Free English ADLER AD 1199 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ADLER AD 1199 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I perform the first setup of the ADLER AD 1199?
1. Remove all package material.
2. Charge the device using the USB cable by connecting it to the USB charging port (B2) at the back of the device.
3. Turn on the ADLER AD 1199 using the On/Off button (C1) on top of the device.
4. Turn on your transmitting device, such as a smartphone or tablet.
5. Connect your transmitting device using Bluetooth and pair it with the speaker. Find ADLER AD 1199 and press pair on your transmitting device.
6. Turn on the microphone by pressing and holding the On/Off button (M1) for 3 seconds.
7. The ADLER AD 1199 is now set up and ready to use.
How do I switch input modes on the ADLER AD 1199?
To switch between input modes on the ADLER AD 1199, perform a short press on the On/Off Mode button (C1). The device will cycle through Bluetooth, USB, SD card, and AUX modes.
How can I control the music playback on the ADLER AD 1199?
For basic music control on the ADLER AD 1199:
Use the Play/Pause button (C2) to play or pause the music from the transmitting device.
Use the Plus button (C4) and Minus button (C5) for volume adjustment. A short press increases or decreases volume, while a long press allows you to skip to the last or next song.
How do I change the voice modulation on the ADLER AD 1199 microphone?
The ADLER AD 1199 microphone supports 4 voice modulations plus the original voice. To switch between these modes, press the Microphone button (M5). The available modes are:
1. Baby voice
2. Deep voice
3. Feminine voice
4. Robot voice
5. Original voice
How do I adjust the volume of my singing voice on the ADLER AD 1199?
To change the volume level of your singing or talking voice while using the ADLER AD 1199, you can use the Plus button (M2) and Minus button (M3) located on the microphone.
How do I disconnect and reconnect the Bluetooth connection on the ADLER AD 1199?
To disconnect the Bluetooth connection on the ADLER AD 1199, perform a double press on the On/Off Mode button (C1). This prevents automatic connection or reconnection. Perform a double press again to reconnect to your device.
How do I change the display lights on the ADLER AD 1199?
You can change the display light settings of the ADLER AD 1199 by performing a single press on the Lights button (C3) located on top of the device. To turn the lights on or off, perform a long press on the same button.
What are the technical specifications of the ADLER AD 1199?
The technical details for the ADLER AD 1199 are as follows:
| Built-in battery | 3.7V / 1500 mAh |
| Microphone battery | 500 mAh |
| Bluetooth version | V 5.1 |
| Charging time | 4.5 hours |
| Microphone charge time | 2 hours |
| Playtime | 8 hours at 50% volume |
| Nominal power | 5 W |
| SD / USB playback formats | MP3 / WAV |
| Maximum output power | 8 W |
How do I use the Mode button (M4) on the ADLER AD 1199 microphone?
The Mode button (M4) on the ADLER AD 1199 microphone has multiple functions:
Short press: Cycle through microphone option change, music adjustment, microphone adjustment, and echo adjustment.
Long press: Turn the microphone on or off.
CLICK HERE TO DOWNLOAD ADLER AD 1199 (01) PDF DOCUMENT