ANKO JLR-80640 (01) PDF Document

Please read the manual carefully before use.

Recommend keeping this manual for future reference.

Icons for reference only. If there are any updates, please refer to the actual product.

Please make sure your car supports wired CarPlay/Android Auto.

Required iPhone6 or later iPhone models with IOS 10 or above for wireless CarPlay function.

Required an Android smartphone that support latest Android Auto function and with Android 11 or higher of the Android operating system for wireless Android Auto function.

Method 1: Connect your iPhone or Android smartphone to your car by USB cable and see if the CarPlay or Android Auto logo appears on your car display.

Method 2: Check the compatible list or check with your car manufacturer to see if your car has this capability.

1. Start the car and wait for the car head unit system to be loaded.

2. Connect the Wireless CarPlay /Android auto adaptor to the USB-A or USB-C port in your car. Please be sure to plug the adaptor into the port that is for wired apple CarPlay or android auto.

3. Open Wi-Fi and Bluetooth on your iPhone/Android smartphone and find the Bluetooth named “anko43559268-****”.

1) iPhone: find Bluetooth named “anko43559268-****” then select Pair-Allow-Connect.

2) Android: find Bluetooth named “anko43559268-****” and select Pair.

4. You are ready to enjoy wireless CarPlay or wireless Android Auto.

We need to connect the Bluetooth, not Wi-Fi. After Bluetooth matching is successful, Wi-Fi will automatically connect. So no need Wi-Fi password. Make sure your Wi-Fi is turned on and unoccupied when pairing.

1) If your car has use the android auto function for the first time, please use your data cable to connect your phone to activate android auto through a wired method.

2) Please make sure that android auto on your android phone is the last version. If not, please log in to your google play account to update to the latest version.

3) Please turn off the Bluetooth of your phone and enter the mobile application management to search auto to clear the auto cache. After the cleaning is completed, Restart the adaptor and reconnect to Bluetooth.

1) Please check if the iPhone/Android smartphone’s Bluetooth is connected to other devices such as Earphones, watches, etc. If so, please disconnect other auto-connected Bluetooth devices or turn of the Bluetooth directly for CarPlay and connect to your vehicle Bluetooth for android auto.

2) When on a call, check that your “Audio” output option is CarPlay/Android Auto.

We need to connect the Bluetooth, not Wi-Fi. After Bluetooth matching is successful, Wi-Fi will automatically connect. So no need Wi-Fi password. Make sure your Wi-Fi is turned on and unoccupied when pairing.

When enjoying the wireless android auto adaptor function, the phone’s Wi-Fi will be occupied by the adaptor. So you cannot use other internet at the same time. You only can use your phone SIM card internet.

1) Please make sure that the Bluetooth and Wi-Fi functions of your mobile phone are turned on and the Bluetooth is not occupied when you get in the car.

2) Clear the pairing record, restart the phone and repair the adaptor.

The adaptor can be paired with a maximum of five phones, but only one device can be connected at a time. If you would like to pair it with a new phone, please cancel the current connection first. Please note, by Bluetooth function default, the adaptor’s system will only auto-connect back to the last used phone.

Please make sure the ANKO JLR-80640 wireless CarPlay Android auto adaptor power indicates a green light is on and make sure you plug the adaptor into the port that is for wired CarPlay/ Android auto. If convenient, please test it with another Phone. If only a specific phone cannot find the Bluetooth or Wi-Fi of the adaptor please try to reset the network and Bluetooth settings of this Phone and then restart the phone once. If the same problem happens on another Phone, it will be defective.