surround sound.

• Tube Amp Pro: Simulate the soft timbre of a tube amplifier.

• Concert hall: Simulate the reverb of a concert hall.

5. Tap Adapt sound and follow the prompts to customize your sound settings.

Select which apps you want to receive alerts from. Alerts include notifications, sounds, and vibrations.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Notifications.

3. Tap On/Off next to an app to enable or disable notifications.

• Tap Advanced to configure more notification options for individual apps.

Adjust the screen brightness to suit your surroundings or personal preference. You may also want to adjust screen brightness to conserve battery power.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Display.

3. Customize options under Brightness:

• Tap Auto to allow the device to adjust brightness automatically.

• Drag the Brightness slider to set a custom brightness level.

Note: You can also control Brightness from the Notification panel.

You can set the font size and style for all text that is displayed on the screen.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Display > Font to choose a font size and style.

• Drag the slider to adjust the font size.

• Tap a font style to select a font, or tap + Download fonts to find new fonts from Galaxy Apps.

3. Tap Done to set the font size and style.

You can show icons with a shaded background to make them stand out on the Home screen and Apps list screen.

1. From a Home screen, tap Apps > Settings > Device.

2. Tap Display > Icon backgrounds and choose one of the following options:

• Icons with backgrounds: Show icons with shaded backgrounds.

• Icons only: Show icons only.

3. Tap Done, and confirm when prompted.