ALTEC LANSING HYDRABLAST EVERYTHINGPROOF IMW1300 (01) PDF Document

The box for the ALTEC LANSING HYDRABLAST EVERYTHINGPROOF IMW1300 contains the following items:

• IMW1300 HydraBlast Everythingproof™ Wireless Speaker

• Wall Charger

• Carabiner

• USB-C Charging Cable

The ALTEC LANSING HYDRABLAST EVERYTHINGPROOF IMW1300 features the following buttons and ports:

Top Buttons:

• Power Button

• Link Button

• Color Change Button

• Volume Down/Previous Track

• Answer Calls/Voice Assistant

• Volume Up/Next Track

Side Ports:

• USB-C Charging Port

• USB Port

• Reset

To charge the ALTEC LANSING HYDRABLAST EVERYTHINGPROOF IMW1300, connect the USB-C charging cable to the USB-C charging port on the speaker. A full charge takes approximately 3-4 hours. The indicator light is red while charging and turns off when charging is complete.

To use the wireless charging pad on the ALTEC LANSING HYDRABLAST EVERYTHINGPROOF IMW1300:

• Place a Qi compatible device on the wireless charging pad to charge it.

• Make sure that your device is positioned correctly on your charging pad.

• Make sure that there are no other objects on the charging pad.

• Make sure to remove any phone covers before using the wireless charging.

• When using Qi charging, if the speaker’s volume is greater than 50%, it will be automatically reduced to 50% to conserve battery.

1. Press and hold the Power button for 1-2 seconds to turn the speaker on.

2. The speaker will enter pairing mode, indicated by a flashing blue light.

3. On your Bluetooth compatible device, enable Bluetooth and select “AL HydraBlast” from the list of available devices.

4. Once paired, the light on the speaker will turn solid blue.

The speaker controls are divided into press and press & hold functions:

PRESS (Single Press):

• + button: Volume Up

• – button: Volume Down

• Play/Pause button: Play/Pause

• Microphone button: Answer & End Call

PRESS & HOLD (2 seconds):

• Power button: ON/OFF

• + button: Next Track

• – button: Previous Track

• Microphone button: Reject Incoming Call

1. Turn on the first speaker and connect it with a Bluetooth compatible device.

2. Turn on the second speaker and press the Link button. The Link button on the second speaker will flash green, indicating it is in pairing mode.

3. On the first speaker, press and hold the Link button for 2-3 seconds.

4. The Link buttons on both speakers will illuminate solid green, indicating the speakers have paired together.

When connected, True Wireless uses the speakers as left and right channels to create a cinematic experience. To disconnect the True Wireless function, power off one of the units.

Just Ask (Voice Assistant):

• Press the microphone button to activate JUST ASK (Siri or Google Assistant).

Reset Functions:

• Disconnect Bluetooth: Press and hold the microphone button for five seconds. The speaker will beep.

• Reset All Connections: Press and hold the microphone button for ten seconds. The speaker will power off.

To toggle between the different light modes, press the Color Change button (sun icon). To change the Strobe light modes, press and hold the Color Change button for 1-2 seconds. The strobe cycle is: off -> Pulse to music -> Blink -> off.

You can toggle between the following 12 light modes:

1. Multicolor slow transition

2. Single color pulse to music

3. Multi color pulse to music

4. Single color slow fade

5. Single color

6. Multicolor cycle changed

7. Multicolor fast changed with background color

8. Multicolor slow fade

9. Four color slow fade

10. Four color rotation with pulse to music

11. Four color rotation

12. Off