ADLER AD 3049 (01) PDF Document

Step 1. Remove all cartons and labels from the housing and from inside the device between the hotplates.

Step 2. Wipe the hotplates first with a wet cloth and then with a dry damp cloth.

Step 3. Apply a bit of edible oil or other plant fat to the trays, close the device, and plug it into a grounded socket. Set the temperature control knob to the HIGH position.

Step 4. Keep the ADLER AD 3049 running for a few minutes to get rid of manufacturing odor. The device could emit some smoke during this time, which is normal.

Step 5. Clean the unit according to the instructions in the cleaning chapter.

Step 1. Prepare your needed ingredients.

Step 2. Connect the closed ADLER AD 3049 to a grounded socket. Set the temperature control knob to your desired setting: LOW for light-colored waffles or HIGH for darker waffles. The power and ready indicator lamps will light up.

Step 3. Wait about 10 minutes for the device to reach the required temperature, at which point the ready indicator lamp will turn off.

Step 4. Fully open the ADLER AD 3049 and place the previously prepared batter onto the bottom baking tray.

Step 5. Close the device. Do not close the upper housing by force.

Step 6. During operation, the ready indicator lamp will turn on and off, which means the thermostat is maintaining the appropriate temperature of the hotplates.

Step 7. The operation time is approximately 5 to 15 minutes, depending on the ingredients used and taste preference.

Step 8. Fully open the upper housing and remove the finished product using only a wooden or plastic spatula.

Step 9. When finished, unplug the device and allow it to cool down.

The technical specifications are as follows:

Power supply: 220-240V ~ 50/60Hz

Power nom: 1200W

Power max: 1800W

Step 1. Unplug the electric plug after use and wait for the ADLER AD 3049 to cool down before starting the cleaning process.

Step 2. Wipe the baking surfaces first with a wet cloth and then with a dry damp cloth. You can also use a paper towel.

Step 3. For tough dough rests, apply oil and leave it for a few minutes, then gently remove the residue with a wood paddle.

Step 4. Do not use any metal or hard abrasive tools to wipe the interior or exterior of the machine body to avoid scraping the surface of the tray.

Step 5. Do not immerse the ADLER AD 3049 in water.

Accessible surface temperatures can be high when the ADLER AD 3049 is operating. Never touch the hot surfaces of the appliance.

Due to high temperatures, be careful when removing prepared dishes, hot grease, or other hot liquids. Be aware that hot steam may be present during use.

The device contains a heating function. Only touch the intended handles and gripping surfaces, and use heat protection like gloves or similar items.

Do not touch the baking tray or the hot area on the shell until the temperature has cooled down.

Do not move or carry the device during operation. Wait until it has had enough time to cool down.

Do not place products made of cardboard, paper, plastic materials, or other flammable/meltable objects in the ADLER AD 3049.

The power cord should not be placed above the device and should not touch or be located near hot surfaces. Do not place the device under a mains socket.