Free English ALLITY APB-200-20K130W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ALLITY APB-200-20K130W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the smart choices and detail settings for the ALLITY APB-200-20K130W?
The settings for the ALLITY APB-200-20K130W can be configured using the selectors as described in the following table:
| Smart Choices | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Maximum reachable lux value | 2000 lux | 300 lux | |||
| Daylight mode | Lux Enable | Lux Disable | |||
| Hold time | 60 sec | 5 min | 30 min | ||
| Corridor function active after | 1 min | 30 min | 60 min | ||
| Nightlight mode | Night ON | Night OFF | |||
| Nightlight active for | 10 min | 30 min | Always ON |
| Detail Setting | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Standby dim level | 10% | 20% | 30% | ||
| Daylight harvesting threshold | 5 lux | 15 lux | 30 lux | 50 lux | |
| Daylight harvesting | Harvesting ON | Harvesting OFF | |||
| PIR/HF ON/OFF | PIR/HF ON | PIR/HF OFF | |||
| PIR/HF sensitivity | 75% | 100% | 25% | 50% | 10% |
What are the safety precautions for using the ALLITY APB-200-20K130W?
Please observe the following safety precautions when using the ALLITY APB-200-20K130W:
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Installation and maintenance must be carried out by a qualified electrician, in accordance with local wiring regulations.
Make sure that the electrical supply is switched off before installation or maintenance.
Do not use in areas with limited ventilation or outside the rated ambient temperature range.
Do not stare at the operating light source.
Do not use this product if it has been damaged. Do not attempt to repair it yourself. Contact a qualified person.
Do not modify the product in any way. Modifications will void the warranty and may make the product unsafe.
For indoor use only.
What is the intended use of the ALLITY APB-200-20K130W?
The ALLITY APB-200-20K130W is an LED luminaire for general lighting purposes. It is designed for indoor use in dry, enclosed spaces. The luminaire is equipped with a motion sensor for automatic switching and daylight harvesting for energy savings.
What are the technical specifications of the ALLITY APB-200-20K130W?
The technical specifications are as follows:
Model: APB-200-20K130W
Rating: 220-240V~ 50/60Hz, 13W
Color temp.: 3000K-4000K-5000K
Protection class: II
IP rating: IP20
How do I switch the ALLITY APB-200-20K130W on and off?
Use a wall switch to turn the ALLITY APB-200-20K130W luminaire on or off.
How do I select the light color and brightness on the ALLITY APB-200-20K130W?
To select the light color and brightness, quickly switch the ALLITY APB-200-20K130W luminaire off and on again (within 2 seconds). The light colour will now change from warm white (3000K) to cool white (4000K) to daylight (5000K). The luminaire can also be dimmed by switching it off and on. Once the desired light colour and brightness have been reached, do not operate the switch for at least 8 seconds. The setting will then be saved.
Does the ALLITY APB-200-20K130W have a memory function?
Yes. The ALLITY APB-200-20K130W luminaire has a memory function for the selected light colour and brightness. If the luminaire is switched off for more than 8 seconds, it will start up again with the last selected light colour and brightness when it is switched on again.
How do I connect the ALLITY APB-200-20K130W with Smartlink?
If your ALLITY APB-200-20K130W is equipped with Smartlink, follow these steps for connection:
1. Press the ON/OFF button on the Smartlink remote control.
2. Within 3 seconds, press ON/OFF for the group you wish to connect the luminaire to (e.g. Gr I).
3. If the connection is successful, the luminaire will blink to confirm.
Please check the user manual of the Smartlink remote control for more details.
How do I reset the ALLITY APB-200-20K130W?
To reset the ALLITY APB-200-20K130W, switch the wall switch off and on again 5 times within 10 seconds. The luminaire will blink to confirm the reset. All settings will be restored to their factory defaults.
How should I maintain and clean the ALLITY APB-200-20K130W?
Before cleaning, disconnect the ALLITY APB-200-20K130W luminaire from the mains power. Use a soft, dry cloth to clean the luminaire. Do not use any chemicals, solvents or abrasive cleaning agents.
What should I do if the light on my ALLITY APB-200-20K130W does not work?
If the light does not work, please perform the following checks:
Check if the ALLITY APB-200-20K130W luminaire is switched on at the wall switch.
Check the wiring and connections.
Check the fuse/circuit breaker.
If the problem persists, contact a qualified electrician.
How should I dispose of the ALLITY APB-200-20K130W?
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
What does the recycling symbol on the ALLITY APB-200-20K130W packaging mean?
The packaging of the ALLITY APB-200-20K130W is made from recyclable materials. Please dispose of the packaging in an environmentally friendly manner by using the appropriate collection containers.
How can I save energy when using the ALLITY APB-200-20K130W?
To save energy, switch off the ALLITY APB-200-20K130W luminaire when it is not in use.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ALLITY APB-200-20K130W (01) PDF DOCUMENT