ANKO 28BN01 (01) PDF Document

The package for the ANKO 28BN01 includes:

> Noise Cancelling Pro Earphones

> Charging cable

> Use manual

Model No: 28BN01

Version: V5.4

Support profiles: A2DP, AVRCP, HFP

Working Distance: 10 meters

Music Time: APPROX 5 HOURS (AT 80% VOLUME)

Talk time: Up to 3 Hours

Standby time: Up to 30 Hours

Charging voltage: DC 5V

Charge time: earbuds 1.5 hours, charge box 2 hours

Cable length: 0.3m

Power ON

Option 1: Press and hold both earbud touch buttons for 4 seconds.

Option 2: Take the earbuds out of the charge case.

Power OFF

Option 1: Press and hold both earbud touch buttons for 8 seconds.

Option 2: Put the earbuds back into the charge case.

1. Once the earbuds are powered on, they will enter pairing mode (the LED will flash) and will attempt to pair with the last paired device if available.

2. Go to the Bluetooth menu on your mobile phone and pair the earbuds. The Bluetooth name is ‘anko43582310’.

3. Once paired, you will hear a pairing tone.

Play: Click the L or R side earbud MFB (Multi-Function Button).

Pause: Click the L or R side earbud MFB.

Next song: Double click the R side earbud MFB.

Previous song: Double click the L side earbud MFB.

Volume up: Triple click the R side earbud MFB.

Volume down: Triple click the L side earbud MFB.

Pick up/hang up phone calls: Double click the L or R earbud touch button.

Reject incoming calls: Press and hold either earbud touch button for 2 seconds.

To use the voice assistant, long press the R side earbud for 2 seconds until you hear a beep, then release your hand to switch.

Long press the L side earbud for 2 seconds to switch between the noise-control modes: ANC (Active Noise Cancellation), noise cancellation-off, and transparency.

Click the touch button 4 times to turn Spartial sound on or off.

Click the touch button 5 times to switch between Game and Music modes.

The ANKO 28BN01 true wireless earbuds are powered by a rechargeable Li-ion battery. Please use the accessory USB cable to recharge the battery.

1. Insert the USB charging cable into a suitable USB port.

2. Connect the charging cable with the charge box USB port.

The charge time is approximately 1.5 hours for the earbuds and 2 hours for the charge box.

– This product shall not be connected to a power supply source exceeding PS1 (5V d.c. 1A).

– The battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitude during use, storage, or transportation.

– Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.

– Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.

– A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

– Earbuds shall be charged by the supplied charging unit only.