Free English ASPIRE K4 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE K4 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I fill the ASPIRE K4 tank?
Filling the ASPIRE K4 tank is a simple process. Unscrew the top hardware from the atomizer. Inject your favorite e-liquid into the tank, taking care not to overfill or allow the e-liquid to go into the central airflow tube. Screw the top hardware back onto the atomizer.
How do I replace the ASPIRE K4 atomizer head?
To replace the atomizer head on your ASPIRE K4, first unscrew the top hardware from the atomizer. Then, unscrew the old atomizer head and replace it with a new one. Finally, screw the top hardware back onto the atomizer.
How do I charge the ASPIRE K4 battery?
To charge your ASPIRE K4 battery, simply plug the Micro USB cable into the Micro USB port on the battery and connect the other end to a suitable power source. The battery will indicate its charging status.
What are the specifications of the ASPIRE K4 Quick Start Kit?
The ASPIRE K4 Quick Start Kit has the following specifications:
| K4 Tank | K4 Battery |
|---|---|
| 22mm*58mm | 22mm*84mm |
| 2.0ml capacity | 2000mah capacity |
| Pre-installed with a Clapton 0.27Ω coil | By-pass output |
| DELRIN Drip Tip | Micro USB charging |
| PYREX Glass | Standard 510 threading |
| Carbon fiber coated |
How do I operate the ASPIRE K4?
To operate the ASPIRE K4:
1. Power on/off: Press the fire button 5 times in succession within 2 seconds. The LED light will flash 3 times to indicate the ASPIRE K4 is on/off.
2. Vaping: Press the fire button and inhale at the same time.
3. Charging: The K4 battery is charged via a Micro USB port. The maximum charge current can reach up to 1A. When the ASPIRE K4 battery is charging, the LED will be red. Once the battery is fully charged, the LED will turn green.
4. Indicator light:
* Blue LED: Battery voltage is between 3.8V-4.2V.
* Orange LED: Battery voltage is between 3.2V-3.8V.
What safety features does the ASPIRE K4 have?
The ASPIRE K4 incorporates several safety features:
1. Automatic cutoff: If the fire button is pressed for 10 seconds or more, the ASPIRE K4 will stop working, and the LED light will flash 10 times.
2. Low voltage protection: When the ASPIRE K4 battery voltage is below 3.2V (low battery), the Orange LED light will flash 15 times, and the ASPIRE K4 will automatically turn off.
3. Short circuit protection: If a short circuit occurs, the LED lights (both blue and orange) will flash 3 times, and the ASPIRE K4 will stop working.
4. Overcharge protection: When the ASPIRE K4 battery is fully charged, it will stop charging automatically.
CLICK HERE TO DOWNLOAD ASPIRE K4 (01) PDF DOCUMENT