Free English ATD TOOLS SABER II ATD-80390 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ATD TOOLS SABER II ATD-80390 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the features and specifications of the ATD TOOLS SABER II ATD-80390?
The features and specifications for the ATD TOOLS SABER II ATD-80390 are as follows:
• 90 Super bright SMD LED
• 7.4V 1700mAh Li-ion rechargeable battery
• Up to 2.5~3 hours of continuous use
• With Automatic shut off and over charge protection, prolongs battery life
• Impact protection, ergonomic grip handle and bumper
• Easy operating switch
• 2 pc 360 degree rotating hook
• UL listed Charger
How do I operate and charge the ATD TOOLS SABER II ATD-80390 work light?
• To use, plug the unit into any 110-120 VAC power source, such as a wall receptacle. Let the unit fully charge until the green indicator on the charger turns on before use.
• Charge this light every month if not in constant use, and after each use, if it is used often to insure longevity.
• Press the switch at the bottom of the handle to turn unit on, press the switch again to turn it off.
What are the safety cautions for using the ATD TOOLS SABER II ATD-80390?
• For indoor use only – don’t use in or around tubs, showers, sinks, pools, hot tubs, or in a wet environment
• Use only the recommended voltage and frequency requirements
• Keep out of reach of children
• Do not operate light with wet hands.
• Keep lamp away from hot objects.
What are the replacement parts and ordering numbers for the ATD TOOLS SABER II ATD-80390?
| ITEM# | ORDERING PART# | PART DESCRIPTION |
|---|---|---|
| 1 | PRT80330-01 | TOP HOOK ASSY (1, 2, 3, 21 & 22) |
| 2 | PRT80330-01 | TOP HOOK ASSY (1, 2, 3, 21 & 22) |
| 3 | PRT80330-01 | TOP HOOK ASSY (1, 2, 3, 21 & 22) |
| 4 | PRT80330-04 | TOP CAP |
| 5 | PRT80390-05 | LOGO PAPER |
| 6 | PRT80390-06-07 | PCBA ASSY |
| 7 | PRT80390-06-07 | PCBA ASSY |
| 8 | PRT80390-08 | TUBE |
| 9 | PRT80390-09 | WIRE |
| 10 | PRT80330-10 | BATTERY COVER |
| 11 | PRT80330-11 | LI-ION BATTERY |
| 12 | PRT80330-12 | SCREW |
| 13 | PRT80330-13 | CHARGER |
| 14 | PRT80330-14 | SWITCH CONNECTOR |
| 15 | PRT80330-15 | ON/OFF SWITCH |
| 16 | PRT80330-16 | DC POWER INLET |
| 17 | PRT80330-17 | NUT |
| 18 | PRT80330-18 | END HOOK ASSY (18, 19, 20, 21 & 22) |
| 19 | PRT80330-18 | END HOOK ASSY (18, 19, 20, 21 & 22) |
| 20 | PRT80330-18 | END HOOK ASSY (18, 19, 20, 21 & 22) |
| 21 | N/A | PART OF HOOK ASSY |
| 22 | N/A | PART OF HOOK ASSY |
| 23 | PRT80330-23 | HANDLE |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ATD TOOLS SABER II ATD-80390 (01) PDF DOCUMENT