ALTEC LANSING MIX 2.0 IMW997 (01) PDF Document

The box for the ALTEC LANSING MIX 2.0 IMW997 contains:

– IMW997 Mix 2.0 Rugged Bluetooth Speaker

– AC Adapter

The controls and ports on the ALTEC LANSING MIX 2.0 IMW997 are:

Top Panel:

– Color Change Button

– Power Button

– Answer Calls / Voice Assistant Button

– Volume Dial

– Bass Control Button

– NFC Contact Point

– Next Track Button

– Bluetooth Button

– Previous Track Button

Back Panel (under a cover):

– USB Ports

– DC In Port

– AUX In Port

– Reset

To charge the ALTEC LANSING MIX 2.0 IMW997, connect the included AC adapter to the DC In port on the speaker and plug it into a wall outlet. A full charge takes 4-5 hours.

The indicator light on the ALTEC LANSING MIX 2.0 IMW997 shows the charging status:

– A solid red light means the speaker is currently charging.

– The light will turn off when the speaker is fully charged.

1. Press and hold the Power button for 2-4 seconds to turn the speaker on.

2. The speaker will enter pairing mode, indicated by a flashing blue light.

3. On your mobile device, go to the Bluetooth settings and select “Mix 2.0” from the list of available devices.

4. A solid blue light on the speaker indicates that it has been successfully paired.

For NFC-enabled phones, ensure NFC is turned on, then simply touch the back of your phone to the NFC Contact Point on the top of the speaker to pair.

1. First, connect one speaker to your device via Bluetooth.

2. On this first speaker, press and hold the Bluetooth button for 2-3 seconds. The light will flash rapidly, indicating it is ready to pair with a second speaker.

3. Turn on your second speaker.

4. Press the Bluetooth button on the second speaker while the green light is flashing on the first speaker.

5. A solid green light will stay lit on both speakers, confirming they are connected in True Wireless Stereo Mode.

After connecting two speakers in True Wireless Stereo Mode, you can tap the Bluetooth button on either speaker to switch to Left & Right channel separation mode. Tap the button again to switch back to no separation mode.

To activate the “Just Ask” feature and speak to Siri or Google Assistant, press the Answer Calls/Voice Assistant button on the speaker.

Press the Color Change button to toggle between the different light modes. The available modes are:

– Multi color slow fade (with center light)

– Multi color flash (with center light)

– White color pulse to music (center light white color flash)

– Multi color pulse to music (center light multi color flash)

– White color slow fade (with center light)

– Solid Blue (with center light)

– Multi color change (with center light)

– Off

Additionally, you can press and hold the Color Change button for 2 seconds to turn the left and right side white lamps on or off.

– Play/Pause: Press the Bluetooth button.

– Next Track: Press and hold the Next Track (►►|) button.

– Previous Track: Press and hold the Previous Track (|◄◄) button.

– Volume Up/Down: Turn the Volume Dial.

– Turn Bass On/Off: Press the Bass Control Button.

– To Answer or End a Call, press the Answer Call button.

– To Ignore a Call, press and hold the Answer Call button.

– To Increase Volume during a call, turn the volume dial.

– Disconnect Bluetooth: Press and hold the Bluetooth button for 5 seconds. The device will beep.

– Reset All Connections: Press and hold the Bluetooth button for 10 seconds. The device will beep twice.