ANTHEM AVM 90 (01) PDF MANUAL

ANTHEM AVM 90 (01) PDF SUMMARY:

How do I install batteries in the remote control?

Install batteries in the remote control in the directions shown in the illustration.

What is the optimal range of operation for the remote control?

The remote control operates best when used within a range of 6m (20ft) and within a 30˚ angle.

How do I connect my MRX/AVM to the network using an Ethernet cable?

To connect via Ethernet, simply take an ethernet cable that is connected to your network and plug it into the MRX/AVM’s Ethernet port on the rear of the unit.

How do I connect my Apple device to the wireless network?

1. Ensure your Apple device is connected to the wireless network you wish to connect the Receiver/ Processor to.
2. Enter the Wi-Fi Settings Menu.
3. Locate MRX/AVM under “Set up new AirPlay speaker.”
4. Select the unit you wish to connect and allow it to connect to your network. Note: The Receiver/Processor will appear as MRX/AVM in the AirPlay speaker menu.

How do I connect my Android device to the wireless network?

1. Download and open the Google Home application.
2. You should be prompted that there is a device available for setup. If not, tap “x” followed by “Setup a Device”.
3. Select the MRX/AVM and follow the instructions on screen.
4. To listen to cast audio from any supported application on your MRX/AVM, ensure your device is connected to the same network as the MRX/AVM.
5. Tap the Chromecast built-in icon from within the application and select the MRX/AVM as the playback device. Note: If you connect to your network before connecting speakers, you will not hear the connection chime.

How do I access the Anthem Web User Interface?

1. Identify your MRX/AVM’s IP address by going to the Front Panel Menu: Setup Menu > Network/Control > IP Configuration.
2. Use a browser such as Safari or Google Chrome.
3. After opening your browser, enter the IP address into the URL bar.

How do I navigate the Front Panel Menu using the remote control?

Press SETUP to enter the menu. Once in the menu, you can use the UP/DOWN/LEFT/RIGHT and ENTER buttons to navigate and make changes.

How do I navigate the Front Panel Menu using the Front Panel Buttons?

Press MENU to enter the menu. Once in the menu, you can use PREV/NEXT/VOLUME KNOB and SELECT to navigate and make changes.

What are Virtual Inputs?

Anthem products use “Virtual Inputs,” which means that no physical input is tied to any input that is made or created. You can create and specify combinations you want. For example, you can make an input using HDMI 1 for video and HDMI for audio, then make a second input using HDMI 1 for video and RCA for audio. Another example would be to make 2 separate inputs using the exact same audio and video inputs but different speaker profiles. You can make up to 30 different Virtual Inputs allowing for a lot of customizability.

What are the pre-made inputs on my MRX/AVM?

The MRX/AVM comes with premade inputs, which include: HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDMI 6, HDMI 7, eARC, Streaming, Bluetooth, Optical 1, Coax 1, Analog 1, & Phono (AVM Models Only). These inputs can be deleted or modified.

What is Anthem Room Correction (ARC)?

Anthem Room Correction (ARC) is a technology that adjusts the frequency response, level and phase of each individual speaker and subwoofer. It ensures your system will sound its best in any environment. It preserves the unique quality of your space and provides a natural and balanced sound.