FREE ENGLISH ASKO DBI664 XXLS (01) PDF USER GUIDE
FREE ENGLISH ASKO DBI664 XXLS (01) PDF USER MANUAL
FREE ENGLISH ASKO DBI664 XXLS (01) PDF OWNER GUIDE
FREE ENGLISH ASKO DBI664 XXLS (01) PDF OWNER MANUAL
FREE ENGLISH ASKO DBI664 XXLS (01) PDF REFERENCE GUIDE
FREE ENGLISH ASKO DBI664 XXLS (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ASKO DBI664 XXLS (01) PDF REFERENCE MANUAL
FREE ENGLISH ASKO DBI664 XXLS (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ASKO DBI664 XXLS (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ASKO DBI664 XXLS (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ASKO DBI664 XXLS (01) PDF SUMMARY:
How do you switch on the dishwasher?
To switch on the dishwasher, press and hold the main power switch until the display lights up.
What is shown on the display the first time the dishwasher is switched on?
“Welcome to your new ASKO. This is a first time set up.” is shown on the display the first time the dishwasher is switched on.
What should you do to ensure good dishwashing results?
It is important that you choose the right settings to ensure good dishwashing results.
What basic precautions should be followed when using the dishwasher?
- Read all instructions before using the dishwasher.
- Use the dishwasher only for its intended function.
- Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children.
How should you load sharp items in the dishwasher?
- Locate sharp items so that they are not likely to damage the door seal.
- Load sharp knives with the handles up to reduce the risk of cut-type injuries.
What should you do before washing plastic items in the dishwasher?
Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
When should you not operate the dishwasher?
- Do not operate the dishwasher unless all enclosure panels are properly in place.
- Do not tamper with controls.
- Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
What should you do to reduce the risk of injury?
To reduce the risk of injury, do not allow children to play in or on a dishwasher.
What should you do if a hot water system has not been used for two weeks or more?
If the hot water system has not been used for two weeks, before using the dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
What should you do when removing an old dishwasher from service or discarding it?
Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.
What should you not do while the dishwasher is running?
Do not run the dishwasher while you are out of the home.
What should you not store or use near the dishwasher?
Do not store or use combustible materials, gasoline, or other flammable vapors and liquids in the vicinity of the dishwasher or any other appliance.
What should you do before servicing the dishwasher?
Disconnect electrical power to the dishwasher before servicing.
Who should perform repairs on the dishwasher?
Repairs should be done by a qualified technician.
What should you do if a child swallows dishwasher detergent or rinse aid?
Should a child swallow dishwasher detergent or rinse aid, give plenty to drink immediately, i.e., one or two glasses of milk or water. Do not try to induce vomiting. Seek medical advice immediately: Call the National Capital Poison Center at 1-800-222-1222.
What should you do after putting detergent in the dishwasher?
Always close the door and start the dishwasher as soon as you put in the detergent.
What should you do to keep small children safe around an open dishwasher?
Always keep small children away from the machine when it is open. There may be some detergent residue left inside the machine.
What should you do if dishwasher detergent gets in someone’s eyes?
If dishwasher detergent gets in someone’s eyes, rinse them with plenty of water for at least 15 minutes.
How do you activate the child lock (KidSafe™)?
You can activate the child lock (button lock) to prevent children from starting the dishwasher. See the chapter Settings.
Where should you store the dishwasher during the winter?
Store the dishwasher where the temperature remains above freezing.
How should you transport the dishwasher?
Transport the dishwasher upright or laying on its back.
What happens when the overflow protection is triggered?
The overflow protection starts pumping out the machine and turns off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow protection is triggered, turn off the water supply and call the Customer Care Center.
What should you do with the packaging material?
Separate the different packaging material to help reduce raw material use and waste.
What should you do when the dishwasher has reached the end of its service life?
When the machine has reached the end of its service life and is to be disposed of, it should immediately be made unusable. Pull out the power cable and cut it as short as possible.
What should you do to check the water hardness?
Contact the local water utility to check the water hardness in your area.
Why is it important to check the water hardness?
This is important to determine how much detergent and rinse aid to use. In general, more rinse aid and detergent are needed for hard water.
How do you switch on the dishwasher for first time settings?
To switch on the dishwasher, press and hold the main power switch until the display lights up. “Welcome to your new ASKO. This is a first time set up.” is shown on the display.
What settings can be selected on first time set up?
You can select the language to be shown on the display, and the rinse aid dosage.
How do you select the rinse aid dosage?
Select rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High dosage).
What is the factory pre-selected rinse aid dosage?
The factory pre-selected rinse aid dosage is 5.
How do you open the rinse aid compartment lid?
Press to open.
How do you add rinse aid?
Carefully top up with rinse aid. Only add rinse aid to the level marked max.
What should you do after adding rinse aid?
Wipe up any spilled rinse aid around the compartment and close the lid firmly.
What does it mean when the rinse aid symbol lights on the display?
When the rinse aid needs topping up, the above symbol lights on the display.
What should you do if the dishes have water marks?
Increase the rinse aid dosage.
What should you do if the dishes have a sticky white/blue film?
Reduce the rinse aid dosage.
What should you do if the dishes are streaked?
Reduce the rinse aid dosage.
What should you do if there is heavy foaming?
Reduce the rinse aid dosage. If you have very soft water, the rinse aid can be diluted 50:50 with water.
How do you achieve energy-efficient dishwashing?
- Run programs only with a full load.
- Wait until the dishwasher is fully loaded before running a program, this way you save energy.
- Use the Rinse and hold program to rinse the dishes if there are any unpleasant odors while you wait for the dishwasher to become fully loaded.
How can you save energy when washing lightly soiled dishes?
If the dishes are only lightly soiled, you can select a program with a low temperature.
What is Green mode?
To save energy and water, use Green mode.
What can improve drying results after a program has ended?
Better drying results are achieved if you open the door a little once the program has ended.
What should you do with large food particles before loading the dishwasher?
Simply scrape off large food particles before loading the dishwasher.
What kind of detergent should you choose?
Choose a green detergent. Read the environmental declaration on the packaging!
When should you connect the dishwasher to the cold water supply?
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity, or gas.
When should you connect the dishwasher to the hot water supply?
Connect the dishwasher to the hot water supply (max. 160 °F (70 °C)) if the building is heated using an energy-efficient means such as district heating, solar power, or geothermal power. Choosing a hot water connection cuts dishwashing times and reduces the dishwasher’s energy consumption.
What should you not exceed in terms of water supply temperature?
Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand strong heat.
What kind of cookware is not dishwasher safe?
Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high temperatures, others can be damaged by dishwasher detergent.
What kind of items should you use caution with when washing in the dishwasher?
Use caution with, for example, handmade items, fragile decoration, crystal/glassware, silver, copper, tin, aluminum, wood, and plastic. Look for the “Dishwasher safe” marking.
What kind of porcelain should not be washed in a dishwasher?
Porcelain with decoration on top of the glazing (the items feel rough) should not be washed in a dishwasher.
How should you wash fragile items made of crystal/glass?
Wash fragile items made of crystal/glass, such as crystal glass from Orrefors, using the gentle dishwashing program Crystal glass. Remember to use a small amount of detergent and to place items so that they do not touch each other during the wash.
What kind of glassware should not be washed in a dishwasher?
Hand-painted glassware, as well as antique and very fragile items, should not be washed in a dishwasher.
What happens if silver and stainless steel items come into contact in the dishwasher?
Silver and stainless steel items should not come into contact, as the silver can become discolored.
What can happen to aluminum if washed in a dishwasher?
Aluminum can lose its shine if washed in a dishwasher. However, good quality aluminum pans can be washed in a dishwasher, even if some of the shine will be lost.
What can happen to cutlery with glued handles in the dishwasher?
Some types of glue are not dishwasher safe. In such cases, the handles may loosen.
What are the points to consider when loading dishes?
- All dirty surfaces should face in and down!
- Dishes should not be placed in or on each other.
- Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items.
- Place the upper basket in its highest position when dishwashing very large plates.
- Make sure small items cannot fall through the dishwasher basket; place them in the top cutlery tray.
What should you check before starting a program?
Check that the spray arms can rotate freely.
What does the dishwasher include?
The dishwasher includes a top cutlery tray, an upper basket, and a lower basket with a cutlery basket.
What can be placed in the top cutlery tray?
The top cutlery tray accommodates cutlery, ladles, whisks, and other utensils.
How do you raise the top cutlery tray?
- Remove the top cutlery tray.
- Pull the two locking handles forward on each side to raise the top cutlery tray.
How do you lower the top cutlery tray?
- Make sure the upper basket is in the lowest position.
- Remove the top cutlery tray.
- Slide the two locking handles down and back to lower the top cutlery tray.
What can be placed in the upper basket?
Place glasses, cups, bowls, side plates, and saucers in the upper basket. Place all soiled surfaces down! Place wine glasses on the wine shelf. Place knives on the knife stand, if applicable.
How do you raise the upper basket?
- Pull out the upper basket.
- Grab the sides of the upper basket with both hands and lift it up.
How do you lower the upper basket?
- Pull out the upper basket.
- While holding the basket, pull out the two locking handles on either side to lower the upper basket.
What can be placed in the lower basket?
Place plates, side plates, serving dishes, pots, and cutlery (in the cutlery basket) in the lower basket.
Where should you place pots and pans in the lower basket for the best cleaning results?
Place pots and pans in the right rear of the lower basket for the best cleaning results from the two rear spray nozzles (WideSpray™), which are intended for these types of dishes.
How do you lower the foldable tines?
Lower the foldable tines when washing large pots. Release the foldable tines by pressing the catch inward before adjusting their position.
How do you wash large plates in the lower basket?
Move adjustable tines and their mounts to widen the distance between the tine rows to adapt the lower basket to plates with a diameter greater than 9 3/4" (25 cm).
How should cutlery be placed in the cutlery basket?
Place cutlery with the handles facing down, except for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other.
Where is the cutlery basket best placed for optimal dishwashing?
The cutlery basket is best placed in the middle at the front of the lower basket to best utilize dishwashing performance from the unique spray nozzle (Power Zone Cutlery™), which is intended for the cutlery basket.
Where should knives and other pointed items be placed?
Knives and other pointed items must be placed with the points down in the cutlery basket or horizontally in other baskets.
What is the fold-down section in the cutlery basket for?
The cutlery basket has a fold-down section in the middle for small items, or small shafts, such as electric whisk attachments.
Where can you buy an extra cutlery basket?
This accessory is available where you bought the dishwasher.
Where do you add detergent?
Press to open.
Where is the prewash detergent compartment located?
The prewash detergent compartment is number 1.
Where is the main wash detergent compartment located?
The main wash detergent compartment is number 2.
How is detergent added?
Detergent is added according to water hardness. Follow the instructions on the detergent packaging.
What happens if you use too much detergent?
Too much detergent can result in less effective dishwashing and also entails greater environmental impact.
What should you make sure of when adding detergent?
The detergent compartment must be dry when adding detergent.
If using powder or liquid detergent, how much should be added to the prewash compartment?
If powder or liquid dishwasher detergent is used, add a small amount of the detergent to the prewash compartment.
What kind of detergent should you use?
Use only dishwasher detergent!
Why should you not use liquid hand-washing detergent in a dishwasher?
Liquid hand-washing detergent must not be used as the foam that forms prevents the dishwasher from operating effectively.
What should you do if a dishwasher tablet is difficult to fit in the dispenser?
Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and cannot open correctly.
When are dishwasher tablets not recommended?
Dishwasher tablets are not recommended for short programs (less than 75 minutes). Use powder or liquid dishwasher detergent instead.
What should you do when using all-in-one detergent?
There are many types of all-in-one detergents on the market. Read through the directions for these products carefully.
How are optimal washing and drying results achieved?
Optimal washing and drying results are achieved by using normal dishwasher detergent together with separately dispensed rinse aid.
How do you start the dishwasher?
Press and hold the main power switch until the display lights up. Also check that the water supply valve is on.
How do you select a program?
To select a program, press the Navigation button or until the desired program is shown on the display.
How do you choose the right program?
Select a program to suit the type of dishes and how dirty they are.
What is the normal wash program recommended for?
This program is recommended for daily, regular, or typical use to completely wash a full load of normally soiled dishes, such as plates, serving dishes, cups, and glasses. No options are recommended.
What is the ECO wash program most effective for?
This program is most effective in terms of combined energy and water consumption.
What is the sanitation wash program intended for?
An effective program for daily use with slightly dried leftovers. (This program is not intended for burnt food, such as on oven dishes.).
How does the Time program work?
The program adapts to the specified running time or finish time. With this program, it is important to choose a time suited to how dirty the dishes are.
What is the Rinse and hold program used for?
Use to rinse dishes while you wait for the dishwasher to become fully loaded.
What is the Plastic wash program intended for?
A program intended for washing plastic items that are dishwasher safe. This program has an extra long drying cycle. Porcelain and glasses can also be washed.
What is the Hygiene wash program recommended for?
This program is recommended for baby bottles and cutting boards when additional sanitation is required. The temperature is high in the main wash and in the final rinse.
What is the Crystal glass program intended for?
A gentle dishwashing program with a low temperature for washing fragile items made of crystal/glass, such as crystal glass from Orrefors. Remember to use a small amount of detergent and to place items so.
What is the Self-cleaning program for?
Self-cleaning program for sanitizing the dishwasher tub, spray arms, and spray pipes.
How should the Self-cleaning program be run?
This program should be run (with no dishes in the machine) using regular dishwasher detergent or citric acid. Special dishwasher cleaners are also available in stores. For the removal of limescale deposits, see The dishwasher tub in the chapter Care and maintenance instructions.
What is the Upper half program for?
You can use this program if you only have cups and glasses that need washing in the upper basket. Lightly soiled dishes can also be placed in the lower basket.
What is the Lower half program for?
You can use this program when you only want to wash plates and cutlery in the lower basket. Lightly soiled dishes can also be placed in the upper basket.
How do you select a program mode?
To select a program mode, press the program mode selector until the desired mode is shown on the display.
How can you get a brief description of the program modes?
For a brief description, press and hold the program mode selector.
What does Green mode do?
The dishwasher uses less energy and water. The program time is extended.
What does Speed mode do?
The program time is shortened, but the dishwasher uses more energy and water.
What does Night mode do?
Lower noise level during the dishwashing program. The program time is extended.
What does Intensive mode (Heat Boost) do?
Improves the dishwashing results, but the dishwasher uses more energy and water. The program time is extended.
How do you select an option?
To select an option, press the option button until the desired option is shown on the display.
What does the Extra Dry option do?
A higher temperature in the final rinse and a longer drying cycle improve the drying results if you activate this option. Energy consumption is slightly increased.
How can you get a brief description of the Extra Dry option?
For a brief description, press and hold the button for Extra Dry.
How does Delayed Start work?
When you select Delayed Start, the dishwasher will start 1-24 hours after you have pressed the button Start/Stop and closed the door.
How do you activate Delayed Start?
- Press the button once to activate Delayed Start. Press the button several times – or hold it in – to set the desired number of hours.
- Press Start/Stop and close the door. The timer counts down and the dishwasher starts after the selected delay.
How do you cancel the Delayed Start option?
If you want to cancel the Delayed Start option, open the door and press and hold the main power switch until the display turns off.
How do you start the dishwasher?
Press and hold Start/Stop until the display shows “Program started, close door in 4 sec”. This indicates that the dishwasher is ready to start. Close the door properly within four seconds, otherwise the dishwasher will not start.
What happens if the dishwasher is not started or the door is not closed within 2 minutes?
If the dishwasher is not started or the door is not closed within 2 minutes of the last button press, the machine switches off.
What is displayed after a program is chosen?
Once you have chosen a program, program mode, and options, the time the program took when last used is displayed.
What does the blue status light indicate?
The program has started, but you can still load more dishes.
What does the red status light indicate?
You should not load more dishes (can result in poor dishwashing).
What does the flashing red status light indicate?
Flashing red indicates a problem. See also the chapter Troubleshooting.
What does the green status light indicate?
The dishwashing program is finished. Standby light for 60 minutes.
How do you stop or change a program after starting the dishwasher?
If you want to change the program after starting the dishwasher, open the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop, and close the door within four seconds.
How do you load more dishes after the program has started?
Open the door. The dishwasher stops automatically. Add the dishes. Press Start/Stop and close the door within five seconds.
What is shown on the display when the door is open during a program?
If the door is open, “Program paused” is shown on the display.
What happens if the dishwasher is turned off due to a power failure?
If the program was not finished, the interrupted program resumes when power is restored.
What happens during drying if the power is cut or the door is open for more than 2 minutes?
During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes.
What is shown on the display once the program has finished?
Once the program has finished and the door is opened, “END” appears on the display.
What happens at the end of the program?
At the end of the program, one short signal will sound.
What should you do to minimize the risk of leaks?
To minimize the risk of leaks, we recommend that you turn off the water supply valve if away from home for an extended period of time.
How can you get the best drying results?
- Fully load the dishwasher.
- Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items.
- Top up with rinse aid or increase the rinse aid dosage level.
- Activate the Extra Dry option.
- Activate the High temperature setting. See the chapter Settings.
- Open the door a little once the program has finished.
- Allow the dishes to cool before unloading the dishwasher.
How should you unload the dishwasher?
Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes in the lower basket.
How do you open the dishwasher’s Settings menu?
To open the dishwasher’s Settings menu, press the Navigation button or until Settings menu is shown on the display and confirm your selection with the mode selector.
How do you exit the dishwasher’s Settings menu?
To exit the dishwasher’s Settings menu, select Exit and confirm your selection with the mode selector.
What settings can be adjusted?
- Language
- Programs that can be shown or hidden in the menu
- Child lock
- Contrast of the display
- Setting to hide the logo shown on the display
- Feedback sound
- Buzzer volume
- Rinse aid dosage
- Super rinse
- High temperature.
How do you temporarily deactivate and activate the child lock?
To temporarily deactivate and activate the child lock, press and hold the left Navigation button and the option button Delayed Start for 3 seconds.
What is Super rinse and which programs is it activated in?
Super rinse adds two extra rinses. It is activated in the following programs: Normal wash, ECO wash, Sanitation wash, Plastic wash, Lower half, Upper half.
What does activating High temperature do, and which programs is it activated in?
Activate the setting High temperature to improve the dishwashing results. Energy consumption is slightly increased. It is activated in the following programs: Normal wash, ECO wash, Sanitation wash, Plastic wash, Lower half, Upper half.
What does the coarse filter do?
The coarse filter traps larger food particles, which cannot get past the drain pump.
How do you empty the coarse filter?
- Lift the coarse filter by the handle.
- Empty the coarse filter. Remember to replace it!.
What does the fine filter do?
Debris that collects on the fine filter is automatically rinsed away during each wash.
How do you clean the fine filter?
- Turn the handle counterclockwise.
- Lift the filter straight up using the handle. Remove the coarse filter to clean the fine filter.
- Replace in reverse order. Check that the edges seal properly when replacing the fine filter.
- Lock the filter in place by turning the handle clockwise to the stop position. The handle should point straight out from the dishwasher.
When should you clean the fine filter?
Clean the fine filter when necessary.
Can the dishwasher be used without the filters?
The dishwasher must not be used without the filters in place!
What can be affected if the coarse filter is incorrectly fitted?
Dishwashing results may be affected if the coarse filter is incorrectly fitted.
How do you remove debris from the spray arms?
Remove debris using a needle or similar item.
How do you remove the top spray arm?
- The upper basket must be removed before the top spray arm can be released. Extend the upper basket then rotate the basket catch on each runner outward (see illustration). Remove the basket.
- Remove the top cutlery tray. Push the top spray arm up and turn the spray arm bearings counterclockwise to remove the spray arm.
How do you remove the upper spray arm?
- Pull out the upper basket.
- Unscrew the spray arm bearings counterclockwise to remove the spray arm from the upper basket.
How do you remove the lower spray arm?
Pull the lower spray arm straight up to release it.
How should you clean the sides of the door and the door seal?
Regularly clean the sides of the door and the door seal. Use a slightly damp cloth (with a little cleaner if necessary).
How should you clean the display panel?
Keep the buttons clean and free from grease. Wipe them clean with a dry or slightly damp cloth. Never use cleaners – they can scratch the surface. Use the main power switch to turn off the dishwasher before cleaning the buttons to avoid activating any buttons unintentionally.
What is the dishwasher tub made of?
The dishwasher tub is made of stainless steel and is kept clean through normal use.
What should you do if limescale deposits build up in the dishwasher?
If you have hard water, limescale deposits may build up in the dishwasher. If this happens, run the Self-cleaning program with two tablespoons of citric acid in the detergent compartment (with no dishes).
What should you never use to clean the dishwasher?
Never use anti-freeze, Draino®, CLR®, or other chemical cleaners.
What should you do if the dishwasher still contains water after the program has finished?
If the dishwasher still contains water after the program has finished, something may be blocking the drain pump. Such items are easily removed.
How do you unblock the drain pump?
- Turn off the machine using the main power switch and unplug it from the power outlet.
- Remove the coarse filter and the fine filter.
- Scoop out the water from the dishwasher tub.
- In order to inspect the drain pump, remove the colored stop on the right in the bottom drain.
- Turn the pump wheel located behind the drain pump stop by hand. Carefully remove any items.
- Replace the drain pump stop along with the fine and coarse filters.
- Plug the machine in again.
What should you do if the dishwasher still does not start and a whirring sound is heard?
If the dishwasher still does not start and a whirring sound is heard, the overflow protection has been triggered.
- Shut off the water.
- Unplug the unit from the power outlet.
- Call the Customer Care Center.
What should you do if the display shows “Overfilling water 1F10”?
Clear the drain pump. See the section Care and maintenance instructions. If the problem persists, call the Customer Care Center.
What should you do if the display shows “Water outlet fault F11”?
See “Water remains in the dishwasher above the filters” in the table “Problem” below. If the problem persists, call the Customer Care Center.
What should you do if the display shows “Water inlet fault F12”?
Check that the water supply valve is on. If the problem persists, call the Customer Care Center.
What is the water pressure required for the dishwasher?
The water pressure should be 4.2-140 psi.
What should you do if the display shows “Inlet valve leakage F40”?
Turn off the water supply valve and call the Customer Care Center.
What should you do if the display shows “Water level fault F52”?
Call the Customer Care Center.
What should you do if the display shows “Overfilling water 2 F54”?
Turn off the water supply valve and call the Customer Care Center.
What should you do if the display shows “Circ. pump fault F56”?
Call the Customer Care Center.
What should you do if the buttons do not react when pressed?
Wait a moment then try again. You have pressed the buttons too soon after opening the door.
What should you do if the buttons do not react when pressed and the child lock is activated?
See the chapter Settings. Child lock (button lock) activated.
What should you do if the buttons do not react when pressed and the door is closed?
Open the door. The buttons only react to use when the door is open.
What should you do if the buttons are dirty?
Clean with a dry or slightly damp cloth.
What should you do if you cannot close the door?
Check that the baskets are correctly positioned horizontally. The baskets are not correctly positioned.
What should you do if the dishwasher does not start and the start button was pressed for too short a time?
Press and hold Start/Stop until the display shows “Program started, close door in 4 sec”.
What should you do if the dishwasher does not start because the door was not closed properly?
Close the door within four seconds, otherwise the dishwasher will not start.
What should you do if you opened the dishwasher to add more dishes while a program is in progress and the dishwasher does not start?
If you want the dishwashing program to continue, press Start/Stop and close the door within five seconds.
What should you do if the dishwasher does not start because a fuse or circuit breaker has been tripped?
Check. A fuse/circuit breaker has been tripped.
What should you do if the dishwasher does not start because the plug is not plugged in?
Check. The plug is not plugged into the power outlet.
What should you do if the dishwasher does not start because the water supply valve is turned off?
Check. The water supply valve is turned off.
What should you do if the dishwasher does not start because of an overflow or leak?
Turn off the water supply valve. Pull out the plug and call the Customer Care Center.
What should you do if you hear a whirring sound from the dishwasher that does not stop when the main power switch is turned off?
A whirring sound (the drain pump) is heard from the dishwasher and does not stop when the main power switch is turned off.
What should you do if the dishwasher does not start and you have selected the Delayed Start option?
Press and hold Start/Stop for three seconds if you want to cancel the Delayed Start option.
CLICK HERE TO DOWNLOAD ASKO DBI664 XXLS (01) PDF MANUAL