Free English HP F200 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HP F200 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I insert a memory card into the HP F200?
Insert the memory card with the gold contacts facing the back of the HP F200. Push the memory card into the slot until it clicks into place.
How do I remove a memory card from the HP F200?
To remove the memory card, push the card to eject it out of the slot. Do not remove or insert the memory card when the HP F200 is turned on, as this may damage the memory card.
How do I mount the HP F200 to a vehicle windshield?
1. Attach the HP F200 to the bracket base. Turn and tighten the car holder and the bracket base to ensure the device is securely locked in place.
2. With the suction-cup laying flat, position the suction-cup on the windshield.
3. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield. Make sure the base is securely locked in place.
How do I adjust the viewing position of the HP F200?
You can rotate the knob on the mount to swivel the HP F200 vertically. You can also rotate the knob to swivel the device horizontally up to 360 degrees.
How do I connect the HP F200 to power in a vehicle?
Use only the supplied car adapter to power up the HP F200 and charge the built-in battery. Connect one end of the car adapter to the USB connector of the device, then plug the other end of the car charger into the cigarette lighter socket of your vehicle. The HP F200 will turn on automatically once the vehicle engine is started.
How do I turn the HP F200 on or off manually?
To manually turn on the HP F200, press the POWER button. To turn the device off, press and hold the POWER button for at least 2 seconds.
How do I enable automatic recording on the HP F200?
1. Press the button to enter the OSD menu.
2. Press the up or down buttons to select Automatic Record and press the OK button.
3. Press the up or down buttons to select On and press the OK button.
4. Press the BACK button to exit the menu.
How do I set the date and time on the HP F200?
1. Press the button to enter the OSD menu.
2. Press the up or down buttons to select Date / Time and press the OK button.
3. Press the up or down buttons to adjust the value and press the OK button to move to another field.
4. Repeat step 3 until the date and time setting is complete.
How do I record videos while driving with the HP F200?
When the vehicle engine starts up and the Automatic Record function is enabled, the HP F200 will automatically turn on and start recording. Recording will automatically stop when the engine is switched off. You can also press the down button to stop recording manually.
How do I record non-driving videos on the HP F200?
1. Press the OK button to start recording.
2. Press the down button to stop recording.
How does Emergency Recording work on the HP F200?
During video recording, you can press the OK button to continuously record the video in one file until the memory card storage is full or the recording is manually stopped. If the Collision Detection function is enabled and a collision is detected, the HP F200 will automatically trigger the emergency recording.
How do I use the LED light on the HP F200?
1. Press the button to enter the OSD menu.
2. Press the up or down buttons to select Auxiliary Light and press the OK button.
3. Press the up or down buttons to select On and press the OK button.
4. Press the button to exit the menu.
Note: Turn off LED lights when the battery is low. When using LED lights for a long time, it may become hot. Take care not to touch the hot LED lights.
How do I take a snapshot with the HP F200?
From the standby screen, press the down button to take a snapshot. If recording is in progress, press the down button to stop the recording first.
How do I playback videos on the HP F200?
1. If recording is in progress, press the down button to stop recording.
2. Press the button to enter the OSD menu.
3. Press the up or down buttons to select File Playback and press the OK button.
4. Press the up or down buttons to select Video or Emergency and press the OK button.
5. Press the up or down buttons to browse for the desired video file and press the OK button to play the video.
6. Press the OK button to pause the playback. Press it again to resume.
How do I view photos on the HP F200?
1. If recording is in progress, press the down button to stop recording.
2. Press the button to enter the OSD menu.
3. Press the up or down buttons to select File Playback and press the OK button.
4. Press the up or down buttons to select Picture and press the OK button.
5. Press the up or down buttons to browse for the desired photo file and press the OK button to view the file in full screen.
How do I delete files on the HP F200?
1. If recording is in progress, press the down button to stop recording.
2. Press the button to enter the OSD menu.
3. Press the up or down buttons to select File Deletion and press the OK button.
4. Press the up or down buttons to select the file category and press the OK button.
5. Press the up or down buttons to select the file that you want to delete and press the OK button to enter the Delete menu.
6. Press the up or down buttons to select an option (Delete One or Delete All) and press the OK button to confirm.
What are the menu options available for the HP F200?
| Menu option | Description | Available option |
|---|---|---|
| Auxiliary Light | Enable/Disable the LED light. | On / Off |
| File Playback | Select the file category that you want to view. | Video / Emergency / Picture |
| Date / Time | Set the date and time. | |
| Time Stamp | Enable/Disable the date stamp. | On / Off |
| Resolution | Set the video resolution. | 1080P(1920×1080) / 720P(1280×720) |
| LCD Setting | Set the duration for the display to automatically turn off right after video recording starts. | On / Turn Off After 30 Sec. / Turn Off After 3 min. / Off |
| Voice Record | Enable/Disable the voice recording. | On / Off |
| Beep | Enable/Disable the beep. | On / Off |
| Automatic Record | Enable/Disable the device to automatically record video after the device is turned on. | On / Off |
| Record Interval | Set the recording duration for each recorded video file. | 3 mins / 5 mins |
| Motion Detection | Enable/Disable the motion detection. If this function is enabled and the device detects any object movement, it will automatically start the recording. | On / Off |
| Collision Detection | Enable/Disable the collision detection. If this function is enabled and any collision is detected, the device will automatically trigger the emergency recording. | High Sensitivity / Normal Sensitivity / Low Sensitivity / off |
| Delay Shutdown | Set the delay duration before turning off the power. | 10 Sec. / Off |
| Language | Set the on-screen display menu language. | |
| File Deletion | Delete the file(s). | Video / Emergency / Picture |
| TV standard | Set the TV type based on your local region. | NTSC / PAL |
| Format | Format the memory card. | Yes / No |
| Default | Reset all settings to factory default settings. | Yes / No |
What are the technical specifications of the HP F200?
| Item | Description |
|---|---|
| Image sensor | 1/3.2” CMOS sensor |
| Effective pixels | 2592 (H) x 1944 (V) |
| Storage media | Support Micro SDHC, up to 32GB class 4 or above |
| LCD display | 2.4” LCD color TFT (112K pixels) |
| Lens | Wide Angle Fixed Focus lens F2.4, f=3.0mm |
| Focus range | 1.5m~Infinity |
| Movie Clip | Resolution: Full HD (1920 x 1080), 30fps; HD (1280 x 720), 30fps; Format: .mov |
| Still image (Snapshot) | Resolution: 5M (2592 x 1944); Format: DCF (JPEG, Exif: 2.2) |
| Shutter | Electronic shutter Auto:1/2 ~1/2000 sec. |
| G-Sensor | 3-Axis G-Force sensor |
| ISO | Auto |
| White Balance | Auto |
| Assist Lamp | Yes |
| Microphone | Yes |
| Speaker | Yes |
| Interface | Mini USB, Mini C Type HDMI |
| Battery | Built-in 470mAH Li-polymer rechargeable |
| Operating Temperature | -10° ~ 60° C |
| Operating Humidity | 20 ~ 70% RH |
| Storage Temperature | -20° ~ 80° C |
| Dimensions | 67.8 x 62 x 30 mm |
| Weight | Approx. 85g |
CLICK HERE TO DOWNLOAD HP F200 (01) PDF DOCUMENT